Long-term microleakage trends in access cavities conditioned with phosphoric acid and deproteinizing agent for root-canal-treated teeth: an investigation of fluid filtration and microscopy analysis

This study evaluated the long-term microleakage of access cavities conditioned with phosphoric acid and deproteinizing agents for root-canal-treated teeth using fluid filtration and microscopical analysis. Occlusal surfaces of extracted human mandibular premolars (N = 90) were removed leaving a 4 mm coronal length from the cemento-enamel junction. After root canal treatment, the specimens were randomly divided into four experimental groups (n = 21) and the remaining teeth were used for positive control group (n = 6): SB: 35% H₃PO₄ + Adper Single Bond 2; SSB: 35% H₃PO₄ + 5.25% NaOCl + 10% Sodium ascorbate (C₆H₇NaO₆) + Adper Single Bond 2; XP: 35% H₃PO₄₊XP Bond; SXP: 35% H₃PO₄₊5.25% NaOCl + 10% Sodium ascorbate + XP Bond. All cavities were restored with a resin composite (Filtek Z250). After removing the root filling from the apical side, teeth were subjected to fluid filtration test for 1 week, 6 and 12 months followed by ×2500 thermocycling after 1st week and 6th months each. Data were analyzed using one-way ANOVA and Dunnet T3 tests (α = 0.05). SEM analyses were carried out after each microleakage evaluation in two random teeth from all groups. Microleakage values in groups SB and XP presented no significant difference in any of the evaluated period (p > 0.05). Microleakage results of SXP (0.01665) group showed significant difference compared to XP (0.03377) and SB (0.03049) groups after 12 months. SSB group (0.00901) showed significantly less microleakage among all other groups (0.01665–0.03377) (p < 0.05). Prior to endodontic treatment, in access cavities, acid etching with 35% H₃PO₄ followed by the application of NaOCl and sodium ascorbate completely destroyed the collagen layer, reducing the microleakage and resin–dentin interface degradation up to 12 months.     

Assessment of the performances of multilayer perceptron neural networks in comparison with recurrent neural networks and two statistical methods for diagnosing coronary artery disease

Abstract: We aimed to examine the diagnostic performances of multilayer perceptron neural networks (MLPNNs) for predicting coronary artery disease and to compare them with different types of artificial neural network methods, namely recurrent neural networks (RNNs) and two statistical methods (quadratic discriminant analysis (QDA) and logistic regression (LR)). MLPNNs were trained with backpropagation, quick propagation, delta-bar-delta and extended delta-bar-delta algorithms as classifiers; the RNN was trained with the Levenberg–Marquardt algorithm; LR and QDA were used for predicting coronary artery disease. Coronary artery disease was classified with accuracy rates varying from 79.9% to 83.9% by MLPNNs. Even though MLPNNs achieved higher accuracy rates than the statistical methods, LR (73.2%) and QDA (58.4%), their performances were lower compared to the RNN (84.7%). Among the four different types of training algorithms that trained MLPNNs, quick propagation achieved the highest accuracy rate; however, it was lower than the RNN trained with the Levenberg–Marquardt algorithm. RNNs, which demonstrated 84.7% accuracy and 86.5% positive predictive rates, may be a helpful tool in medical decision making for diagnosis of coronary artery disease.     

Heat transfer enhancement in a tube using circular cross sectional rings separated from wall

A numerical study was undertaken for investigating the heat transfer enhancement in a tube with the circular cross sectional rings. The rings were inserted near the tube wall. Five different spacings between the rings were considered as p = d/2, p = d, p = 3d/2, p = 2d and p = 3d. Uniform heat flux was applied to the external surface of the tube and air was selected as working fluid. Numerical calculations were performed with FLUENT 6.1.22 code, in the range of Reynolds number 4475–43725. The results obtained from a smooth tube were compared with those from the studies in literature in order to validate the numerical method. Consequently, the variation of Nusselt number, friction factor and overall enhancement ratios for the tube with rings were presented and the best overall enhancement of 18% was achieved for Re = 15,600 for which the spacing between the rings is 3d.     

Plasma polymerization‐modified bacterial polyhydroxybutyrate nanofibrillar scaffolds

The design and the development of novel scaffold materials for tissue engineering have attracted much interest in recent years. Especially, the prepared nanofibrillar scaffold materials from biocompatible and biodegradable polymers by electrospinning are promising materials to be used in biomedical applications. In this study, we propose to produce low‐cost and cell‐friendly bacterial electrospun PHB polymeric scaffolds by using Alcaligenes eutrophus DSM 545 strain to PHB production. The produced PHB was characterized by Nuclear Magnetic Resonance (NMR) and Fourier Transform Infrared Spectroscopy (FTIR). Nanofibrous scaffolds were fabricated via electrospinning method that has a fiber diameter approximately 700–800 nm. To investigate cell attachment, cell growth, and antioxidant enzyme activity on positively and negatively charged PHB scaffold, PHB surface was modified by plasma polymerization technique using polyethylene glycol (PEG) and ethylenediamine (EDA). According to the results of superoxide dismutase (SOD) activity study, PEG‐modified nanofibrillar scaffolds indicated more cellular resistance against oxidative stress compared to the EDA modification. As can be seen in cell proliferation results, EDA modification enhanced the cell proliferation more than PEG modification, while PEG modification is better as compared with nonmodified scaffolds. In general, through plasma polymerization technique, surface modified nanofibrillar structures are effective substrates for cell attachment and outgrowth. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

NaOH impregnated sepiolite based heterogeneous catalyst and its utilization for the production of biodiesel from canola oil

NaOH/sepiolite nanocomposite heterogenous base catalyst (NaOH/sep.) was prepared via impregnation process and tested in a three-neck flask equipped with thermometer and reflux condenser for the production of biodiesel from transesterification of canola oil in an excess amount of methanol. The ratio of NaOH and sepiolite was selected as 1:4. The influence of various operational parameters was examined such as methanol to oil molar ratio, catalyst dosage, and reaction temperature. Untreated sepiolite and NaOH loaded sepiolite were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, Scanning electron microscopy and Energy dispersive spectroscopy analysis. Overall NaOH/sep. based biodiesel production yield was examined by the help of Gas chromatography-mass spectrometry analysis. The yield was calculated from the peak areas as 80.93% which is better than that of expensive catalysis system using studies.     

Fatty acid composition in some selected marine fish species living in Turkish waters

The muscle fatty acid (FA) composition of 12 selected marine fish species living in Turkish waters was determined. FA profiles of muscle were compared in terms of total and individual saturated (SFAs) and unsaturated fatty acids. Total SFA, monounsaturated fatty acid (MUFA), n‐3 polyunsaturated fatty acid (n‐3 PUFA) and n‐6 polyunsaturated fatty acid (n‐6 PUFA) contents as well as n‐3/n‐6 FA and eicosapentaenoic acid (EPA)/docosahexaenoic acid (DHA) ratios differed (P < 0.01) in all fish species. Palmitic acid (16:0) among total SFAs, oleic acid (18:1n‐9) among MUFAs, DHA (22:6n‐3) among n‐3 PUFAs and 18:2n‐6 and 20:4n‐6 among n‐6 PUFAs were the most abundant FAs. The ratio of n‐3/n‐6 PUFA contents, indicating the availability of n‐3 PUFAs that are beneficial for human health, ranged from 2.67 to 12.61. The EPA/DHA ratio was between 0.17 and 0.83 in the marine fish species studied. Copyright © 2005 Society of Chemical Industry     

On the synthesis of certain straight-line mechanismsSur la synthese des mechanismes reproduisant des droites

A direct method is presented for the synthesis of a large class of approximate straight line mechanisms based on a set of two equations describing the center of curvature of the path (the coupler curve) of an arbitrary point on the coupler of a crank-slider mechanism with an off-set. Several examples are discussed to establish the capability of the proposed set of equations to incorporate the classical approximate straight-line mechanisms (e.g. Watt, Chebyshev and Scott-Russell) as the special cases of the synthesis which can be constructed directly based on graphical considerations. A straightforward design of a luffing-crane mechanism and a graphical construction of a special mechanism which generates two mutually orthogonal straight lines are also presented to further illustrate the general versatility of the proposed method of synthesis.     

Evaluation of the Design, Planning, Construction Phases, and Structural Content of Permanent Residential Dwellings Built after the 1999 Eastern Marmara Earthquakes in Turkey

The aim of this study is to survey and evaluate permanent housing structures built after the Marmara earthquakes based on the principles of earthquake resistant design of reinforced concrete structures. The seismicity of Turkey requires immediate attention as there is a high probability of another major earthquake event in the next 30?years in Istanbul. The classification of structural systems, the damage patterns and behaviors of structural systems, and structural and nonstructural components under lateral earthquake loads, are analyzed. Based on this analysis, reliable structures can be built without overextending the Turkish economy, and loss of life and structural damage can be reduced by designing structures with greater earthquake energy dissipation capacity. The selection of project areas and the strength of the structural system are thoroughly analyzed taking postearthquake public psychology into account. Structural characteristics of permanent housing built subsequent to the Marmara earthquakes are critiqued and documented with a case study.     

Effects of sowing and harvesting dates on yield and some quality characteristics of crops in sugar beet/cereal rotation system

BACKGROUND: Cereals are the main crops in rotation following sugar beet harvest. However, a delay in planting winter cereals as a result of late sugar beet harvest is a disadvantage in sugar beet/cereal rotations. In this study, field trials were carried out to investigate the effects of sowing and harvesting dates on the yield and quality of sugar beet (Beta vulgaris L.) and cereals (wheat, Triticum aestivum L., and six‐rowed barley, Hordeum vulgare L.) during two consecutive years. Beet was sown on three dates and harvested on four dates, followed by cereals which were sown on four dates. Root yield and digestion ratio (sugar beet) and grain yield, 1000‐kernel weight, test weight and protein content (wheat and barley) were determined. RESULTS: The highest root yield (52.53 t ha^?1) was obtained from early sown (5 April) and late harvested (1 November) beet, while the highest digestion ratio (17.4%) was obtained from late sown (3 May) and late harvested (1 November) beet. Lower cereal grain yields were obtained from later sowings. The highest grain yields (5.87 and 6.02 t ha^?1) were obtained from earlier sown wheat. Protein content was also affected by sowing date, which appeared to be very important under unstable climatic conditions. CONCLUSION: It is essential to consider the timing of sowing of cereal crops when unstable climatic conditions are present. Hence sowing date recommendations in regular climatic conditions may be misleading for countries dependent on winter rainfall for cereal production. Copyright © 2007 Society of Chemical Industry