An enhanced radio resource management based MIH policies in heterogeneous wireless networks

The require of omnipresent wireless access and high data rate services are expected to increase extensively in the near future. In this context, heterogeneous networks, which are a mixture of different wireless technologies (LTE-advanced, LTE-advanced Pro, C-IoT (Cellular Internet of Thing), 5G WiFi, etc) are invited to enable important capabilities, such as high data rates, low latencies and efficient resource utilization in order to provide dedicated capacity to offices, homes, and urban hotspots. Mixing these technologies in the same system, with their complementary characteristics, to afford a complete coverage to users can cause various challenges such as seamless handover, resource management and call admission control. This article proposes a general radio resource management framework which can be supported by future network architectures. A combined call admission control, resource reservation algorithm and bandwidth adaptation based IEEE 802.21 MIH standard approach for heterogeneous wireless network is detailed in this framework. Our aims are to guarantee quality of service (QoS) requirements of all accepted calls, reduce new call blocking probability and handover call dropping probability, and maintain efficient resource utilization. Performance analysis shows that our proposed approach best guarantees QoS requirements.     

Design of a compact size tag antenna based on split ring resonator for UHF RFID application

In this article, a new design of miniaturized split‐ring resonator antenna using a meander line technique with a simple impedance matching method applicable to UHF‐RFID tags is presented. The new approach is based on the integration of a meander line into the radiating element of SRR to reduce the electrical tag size and a theoretical demonstration to calculate the conjugate impedance matching and directly attach the antenna with the chip. The new SRR antenna, which is printed on the flexible substrate Arlon CuClad 250LX, is designed using Alien Higgs 3 RFID ASIC whose input impedance is 25‐j190. The prototype antenna has a low‐cost compact size (18.28 mm × 18.28 mm) with a read range higher than 4 m within the RFID UHF band and with a roughly 4.2‐m peak range at 915 MHz. As a proof of behavior, a tag prototype is fabricated and measured to operate at a UHF RFID band. Based on some works' results, an optimized design is obtained with a 48% size reduction compared with the classic split ring resonator antenna and with a good impedance matching the antenna with RFID ASIC without the need for any external matching network.     

Improved Geometric Anisotropic Diffusion Filter for Radiography Image Enhancement

In radiography imaging, contrast, sharpness and noise there are three fundamental factors that determine the image quality. Removing noise while preserving and sharpening image contours is a complicated task particularly for images with low contrast like radiography. This paper proposes a new anisotropic diffusion method for radiography image enhancement. The proposed method is based on the integration of geometric parameters derived from the local pixel intensity distribution in a nonlinear diffusion formulation that can concurrently perform the smoothing and the sharpening operations. The main novelty of the proposed anisotropic diffusion model is the ability to combine in one process noise reduction, edge preserving and sharpening. Experimental results using both synthetic and real welding radiography images prove the efficiency of the proposed method in comparison with other anisotropic diffusion methods.     

Crosslinking of Sericin on air atmospheric plasma treated polyester fabric

Durable and highly hydrophilic polyester fabric was produced by cross-linking Sericin on air-atmospheric plasma treated polyester fabric. Surface change properties were characterized by wettability measurements (water contact angle-WCA and % capillarity), Atomic Force Microscopy and zeta potential measurements. Chemical analyses using TBO dye were carried out to estimate surface functional groups after plasma treatment and Sericin cross-linking. Positive zeta potential values at low pH values, as well as AFM images confirm grafting of Sericin. With Sericin cross-linked onto both cleaned PET and plasma-treated PET, WCA reached that of PET subjected to plasma treatment alone, that is WCA between 40° and 46° compared to 81° for the hydrophobic untreated polyester fabric. However, plasma-treated polyester is readily subjected to aging, while cross-linked Sericin on plasma-treated PET yields a more durable hydrophilic finish with a high capillarity, 85% compared to 39% for Sericin on the untreated PET, and 3% for the untreated PET fabric. Plasma treatment creates chain-scissions at the polymer surface leading to the appearance of polar groups which promote the cross-linking of greater amount of Sericin.     

Analysis of a new annular multi-slits antenna using wave concept iterative process in cylindrical coordinates

In this paper, a new antenna for satellite applications is proposed. This antenna is designed to operate at any frequency desired. It consists of a circular microstrip patch antenna which incorporates concentric annular slits, and it is printed on a grounded substrate. The details of the proposed antenna design and numerical results are presented and discussed. The wave concept iterative procedure in cylindrical coordinates is used to analyze this new antenna. Using the proposed procedure, less computing time and memory are needed to calculate the electromagnetic parameters of the annular multi-slits antenna.     

Directions of arrival estimation with planar antenna arrays in the presence of mutual coupling

Directions of arrival (DoAs) estimation of multiple sources using an antenna array is a challenging topic in wireless communication. The DoAs estimation accuracy depends not only on the selected technique and algorithm, but also on the geometrical configuration of the antenna array used during the estimation. In this article the robustness of common planar antenna arrays against unaccounted mutual coupling is examined and their DoAs estimation capabilities are compared and analysed through computer simulations using the well-known MUltiple SIgnal Classification (MUSIC) algorithm. Our analysis is based on an electromagnetic concept to calculate an approximation of the impedance matrices that define the mutual coupling matrix (MCM). Furthermore, a CRB analysis is presented and used as an asymptotic performance benchmark of the studied antenna arrays. The impact of the studied antenna arrays geometry on the MCM structure is also investigated. Simulation results show that the UCCA has more robustness against unaccounted mutual coupling and performs better results than both UCA and URA geometries. The performed simulations confirm also that, although the UCCA achieves better performance under complicated scenarios, the URA shows better asymptotic (CRB) behaviour which promises more accuracy on DoAs estimation.     

Study of C.I. Reactive Yellow 145, C.I. Reactive Red 238, and C.I. Reactive Blue 235 dyestuffs in order to use them in color formulation. Part 1: characterization and compatibility

Generally, textile dyeing is based on a mixture of several dyestuffs used in different proportions to achieve the desired-colors. The dyes used in a mixture should react with the fiber similarly; thus they must be compatible among themselves. So, to realize mixtures it is indispensable to study the compatibility of dyes, in order to ensure optimal dyeing formulation. This paper describes the characterization and studies the compatibility of three cold bifunctionnal reactive dyes (C.I. Reactive Yellow 145, C.I. Reactive Red 238, and C.I. Reactive Blue 235) in order to explore the possibility to use them in mixtures. The dye compatibility was studied based on several criteria such as dye extinction coefficients, exhaustion and fixation yield rates, adsorption kinetics, and adsorption isotherms. The exhaustion and fixation yield rates of all three dyes was compared between them and their adsorption kinetics and adsorption isotherms models were drawn and discussed. Between the different studied models, the Elovich model presents the best model describing the kinetics of different dyes, and Freundlich model presents the best model for analyzing the adsorption isotherms. The obtained results show that the analyzed dyes are perfectly compatible and have the same dyeing properties. They present close extinction coefficients as well as similar exhaustion and fixation yield rates.     

Determination of the natural frequencies of a thin wire elliptical loop

The natural frequencies of a thin wire scatterer formed into an elliptical loop are determined theoretically by solving the homogeneous transform domain electric field integral equation (EFIE). Comparison with frequencies extracted from measurements of the time domain scattered field responses of elliptical and circular loops at various aspects validates the assumption of a natural mode expansion of the late-time response of conducting radar targets.     

Biological treatment of saline wastewaters from marine‐products processing factories by a fixed‐bed reactor

Wastewaters generated by a factory processing marine products are characterized by high concentrations of organic compounds and salt constituents (>30 g dm^?3). Biological treatment of these saline wastewaters in conventional systems usually results in low chemical oxygen demand (COD) removal efficiency, because of the plasmolysis of the organisms. In order to overcome this problem a specific flora was adapted to the wastewater from the fish‐processing industry by a gradual increase in salt concentrations. Biological treatment of this effluent was then studied in a continuous fixed biofilm reactor. Experiments were conducted at different organic loading rates (OLR), varying from 250 to 1000 mg COD dm^?3 day^?1. Under low OLR (250 mg COD dm^?3 day^?1), COD and total organic carbon (TOC) removal efficiencies were 92.5 and 95.4%, respectively. Thereafter, fluctuations in COD and TOC were observed during the experiment, provoked by the progressive increase of OLR and the nature of the wastewater introduced. High COD (87%) and TOC (99%) removal efficiencies were obtained at 1000 mg COD dm^?3 day^?1. © 2002 Society of Chemical Industry     

Application of genetic algorithm to color recipe formulation using reactive and direct dyestuffs mixtures

Color reproduction is a science in constant development. In this article, a new model to solve the color recipe prediction problem using a genetic algorithm is proposed. The objective is to optimize the color recipe prediction stage by determining the dyes to use in a mixture and their respective proportions to reproduce the target color. Two ranges of dyes were used for dyeing 100% cotton woven fabrics: three reactive dyes (CI Reactive Red 238, CI Reactive Yellow 145, and CI Reactive Blue 235) and four direct dyes (CI Direct Orange 34, CI Direct Red 227, CI Direct Blue 85, and CI Direct Black 22). The criterion of optimization, in reproducing the desired shades, is to minimize the CMC color difference between the desired reference color and the color resulting of the predicted recipe. The proposed algorithm revealed good results with small CMC color differences between target and reproduced colors. The effectiveness of the algorithm was also evaluated and proven by calculating errors between the predicted concentrations in the proposed recipes and the actual concentrations.