Temperature effects on the mass flow rate in the SBI and similar heat‐release rate test equipment

In various medium‐to‐large‐scale fire test equipments like the ISO room corner test (RC), and more recently, the single burning item test (SBI) the mass flow rate measurement of the combustion gases plays a key role in the determination of the heat‐release rate and smoke‐production rate. With the knowledge of the velocity profile and the temperature of the flow, the mass flow rate is obtained by measuring the velocity on the axis of the duct. This is done by means of a bi‐directional probe based on the pitot principle. However, due to the variation of the mean temperature and the temperature gradient in any cross section of the duct, introduced by ever changing combustion gas temperatures, the velocity nor the density profile are constant in time. This paper examines the resulting uncertainty on the mass flow rate. Copyright © 2006 John Wiley & Sons, Ltd.     

A survey on the occurrence of Fusarium mycotoxins in Bavarian cereals from the 1987 harvest

Summary Bavarian cereals and wheat flour from the 1987 harvest were analysed for nivalenol (NIV) and deoxynivalenol (DON) using high performance liquid chromatography (HPLC) and for T-2 toxin and zearalenone (ZEA) by enzyme-linked-immunosorbent as say (ELISA). The study included 190 field samples of wheat, barley, rye and oat with visibly damaged ears, 45 samples of wheat intended for feed production and two series of wheat flour (type 550) and whole wheat flour collected in October 1987 and June 1988. The field samples examined showed a high DON contamination of wheat (87%) with an average of 3.96 mg/kg and a maximum of 43.8 mg/kg. Mean levels between 0.33 mg/kg and 0.27 mg/kg DON could be detected in barley, rye and oat. Of the wheat samples, 58% contained ZEA with a maximum of 1.560 mg/kg. The highest levels of ZEA were detected in samples which also showed high concentrations of DON. The NIV and T-2 toxin levels were comparatively low. Thirty percent of the samples showed NIV concentrations between 0.04 mg/kg and 0.29 mg/kg and 38% contained between 0.005 and 0.60 mg/kg of T-2. In the wheat samples for feed production, only DON was detected with an average of 0.190 mg/kg and a maximum of 0.75 mg/kg. The highest DON levels (0.58 mg/kg) from October 1987 were found in the wheat flour samples which were lower than the highest DON concentration (3.24 mg/kg) detected in the samples collected during June 1988. This fact was probably due to a substantial amount of non-contaminated wheat from 1986. The toxin concentrations in the whole wheat flour were not higher than in the type 550 flour. The regional distribution of the mean DON concentrations showed the highest levels in Middle and Lower-Franconia.

---

Vorkommen von Fusarium Mykotoxinen in bayerischem Getreide der Ernte 1987

Zusammenfassung Cerealien und Weizenmehle der bayerischen Ernte 1987 wurden mittels hochauflösender Flüssigchromatographie (HPLC) auf Nivalenol (NIV) und Deoxynivalenol (DON) Bowie mit Enzymimmunoassay auf T-2 Toxin und Zearalenon (ZEA) analysiert. Die Untersuchungen umfaßten 190 Feldproben von Weizen, Gerste, Roggen und Hafer, die alle optisch erkennbaren Fusarienbefall aufwiesen, 45 Futterweizenproben Bowie zwei Probenserien von Weizenmehlen der Type 550 und Vollkornweizenmehlen, die im October 1987 und im Juni 1988 gezogenwurden. — Die Untersuchungen der Feldproben ergaben eine hohe DON-Kontamination des Weizens (87%) mit einem durchschnittlichen Gehalt von 3,96 mg/kg und einem Maximalgehalt von 43,8 mg/kg. In Gerste, Roggen und Hafer konnten durchschnittlich zwischen 0,33 mg/kg und 0,27 mg/kg DON-nachgewiesen werden. 58% der Winterweizenproben wiesen Zearalenon mit einem Maximalgehalt von 1,56 mg/kg auf. Die höchsten ZEA-Werte wurden in Proben ermittelt, die gleichzeitig einen hohen DON-Gehalt aufwiesen. Die Konzentrationen von NIV und T-2 Toxin waren vergleichsweise niedrig. 30% der Proben hatten NIV-Gehalte zwischen 0,04 mg/kg und 0,29 mg/kg und 38% enthielten T-2 Toxin zwischen 0,005 mg/kg und 0,06 mg/kg. In den Futterweizenproben konnte DON als einziges Toxin mit einem Gehalt von durchschnittlich 0,19 mg/kg und maximal 0,75 mg/kg festgestellt werden. Die Weizenmehle, die im October 1987 gezogen wurden, wiesen maximal 0,58 mg/kg DON auf. Die Gehalte lagen damit medriger als die der Mehlproben vom Juni 1988, die maximal 3,24 mg/kg und durchschnittlich 0,26 mg/kg DON enthielten. Dieser Sachverhalt könnte auf Anteile von nicht kontaminiertem Weizen der Ernte 86 an den im October gezogenen Mehlproben zurückgeführt werden. Die Toxingehalte der Vollkornmehle waren nicht höher als die der Weizenmehle der Type 550. Die höchsten Durchschnittsgehalte von DON wurden in Mittel- und Unterfranken festgestellt.

     

The influence of the ion content of whey on the pH-activity profile of the β-galactosidase from Aspergillus oryzae

The pH-dependence of the reaction kinetics of lactase (β-galactosidase) from Aspergillus oryzae in different reaction media is presented in terms of a two-parameter model. The lactase from A. oryzae seems to have replaced the A. niger lactase on the market owing to a better activity/price ratio and may be utilised for lactose hydrolysis in acid as well as in neutral milk products. Its pH optimum is around pH 4.5. However, in the neutral pH-range its activity depended strongly on the salt content of the substrate solution. For example, its activity in whey (pH 6.5) fell to only 30% of its expected activity in a pure lactose solution at the same pH. The whey effect was the same for both soluble and immobilised lactase. The two parameter kinetic model, which included a term for competitive product inhibition gave excellent agreement with experimental data, and may thus be useful for the prediction of reactor performance with this enzyme.     

Electron-phonon coupling in A3C60: Contributions from intermolecular modes

An accurate tight-binding fit to the full valence-conduction band region in K₃C₆₀ is used to generate deformation potentials for several phonon modes, including the optic intermolecular vibrations and librations that have not been investigated previously. The resulting electron-phonon coupling constants indicate coupling that is likely to be crucial in understanding electronic transport in the fullerides, and will provide contributions to superconducting pairing. Results for the intramolecularA _g (2) “pentagonal pinch” mode suggests nonadiabatic behavior for this (and possibly other) very high frequency modes.     

Numerical investigation of the error on flow measurements due to exhaust gas heating and cooling in the SBI‐configuration

The possible flow measurement error due to heating or cooling of exhaust gases in the Single‐Burning‐Item (SBI) test is estimated from numerical experiments. It is illustrated that there is no one‐to‐one correspondence between the velocity profile shape and the instantaneous Reynolds number, due to the time‐dependent temperature and density profile evolution in the exhaust gas pipe. A non‐ambiguous relation is found between the velocity profile shape and an ‘effective’ Reynolds number, based on the turbulent viscosity. Maximum variations of the velocity correction factors, relating the mean velocity to the velocity on the pipe axis, are found to be in the order of 2% for limiting circumstances for the SBI test. The primary effect is caused by instantaneous Reynolds number variations. The effect of heating or cooling of the flow by the hot or cold pipe is noticeable, too. The statements are proved to be valid independent of the computational grid, the turbulence model and the time steps taken to obtain the numerical solutions. Copyright © 2006 John Wiley & Sons, Ltd.     

Double necking in polymer tensile deformation

After initial necking of tensile polymer samples the deformation front moves along the gauge length at a stress which is smaller than the yield stress. The still undeformed parts of the sample are therefore subjected to conditions which favour deformation by a creep mechanism. If the extension rate is right, secondary necking becomes possible. Boundary conditions are discussed.     

Molecular Genetics of Conjunctival Melanoma and Prognostic Value of TERT Promoter Mutation Analysis

The aim of this study was exploration of the genetic background of conjunctival melanoma (CM) and correlation with recurrent and metastatic disease. Twenty-eight CM from the Rotterdam Ocular Melanoma Study group were collected and DNA was isolated from the formalin-fixed paraffin embedded tissue. Targeted next-generation sequencing was performed using a panel covering GNAQ, GNA11, EIF1AX, BAP1, BRAF, NRAS, c-KIT, PTEN, SF3B1, and TERT genes. Recurrences and metastasis were present in eight (29%) and nine (32%) CM cases, respectively. TERT promoter mutations were most common (54%), but BRAF (46%), NRAS (21%), BAP1 (18%), PTEN (14%), c-KIT (7%), and SF3B1 (4%) mutations were also observed. No mutations in GNAQ, GNA11, and EIF1AX were found. None of the mutations was significantly associated with recurrent disease. Presence of a TERT promoter mutation was associated with metastatic disease (p-value = 0.008). Based on our molecular findings, CM comprises a separate entity within melanoma, although there are overlapping molecular features with uveal melanoma, such as the presence of BAP1 and SF3B1 mutations. This warrants careful interpretation of molecular data, in the light of clinical findings. About three quarter of CM contain drug-targetable mutations, and TERT promoter mutations are correlated to metastatic disease in CM.     

The effect of axial pressure gradient on extruder mixing characteristics

Many twin screw extruders are operated in the starve-fed mode with the majority of the extruder having partially-filled channels. There will always be regions of totally filled channels due to the presence of the die or reverse elements. The authors experimentally show the effect of the change of percent drag flow on the rate of distributive mixing in the co-rotating and counter-rotating twin screw extruder. Optimum operating conditions for distributive mixing are identified experimentally and verified theoretically.     

15 years of processing and dissemination of SPOT-VEGETATION products

Throughout the VEGETATION programme, the Flemish Institute for Technological Research (VITO) uninterruptedly hosted the prime user segment of both VEGETATION 1 and VEGETATION 2 multispectral instruments on board the Satellite Pour l’Observation de la Terre 4 (SPOT 4) and SPOT 5 satellites. Operational since the launch of SPOT 4 in March 1998, and foreseen to continue at least until the end of the SPOT 5 mission (anticipated in spring 2014), this user segment comprises a processing facility (PF), actively receiving, processing, correcting, archiving, and distributing the VEGETATION data and derived added-value products. First and foremost, the VEGETATION programme has been serving the needs of operational users – both institutional and commercial – requesting data in near-real time. However, scientific and educational users too benefited significantly, in particular from VEGETATION’s unique time series of the Earth’s land cover, and more specifically the vegetation cover. Over the years, the centralized archive houses processed data covering the equivalent of 11,000 times the Earth’s surface, and delivered more than 50 terapixels to around 10.000 users. As such, VEGETATION’s mission is a prime example of what Europe wants to achieve through the Global Monitoring for Environment and Security (GMES) initiative: truly operational services providing reliable and up-to-date information.

This article describes the processing facility, the way the data and products are archived, the different dissemination channels as well as the data policy adopted and the users served. One of the recent evolutions, the development of an entirely new product distribution facility (PDF), implemented as part of the Project for On-Board Autonomy – Vegetation (PROBA-V) user segment is discussed.     

Is the particle deposition in a cell exposure facility comparable to the lungs? A computer model approach

Abstract

Cell exposure experiments at the air-liquid interface (ALI) are used increasingly as indicators for health effects and for the impact of aerosols on the lung. Thereby the aerosol particles are kept airborne and can deposit on a cell surface area similar to the human respiratory tract (RT). However, geometry and air flow rates of an ALI system deviate considerably from the RT. As the tissue-delivered particle dose to the lungs (TD) can hardly be measured, computer models of particle deposition are used here to mimic both the particle deposition at ALI and in the RT. An ALI exposure setup (VitroCell GmbH) for an airflow rate of 100 cm³ min^?1 is selected, where the particle deposition model has been verified experimentally. For the RT we use the hygroscopic lung deposition model of Ferron et al. (2013 Ferron, G. A., S. Upadhyay, R. Zimmermann, and E. Karg. 2013. Model of the deposition of aerosol particles in the respiratory tract of the rat. II. Hygroscopic particle deposition. J. Aerosol Med. Pulm. Drug Deliv. 26 (2):101–19. doi:10.1089/jamp.2011.0965.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]). Model runs are performed for the particle deposition and for the deposited particles per surface area in both the ALI and the RT. The results show that the ALI-deposited mass is 1-2 orders of magnitude higher than in the alveolar region, because the surface area of the lung region is substantially larger. A particle size range from 40 to 450 nm is identified, where the ratio of both the deposition in a lung region and the deposition at the ALI varies by a factor less than two. Mean values for this ratio are 31 and 101 for the tracheo-bronchial and the alveolar region, respectively. The same size range is found for the ratio of the deposited particles per surface area in a lung region and at the ALI. For this range the mean surface deposition at the ALI is 23- and 1575-times larger than in the tracheo-bronchial and the alveolar lung region, respectively. The effect is partly compensated by different flow rate and cell size.

Copyright © 2020 American Association for Aerosol Research