Massive transformation and absolute stability

Under carefully chosen conditions, solidification theory may be applied to solid-state transformations, and this has been done here for composition-invariant diffusion transformations. The predictions of the modeling are compared with isovelocity experiments in two iron systems, Fe-7.29 wt pct Cr and Fe-3.1 wt pct Ni. The ferrite to austenite phase transformation is used to demonstrate that stabilization of a planar transformation front at absolute stability is the natural lower velocity limit for a composition-invariant (massive) transformation. The results of the model, which includes nonequilibrium effects, clearly show that steady-state plane-front growth leading to composition invariance can be obtained at various temperatures depending on the growth velocity. In the lower velocity range, at the limit of absolute stability (of the order of 10 μm/s in the systems studied), the transformation interface moves under conditions of local equilibrium, and the temperature corresponds to the lower solvus temperature. At higher velocity (of the order of the interface diffusion rate, which in these systems is of the order of cm/s), the transformation is predicted to proceed at temperatures close to T ₀. At even higher rates, atom attachment kinetic undercooling will decrease the transformation temperature with respect to T ₀. In some cases, this temperature might even drop below the lower solvus. This article is based on a presentation made at the symposium entitled “The Mechanisms of the Massive Transformation,” a part of the Fall 2000 TMS Meeting held October 16–19, 2000, in St. Louis, Missouri, under the auspices of the ASM Phase Transformations Committee.     

Comparison of two methods of surfactant administration and the effect on dosing-associated hypoxemia

OBJECTIVE: The purpose of our study was to test the hypothesis that surfactant dosing through a proximal sideport adapter on an endotracheal tube leads to more dosing-associated hypoxemia compared with a method of dosing that uses a double-lumen endotracheal tube. STUDY DESIGN: Using adequate sample size to compare significant changes in O2 saturation (power > 0.8, alpha < 0.05) we enrolled 36 infants with respiratory distress syndrome in this randomized trial. A 10% change in O2 saturation was considered clinically significant. Nineteen infants received 38 doses of surfactant through the sideport adapter. Seventeen infants received 31 doses of surfactant through the nonventilation lumen of a double-lumen endotracheal tube. Two main outcome measures were assessed: time-averaged O2 saturation values 30 minutes after dosing and the largest absolute fall in O2 saturation for each patient. RESULTS AND CONCLUSIONS: Time-averaged O2 saturation measures were higher in the proximal sideport group (p = 0.02), but the magnitude of difference was probably not clinically significant. No significant difference was detected between groups when we compared largest absolute drop in O2 saturation. Secondary analyses found no effect of birth weight or dose number (second vs third dose) on either outcome measure.     

Screening demand-side management programs with a value-based test

A value-based test is presented for economic screening of electric utility demand-side management (DSM) programs. The widely used least cost test is valid if the programs do not alter the amount or value of energy services provided to customers. But, in general, DSM programs have such effects and, as a result, the value consumers receive is changed. A more general economic efficiency test, the most value test, provides a practical method for considering the effects of DSM on customer value. The version presented allows for multiple load periods and can account for rate impacts on several customer classes. Four typical DSM programs are evaluated as illustrations     

Pentacene-based organic thin-film transistors

Organic thin-film transistors using the fused-ring polycyclic aromatic hydrocarbon pentacene as the active electronic material have shown mobility as large as 0.7 cm²/V-s and on/off current ratio larger than 10⁸; both values are comparable to hydrogenated amorphous silicon devices. On the other hand, these and most other organic TFT's have an undesirably large subthreshold slope. We show here that the large subthreshold slope typically observed is not an intrinsic property of the organic semiconducting material and that devices with subthreshold slope similar to amorphous silicon devices are possible     

Nonlinear self-guiding and switching in an all-fiber device

We study the nonlinear propagation of light in optical fibers in the strong nonlinearity limit. In this limit, the transverse guiding properties are altered and cannot be decoupled from the longitudinal part of the wave equation. We consider a refractive index profile with no bound modes at low intensities and show that stable self-guiding occurs at a critical intensity. This critical intensity is a property of the guide and can be made much lower than the threshold for unstable self-focusing. We consider a particular design for which self-guiding occurs at three orders of magnitude lower than the self-focusing threshold.     

Hardware and software architecture for power quality analysis

This paper presents a novel concept for power quality hardware and software architecture. Software tools related to detection, classification and characterization of power quality events can be integrated into a Distribution Control Center in which the interconnection between different subsystems is being carried out through the Internet allowing flexibility to the system. This system is implemented using wavelet analysis applied in all proposed algorithms. Different power quality events are taken as examples to illustrate the capabilities of the proposed method. The obtained results reveal that the proposed architecture is feasible to be implemented as an integral part of a control center system.The proposed system has the property of fast and accurate detection and classification of any power quality disturbance event and introduces a new PQ index determination that allows characterizing any type of disturbance including the non-periodic signals.     

Wake and aerodynamics loads in multiple bodies—application to turbomachinery blade rows

Two-dimensional, unsteady flow around bodies of complex geometry (or multiple bodies) at high Reynolds number is simulated using the vortex method. This method is modified to take into account the sub-grid scale phenomena through a second order velocity structure function model adapted to the Lagrangian scheme. The dynamics of the body wake is computed using the convection-diffusion splitting algorithm; the convection process is carried out with a Lagrangian Adams-Bashforth time-marching scheme and the diffusion process is simulated using the random walk method. The pressure distribution is obtained using an integral equation derived from the pressure Poisson equation, which was first developed for a single body. Results for the numerical simulation around a linear cascade of airfoils are presented. As the flow is periodic in the y direction, the discrete vortex shedding need only be considered for a reference airfoil. The flow characteristics around the NACA 65-410 series airfoils are calculated and comparisons are made with results available in the literature.     

Evolutionary variants of the human immunodeficiency virus type 1 V3 region characterized by using a heteroduplex tracking assay

Syncytium-inducing (SI) variants of human immunodeficiency virus type 1 (HIV-1) are evolutionary variants that are associated with rapid CD4+ cell loss and rapid disease progression. The heteroduplex tracking assay (HTA) was used to detect evolutionary V3 variants by amplifying the V3 sequences from viral RNA derived from 50 samples of patient plasma. For this V3-specific HTA (V3-HTA), heteroduplexes were formed between the patient V3 sequences and a probe with the subtype B consensus V3 sequence. Evolution was then measured by divergence from the consensus. The presence of evolutionary variants was correlated with SI detection data on the same samples from the MT-2 cell culture assay. Evolutionary variants were correlated with the SI phenotype in 88% of the samples, and 96% of the SI samples contained evolutionary variants. In most cases the evolutionary V3 variants represented discrete clonal outgrowths of virus. Sequence analysis of the six discordant samples that did not show this correlation indicated that three non-syncytium-inducing (NSI) samples had V3 sequences that had evolved away from the consensus sequence but not toward an SI genotype. A fourth sample showed little evolution away from the consensus but was SI, which indicates that not all SI variants require basic substitutions in V3. The other two samples had SI-like genotypes and NSI phenotypes, suggesting that V3-HTA was able to detect SI emergence in these samples in the absence of their detection in vitro. V3-HTA was also used to confirm SI variant selection in MT-2 cells and to examine the possibility of variant selection during virus culture in peripheral blood cells.