A vibrating-tube densimeter for fluids at high pressures and temperatures

A vibrating U-tube apparatus has been developed for determining the densities of pure fluids and fluid mixtures at 10-200 MPa and 323-773 K. Measured parameters areP,T, andr (period of vibration). Fluids are injected into the U-tube at constantP andT. Three or more reference fluids are used to calibrate the response of the instrument. Fluid mixtures are produced by pumping pure fluids into T-junctions on the upstream side of the U-tube using high accuracy syringe pumps. An automated syringe pump is used to maintainP at setpoint ±0.01 MPa.T is controlled to ±0.01 K using a closed-loop, electronic signal amplification/feedback system. For mixtures, a statistically significant number of measurements of r are obtained to account for the effects of small heterogeneities in fluid composition (generally <0.005X;). Typically, density data for 15 fluids can be obtained in a 6- to 8-h period. Considering all of the potential sources of error in the experimentation, conservative estimates of uncertainty are as follows:P, ±0.02 MPa;T, ±0.05 K;p (pure fluids), ±0.0005g.cm^–3; andp (fluid mixtures), ±0.0005-0.0010g-cm^–3.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

Numerical modeling of high-temperature corrosion processes

Numerical modeling of the diffusional transport associated with high-temperature corrosion processes is reviewed. These corrosion processes include external scale formation and internal subscale formation during oxidation, coating degradation by oxidation and substrate interdiffusion, carburization, sulfidation and nitridation. The studies that are reviewed cover such complexities as concentration-dependent diffusivities, cross-term effects in ternary alloys, and internal precipitation where several compounds of the same element may form (e.g., carbides of Cr) or several compounds exist simultaneously (e.g., carbides containing varying amounts of Ni, Cr, Fe or Mo). In addition, the studies involve a variety of boundary conditions that vary with time and temperature. Finite-difference (F-D) techniques have been applied almost exclusively to model either the solute or corrodant transport in each of these studies. Hence, the paper first reviews the use of F-D techniques to develop solutions to the diffusion equations with various boundary conditions appropriate to high-temperature corrosion processes. The bulk of the paper then reviews various F-D modeling studies of diffusional transport associated with high-temperature corrosion.     

Study of the deterioration of acid resins in cyclic duty

Two case studies are presented in which a continuous loss of capacity in two samples of acid resin, are observed over 900 cycles of loading and regeneration. By completing the batch kinetic testing of the resin at different turbulences and calculating the intra-particle diffusion rates of the counter and co-ion, the effect of turbulence on the independence/dependence of the intra-particle diffusion could be established.A systematic loss in capacity and change in kinetics is reported in both case studies and it is postulated that the reason for this is the loss of active sites within the resin matrix. The significance of this observation is that standard tests done for a new resin application could significantly overestimate the commercial performance of the resin concerned. This paper proposes a method in which resin might be studied prior to inclusion in a particular process, with the objective of determining its effective life span.     

A species of Plasmodium from sandhill cranes in Florida

Infections of a species of Plasmodium (subgenus Giovannolaia) were diagnosed in 3 sandhill cranes (Grus canadensis) from north-central Florida. This parasite is close morphometrically to Plasmodium polare; this finding constitutes the first report of a species of Plasmodium from sandhill cranes in North America.     

Assessment of arterial blood flow characteristics in normal and atherosclerotic vessels with the fast Fourier flow method

The purpose of this study was to scrutinize the ability of magnetic resonance imaging (MRI)-performed measurements to compare arterial flow patterns in patients with peripheral arterial occlusive disease (PAOD), healthy volunteers (HV) and endurance athletes (EA). MRI blood flow data were partially repeated with Doppler ultrasound (DUS) with a view to a methodical comparison. Additionally, pulse wave velocity was assessed with the MUFF technique. For this purpose, MRI-performed flow measurements were performed in the common femoral artery in 21 patients with PAOD, in 34 HV and in 12 EA. The analysis included maximum flow velocities (MFV), velocity/time profile (VTP), pulse wave velocity (V _pulse), and vessel diameter (VD). In addition, MFV and VD were observed by DUS in most individuals. The results revealed a significant change regarding arterial blood flow characteristics in patients compared with HV and EA, with respect to the span between the peak positive and negative blood flow velocity in the femoral artery. The pulse wave velocity in patients was markedly elevated compared with healthy individuals. Furthermore, a complete, characteristic change in the VTP could be observed in patients. The methodical comparison between DUS and MRI showed a good correlation. Multi-slice Fourier flow data have indicated markedly increased pulse wave velocity in PAOD patients. Changes in the arterial blood flow can be clearly observed with MRI. In the future, this might offer a noninvasive possibility not only for the evaluation of the stage of the disease, but also for the detection of early, pre-clinical stages of atherosclerosis. This work was presented at the 1997 ISMRM Meeting, Vancouver, Canada and at the 14th Annual ESMRMB Meeting, Brussels, Belgium, 1997.     

Investigation of the secondary phases of Alloy 617 by Scanning Kelvin Probe Force Microscope

Alloy 617 (nickel based austenitic alloy) is a candidate structural material for next generation high temperature nuclear reactor. The secondary phases present in the Alloy 617 has been identified as TiN and M₂₃C₆ by optical microscopy, scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDAX). Surface potentials of these phases have been evaluated by Scanning Kelvin Probe Force Microscope (SKPFM). SKPFM investigation showed higher surface potential of the secondary phases than that of the austenite matrix. The surface potential of the TiN was nobler than that of M₂₃C₆ indicating that these precipitates could act as cathodic sites during oxidation reaction. Difference in the local chemistry of these phases results in variation of the chemical potentials, which in turn could lead to enhanced oxidation at localized areas in the vicinity of the secondary phase precipitates that act as cathodic sites.     

A comparison of the investment in hospital-based obstetrical ultrasound in Wales and Washington state

The purpose of this study was to examine differences in the way Britain and the United States invest in and deploy a new medical technology. We used structured interviews to obtain information on the technical sophistication and approximate replacement value of all hospital-based obstetrical ultrasound machines in every maternity hospital in Washington state and Wales. The supply of hospital-based ultrasound machines--approximately two machines per 1,000 births--was similar in both countries. Wales had fewer advanced ultrasound machines than Washington state, and they were based exclusively in high-volume district general hospitals; there were no obstetric ultrasound machines in the private sector. In Washington state, the majority of advanced machines were in small and medium-sized hospitals, and many private offices had ultrasound machines. The approximate replacement value of hospital-based machines was three times as high per birth in Washington state as in Wales. In the case of obstetrical ultrasound, centralization of facilities, a relatively small private sector, and global budgeting lead to lower expenditures per patient within the National Health Service without compromising access to care.