Blends composed of poly(N‐isopropylacrylamide) and an ethylene/vinyl alcohol copolymer: Thermal and morphological studies

Blends of poly(N‐isopropylacrylamide) (PNIPAM) and an ethylene/vinyl alcohol copolymer (EVAL) were obtained through casting from dimethyl sulfoxide (DMSO) solutions and phase inversion in 50/50 DMSO/H₂O solutions. The miscibility and morphology of the PNIPAM/EVAL blends were investigated with thermal and morphological analysis. Differential scanning calorimetry indicated that the crystallinity of EVAL decreased with increasing PNIPAM content and that the blends cast from DMSO/H₂O solutions were miscible in the melt state. Measurements of the melting point depression allowed the determination of the interaction energy density (B) and Flory–Huggins interaction parameter (χ₁₂) with the Nishi–Wang equation. The negative B and χ₁₂ values obtained were examined in terms of the specific intermolecular interactions between the polymers. Scanning electron micrographs revealed that blends obtained by the casting method led to dense membranes, whereas the phase‐inversion method rendered typical macroporous membranes. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 501–505, 2004     

Molecularly imprinted polymers by phase inversion technique for the selective recognition of saccharides of biomedical interest in aqueous solutions

The purpose of this work was the preparation and characterization of polymeric membranes for the selective recognition of saccharides using molecular imprinting technology associated with phase inversion. A system able to bind saccharides with high selectivity is particularly important in the pharmaceutical sector, since some of these compounds are constituents of molecules which can exert serious toxic effects even at very low concentrations. Two polymeric matrices were prepared using poly(ethylene‐co‐vinyl alcohol) copolymers, with an ethylene molar content of 32% and 44%, and were imprinted with two different saccharide molecules: maltose and 2‐keto‐3‐deoxy‐d ‐manno‐octulosonate (KDO). Matrices imprinted against maltose and KDO showed an easy template extraction, high binding capability and satisfactory selectivity, particularly for the matrix with an ethylene molar content of 44%. © 2017 Society of Chemical Industry     

Hydroxyapatite/gelatin/gellan sponges as nanocomposite scaffolds for bone reconstruction

The aim of this work was the morphological, physicochemical, mechanical and biological characterization of a new composite system, based on gelatin, gellan and hydroxyapatite, and mimicking the composition of natural bone. Porous scaffolds were prepared by freeze–drying technique, under three different conditions of freezing. The morphological analysis showed a homogeneous porosity, with well interconnected pores, for the sample which underwent a more rapid freezing. The elastic modulus of the same sample was close to that of the natural bone. The presence of interactions among the components was demonstrated through the physicochemical investigation. In addition, the infrared chemical imaging analysis pointed out the similarity among the composite scaffold and the natural bone, in terms of chemical composition, homogeneity, molecular interactions and structural conformation. Preliminary biological characterization showed a good adhesion and proliferation of human mesenchymal stem cells.     

Binary blends based on poly(N‐isopropylacrylamide): Miscibility studies with PVA,PVP, and PAA

Blends of poly(vinyl alcohol) (PVA), poly(acrylic acid), (PAA), and poly(vinyl pyrrolidone) (PVP), with poly(N‐isopropylacrylamide) (PNIPAM), were prepared by casting from aqueous solutions. Mechanical properties of PNIPAM/PVA blends were analyzed by stress–strain tests. Differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) were employed to analyze the miscibility between the polymeric pairs. The results revealed that PNIPAM is not miscible with PVA and PVP in the whole range of composition. On the other hand, PNIPAM interacts strongly with PAA forming interpolymer complex due to the formation of cooperative hydrogen bonds. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 743–748, 2004     

Hydrogels of poly(vinyl alcohol) and collagen as new bioartificial materials

Poly(vinyl alcohol) was used to make hydrogels containing various amounts of collagen. These bioartificial materials, made of synthetic and biological polymers, were studied to investigate the effect of the presence of the collagen on the structural properties of the hydrogels. A comparison between thermal and morphological properties of collagen-containing hydrogels and hydrogels of pure poly(vinyl alcohol) was made.     

Template polymerization of sodium vinyl sulphonate in the presence of poly(allylamine) hydrochloride

The radical polymerization in aqueous solution of sodium vinly sulphonate in the presence of poly(allylamine) hydrochloride as a template has been studied using dilatometry and the obtained polyelectrolyte complexes have been characterized by viscosimetric and thermal analysis. The time–conversion curves have shown an unusual trend characterized by a slowing down phase followed by an increase in the polymerization rate. The same trend has been observed at various reaction temperatures, and at different monomer concentrations. The results of the viscosimetric analysis have indicated that the molecular weight of the formed polymer increases by increasing the initial template concentration, the other operating conditions remaining unchanged. The mechanism of this template polymerization is discussed in this paper.     

Comparison between observation of spontaneous movements and neurologic examination in preterm infants

OBJECTIVE: The Prechtl method of qualitative assessment of general movements (GMs) has been shown to be a good predictor of neurologic outcome in fetuses, preterm infants, and term infants. The aim of this study was to compare the results of this new technique with those of traditional neurologic examination and of cranial ultrasonography in preterm infants. METHODS: Serial videotape recordings (with off-line assessment of GMs), ultrasound examination of the brain, and neurologic examinations were performed from birth until about 6 months of corrected age, on a group of 66 preterm infants whose gestational age ranged from 26 to 36 weeks (mean 30.7 weeks). The agreement between the two techniques and their predictive power, with respect to the neurologic outcome at 2 years of corrected age, were evaluated for five different age groups from preterm age to 65 weeks of postmenstrual age. RESULTS: Overall agreement of the neurologic and GM findings was 80.3% and strongly age related (lower during the preterm and term periods and higher thereafter). At all ages the results of GM observation correlated highly with neurologic outcome; they showed higher sensitivity and specificity than the neurologic examination. This held true in particular before term age, when poor neurologic responses might be related to transient complications, and at term age, mainly because of infants with normal neurologic examination results but unfavorable outcome. During the preterm period the ultrasound results showed a better specificity and a lower sensitivity to outcome than GM findings. CONCLUSIONS: The results of this study indicate that quality assessment of GMs should be added to traditional neurologic assessment, neuroimaging, and other tests of preterm infants for diagnostic and prognostic purposes.     

Collagen-based bioartificial materials—evaluation as membranes for extracorporeal blood purification

The preparation of films from blends of collagen and poly(vinyl alcohol) is described and the transport properties of these films are evaluated. Different crosslinking procedures, dehydrothermal crosslinking and crosslinking by glutaraldehyde, have been used. The transport properties of these films have been studied using model solutes such as sodium chloride, vitamin B12 and bovine albumin. The results are compared with those obtained using commercial products such as Cuprophan^® and poly(acrylonitrile) dialysis membranes. The aim of our study was to analyse the effects of different crosslinking methods and the effects of blending with poly(vinyl alcohol) upon the permeation characteristics of collagen-based membranes.     

Physico-chemical and mechanical characterization of hydrogels of poly (vinyl alcohol) and hyaluronic acid

Hydrogels are three-dimensional polymeric networks very similar to biological tissues and potentially useful as soft tissue substitutes and drug delivery systems. Many synthetic polymers can be used to make hydrogels: poly (vinyl alcohol) is widely employed to make hydrogels for biomedical applications. Improvements in the biocompatibility characteristics of synthetic materials could be achieved by the addition of biological macromolecules. The resulting materials named bioartificial polymeric materials could possess the good mechanical properties of the synthetic component and adequate biocompatibility due to the biological component. We have used poly (vinyl alcohol) to make hydrogels containing various amounts of hyaluronic acid. These bioartificial materials were studied to investigate the effect of the presence of the hyaluronic acid on the structural properties of the hydrogels. Thermal, mechanical, morphological and X-ray analyses were performed. A close correspondence between the network consistency and the degree of crystallinity developed in the matrix suggested that the hyaluronic acid, when its content is about 20%, could provide heterogeneous crystallization nuclei for poly (vinyl alcohol) thus increasing the crystallization degree, and consequently, the storage modulus.     

Gellan–adipic acid blends crosslinked by means of a dehydrothermal treatment

Blends of gellan gum (GE) and adipic acid (ADA), at various ratios, were manufactured in the form of films by casting from aqueous solutions and crosslinked by a dehydrothermal treatment (DHT). The materials, before and after DHT, were characterized by both physicochemical tests and cellular adhesion and growth on the film surfaces. The total reflection and spotlight Fourier transform infrared (FTIR) spectroscopy and optical and scanning electron microscopy showed the presence of both GE‐rich and ADA‐rich regions and the formation of ester groups after DHT. Differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical analysis (DMA) showed that the crosslinking by DHT made the materials more thermally stable. The swelling in water, which diminished in the films subjected to DHT, confirmed that the crosslinking enhanced the whole stability of the material. DMA also showed that the behavior of the GE–ADA blends was quite similar to that of some living tissues, such as the skin. The cell cultures indicated that the materials, especially that with a 6 : 10 ADA‐to‐GE ratio, were very able to promote cellular adhesion and proliferation. In conclusion, the GE–ADA crosslinked blends appeared very suitable for a use as biomaterials; in particular, the cell cultures indicated that they might be useful as scaffolds for tissue reconstruction. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010