Cathodic processes in the leaching and electrochemistry of covellite in mixed sulfate–chloride media

The cathodic processes that occur on a covellite (CuS) surface in mixed sulfate–chloride solutions in the absence and presence of copper(II) ions have been studied using potentiostatic transients and cyclic voltammetry at rotating disk electrodes in the potential range 0.3–0.7 V (versus SHE). This range is relevant to the oxidative leaching of this copper mineral in sulfate and chloride lixiviants. Variations in the concentrations of sulfate and chloride ions had a small effect on the cathodic reduction of covellite in the potential range of 0.5–0.3 V, although the presence of chloride ion resulted in a significant increase in the anodic current on the reverse sweep. On the other hand, addition of copper(II) ions resulted in enhanced cathodic currents and subsequent anodic currents in both sulfate and chloride solutions due to reduction of covellite to an undefined reduced copper sulfide species. Reduction of copper(II) to copper(I) ions becomes the preferred cathodic reaction as the concentration of chloride ions increases, becoming mass transport controlled at a rotating disc electrode at potentials below about 0.4 V. Potentiostatic measurements at potentials negative to the mixed potential in acidic chloride solutions have shown that reduction of copper(II) ions is reversible and have been used to estimate the rate of oxidative dissolution of the mineral which value agrees reasonably well with previously reported leaching rates under similar conditions. Reduction of dissolved oxygen has been found to be very much slower that that of copper(II) ions under ambient conditions.     

MEG forward problem formulation using equivalent surface current densities

We present a formulation for the magnetoencephalography (MEG) forward problem with a layered head model. Traditionally the magnetic field is computed based on the electric potential on the interfaces between the layers. We propose to express the effect of the volumetric currents in terms of an equivalent surface current density on each interface, and obtain the magnetic field based on them. The boundary elements method is used to compute the equivalent current density and the magnetic field for a realistic head geometry. We present numerical results showing that the MEG forward problem is solved correctly with this formulation, and compare it with the performance of the traditional formulation. We conclude that the traditional formulation generally performs better, but still the new formulation is useful in certain situations.     

Automatic detection of pathological voices using complexity measures, noise parameters, and mel-cepstral coefficients

This paper proposes a new approach to improve the amount of information extracted from the speech aiming to increase the accuracy of a system developed for the automatic detection of pathological voices. The paper addresses the discrimination capabilities of 11 features extracted using nonlinear analysis of time series. Two of these features are based on conventional nonlinear statistics (largest Lyapunov exponent and correlation dimension), two are based on recurrence and fractal-scaling analysis, and the remaining are based on different estimations of the entropy. Moreover, this paper uses a strategy based on combining classifiers for fusing the nonlinear analysis with the information provided by classic parameterization approaches found in the literature (noise parameters and mel-frequency cepstral coefficients). The classification was carried out in two steps using, first, a generative and, later, a discriminative approach. Combining both classifiers, the best accuracy obtained is 98.23% ± 0.001.     

Prostaglandins suppress an outward potassium current in embryonic rat sensory neurons

One of the challenges in understanding ciliary and flagellar motility is determining the mechanisms that locally regulate dynein-driven microtubule sliding. Our recent studies demonstrated that microtubule sliding, in Chlamydomonas flagella, is regulated by phosphorylation. However, the regulatory proteins remain unknown. Here we identify the 138-kD intermediate chain of inner arm dynein I1 as the critical phosphoprotein required for regulation of motility. This conclusion is founded on the results of three different experimental approaches. First, genetic analysis and functional assays revealed that regulation of microtubule sliding, by phosphorylation, requires inner arm dynein I1. Second, in vitro phosphorylation indicated the 138-kD intermediate chain of I1 is the only phosphorylated subunit. Third, in vitro reconstitution demonstrated that phosphorylation and dephosphorylation of the 138-kD intermediate chain inhibits and restores wild-type microtubule sliding, respectively. We conclude that change in phosphorylation of the 138-kD intermediate chain of I1 regulates dynein-driven microtubule sliding. Moreover, based on these and other data, we predict that regulation of I1 activity is involved in modulation of flagellar waveform.     

Methodology to evaluate variations in piezoelectric constants after aging process

ABSTRACT

Piezoelectric ceramic properties change with time. Detected aging effects for PZT ceramics are; the difference in the value of the dielectric constants diminishes, whereas dielectric losses and elastic stiffness increases. In this work, an optimisation technique based on adjusting a finite element model to reproduce the complex impedance curves of a resonant piezoceramic disk is analysed aiming to detect changes due to aging. This technique allows estimating all material parameters, both their real and imaginary parts. The optimisation uses the constitutive equations of the piezoelectric effect in the linear regime. The evolution of elastic, piezoelectric and dielectric constants is evaluated after 5 years of aging. To compute the ten complex parameters, the piezoelectric model is adjusted to minimise the difference between finite element simulations and the experimental data. Results presented here, show that the proposed technique is sensitive enough to detect changes in the individual parameters due to aging process.     

Mechanical properties of freely suspended semiconducting graphene-like layers based on MoS2

We fabricate freely suspended nanosheets of molybdenum disulphide (MoS₂) which are characterized by quantitative optical microscopy and high-resolution friction force microscopy. We study the elastic deformation of freely suspended nanosheets of MoS₂ using an atomic force microscope. The Young''s modulus and the initial pre-tension of the nanosheets are determined by performing a nanoscopic version of a bending test experiment. MoS₂ sheets show high elasticity and an extremely high Young''s modulus (0.30 TPa, 50% larger than steel). These results make them a potential alternative to graphene in applications requiring flexible semiconductor materials.PACS, 73.61.Le, other inorganic semiconductors, 68.65.Ac, multilayers, 62.20.de, elastic moduli, 81.40.Jj, elasticity and anelasticity, stress-strain relations.     

Aromatic volatile organic compounds absorption with phenyl-based deep eutectic solvents: A molecular thermodynamics and dynamics study

The suitability of phenyl-based deep eutectic solvents (DESs) as absorbents for toluene absorption was investigated by means of thermodynamic modeling and molecular dynamics (MD). The thermodynamic models perturbed-chain statistical associating fluid theory (PC-SAFT) and conductor-like screening model for real solvents (COSMO-RS) were used to predict the vapor–liquid equilibrium of DES–toluene systems. PC-SAFT yielded quantitative results even without using any binary fitting parameters. Among the five DESs studied in this work, [TEBAC][PhOH] consisting of triethyl benzyl ammonium chloride (TEBAC) and phenol (PhOH), was considered as the most suitable absorbent. Systems with [TEBAC][PhOH] had lowest equilibrium pressures of the considered DES–toluene mixtures, the best thermodynamic characteristics (i.e., Henry's law constant, excess enthalpy, Gibbs free energy of solvation of toluene), and the highest self-diffusion coefficient of toluene. The molecular-level mechanism was explored by MD simulations, indicating that [TEBAC][PhOH] has the strongest interaction of DES–toluene compared to the other DESs under study. This work provides guidance to rationally design novel DESs for efficient aromatic volatile organic compounds absorption.     

Some aspects of the electrochemistry of the flotation of pyrrhotite

The iron sulfide mineral, pyrrhotite (Fe_(1–x)S), has long been known to be more difficult to recover by flotation from alkaline slurries than many other base metal sulfide minerals. This paper summarizes the results of an electrochemical study of the surface reactions that occur during the flotation of nickeliferous pyrrhotite in the recovery of nickel and the platinum group metals. Mixed potential measurements conducted with natural pyrrhotite electrodes in various stages of an operating flotation plant showed that the mineral potential is positive to the equilibrium potential of the xanthate/dixanthogen couple. Similar results were obtained during batch flotation experiments and in synthetic solutions in the laboratory. Cyclic voltammetric and potentiostatic current/time transient experiments were used to investigate the oxidation of pyrrhotite under various conditions. In addition, the reduction of oxygen, the reaction of copper ions and the oxidation of xanthate ions at the mineral surface were investigated. The formation of dixanthogen on pyrrhotite surfaces is thermodynamically favourable in plant flotation slurries. However the interaction with xanthate at pH values above 7 is inhibited by a surface species formed during the conditioning prior to xanthate addition. In acidic solutions copper ions react readily with pyrrhotite to form a species, possibly CuS that can be oxidized at potentials above 0.4 V. At pH 9 this species does not form and there is no electrochemical reaction between pyrrhotite and copper ions. The beneficial effects of copper ions to flotation performance appear to be related to an enhancement of the oxidation of xanthate.     

CFD as an approach to understand flammable dust 20 L standard test: Effect of the ignition time on the fluid flow

A computational study based on the Euler–Lagrange approach was developed for the characterization of flammable dusts in the 20 L sphere standard test. The aim of the study was to analyze some parameters that might affect the experimental data (e.g., cold turbulence and particle size). The turbulence of a wheat starch cloud was described with the Detached Eddy Simulation model. Both the pressure of the system and the RMS velocity were compared with the flow patterns established with a particle image velocimetry analysis. It was concluded that the rebound nozzle forms a cloud that is composed by clumps. This fact implies dissimilarities between the local concentrations and the nominal value. Finally, a granulometric analysis established that the mean diameter of the particle size distribution (PSD) decreased by 69% during the dispersion. Thus, it is suggested to consider the PSD at the ignition zone rather than the PSD of the sample. © 2017 American Institute of Chemical Engineers AIChE J, 63: 42–54, 2018     

Electrically insulating polymeric nanocomposites with enhanced thermal conductivity by visible‐light curing of epoxy–boron nitride nanotube formulations

Epoxy–boron nitride nanotube (BNNT) composites were prepared using visible light through a radical‐induced cationic polymerization method activated by camphorquinone. The fully cured films showed an enhancement of glass transition temperature in the presence of the filler. Electrical characterization showed a slight dielectric constant decrease with BNNT content. Finally, thermal conductivity measured using nano‐flash analysis showed a linear increase in the thermal conductivity of the materials with increasing BNNT content in the photocurable formulations. © 2017 Society of Chemical Industry