Energy Harvesting System Design and Optimization Using High Bandwidth Rectenna for Wireless Sensor Networks

Wireless Personal Communications - Today’s world has a keen interest in systems which are battery-less and can harvest energy from their surroundings. There is an increased demand for...     

Development of LTCC micro-hotplate with PTC temperature sensor for gas-sensing applications

Low temperature co-fired ceramic (LTCC) micro-hotplates show wide applications in gas sensors and micro-fluidic devices. It is easily structured in three-dimensional structures. This paper presents the low power consumption micro-hotplates which were developed with PTC (positive temperature coefficient) temperature sensor and inter-digitated electrodes. The paper presents two different structures for micro-hotplate with platinum as a heating element. The PTC temperature sensor using two different materials viz. PdAg and platinum paste are developed with micro-hotplates. The simulation has been achieved through COMSOL for LTCC and alumina micro-hotplates. The temperature variation with power consumption has been measured for the developed LTCC micro-hotplates. The change in resistance of PTC temperature sensors was measured with micro-hotplate temperature. The aim of this study was to place a temperature sensor with the gas sensor module to measure and control the temperature of micro-hotplate. A SnO₂ sensing layer is coated on LTCC micro-hotplate using screen printing and characterized for the sensing of carbon monoxide gas (CO). This study will be beneficial for designing hotplates based on LTCC technology with low power consumption and better stability of temperature for gas-sensing applications.     

Melt intercalation/exfoliation of polystyrene-sodium-montmorillonite nanocomposites using sulfonated polystyrene ionomer compatibilizers

Quaternary ammonium salts of sulfonated polystyrene (SPS) were used as compatibilizers for melt intercalation of PS and pristine Na-montmorillonite. Tetra-octyl ammonium SPS and tetra-decyl ammonium SPS ionomeric compatibilizers produced significant exfoliation and a homogeneous dispersion of the polymer-clay nanocomposites. Wide angle X-ray diffraction and transmission electron microscopy were primarily used to characterize the morphology of the nanocomposites. Image analysis was used to measure the percentage exfoliation. Exfoliation increased with the increasing length of the alkyl chain of the ammonium counter-ion of the SPS ionomer. The nanocomposites containing ionomers exhibited higher storage moduli compared to nanocomposites without the compatibilizer.     

Esterification of acrylic acid with methanol by reactive chromatography: Experiments and simulations

The esterification of acrylic acid with methanol using Amberlyst 15 as a stationary phase has been investigated using a chromatographic reactor. Several experimental runs at various operating conditions have been conducted on a batch column. A classical reactive chromatography model including lumped kinetics, a linear driving force transport model and a heterogeneous kinetic model for the catalytic reaction has been developed. The additional dispersion of concentration fronts due to density gradient effects has been accounted for in the model. The model parameters have been determined in a fast and reliable way by directly fitting the batch column experiments. In general, a good agreement between experimental and calculated results is obtained. The evaluation of the covariance of the fitted model parameters reveals important insights about the system behavior.Based on the detailed batch column model, a complete model of a simulated-moving-bed reactor has been implemented and its optimal point of operation for the synthesis of methyl acrylate from acrylic acid has been determined. Particularly when considering the low-operating temperature, we can regard this process as a possible competition for current technologies.     

The effect of feedstock and process conditions on the synthesis of high purity CNTs from aromatic hydrocarbons

High purity multi-walled carbon nanotubes were synthesized from aromatic hydrocarbons (benzene, toluene, xylene and trimethyl benzene) using ferrocene as the source of Fe catalyst. Screening studies of aromatic feeds at 675 °C, residence time of 14 s and Fe/C atom ratio of 1.07%, resulted in feedstock carbon conversion of 20-31%, CNT yield of 19.8-30.5%, and catalyst yield of 5.3-8.3 (g CNT/g catalyst). While the quality of the CNTs as determined by TGA, SEM, TEM and Raman spectroscopy, were high and comparable for different feedstocks; their carbon conversion, CNT yield and catalyst yield differed noticeably. A process optimization study for toluene feed showed that carbon conversion of more than 39%, CNT yield of 38.7% and catalyst yield of 18.3 can be achieved at temperature of 800 °C, Fe/C atom ratio of 0.47%, and residence time of 10-20 s.     

Using aspects for testing of embedded software: experiences from two industrial case studies

Aspect-oriented software testing is emerging as an important alternative to conventional procedural and object-oriented testing techniques. This paper reports experiences from two case studies where aspects were used for the testing of embedded software in the context of an industrial application. In the first study, we used code-level aspects for testing non-functional properties. The methodology we used for deriving test aspect code was based on translating high-level requirements into test objectives, which were then implemented using test aspects in AspectC++. In the second study, we used high-level visual scenario-based models for the test specification, test generation, and aspect-based test execution. To specify scenario-based tests, we used a UML2-compliant variant of live sequence charts. To automatically generate test code from the models, a modified version of the S2A Compiler, outputting AspectC++ code, was used. Finally, to examine the results of the tests, we used the Tracer, a prototype tool for model-based trace visualization and exploration. The results of the two case studies show that aspects offer benefits over conventional techniques in the context of testing embedded software; these benefits are discussed in detail. Finally, towards the end of the paper, we also discuss the lessons learned, including the technological and other barriers to the future successful use of aspects in the testing of embedded software in industry.     

Hydrogen Yield from Low Temperature Steam Reforming of Ethanol

Low temperature steam reforming of ethanol in the temperature range of 200–360°C was studied to maximize the production of H₂. The optimum reaction conditions in presence of a suitable catalyst can produce mainly the desired products H₂ and CO₂. Cu/Al₂O₃ catalysts with six different concentrations ranging from 0 to 10 wt.% Mn, were prepared, characterized and studied for the ethanol-steam reforming reaction. Maximum ethanol conversion of 60.7% and hydrogen yield of 3.74 (mol H₂ / mol ethanol converted) were observed at 360°C for catalyst with 2.5 wt.% Mn loading.     

Polydimethylsiloxane based polyurethane and its composite with layered double hydroxide: Synthesis and its thermal properties

This investigation reports the synthesis of a new class of polyurethane (PU) based on bis(hydroxyalkyl) polydimethylsiloxane (PDMS) as diol and isophorone diisocyanate as diisocyanate followed by the preparation of PU/layered double hydroxide (PU/LDH) nanocomposite via ex-situ technique. Nuclear magnetic resonance and Fourier-transform infrared spectroscopy studies confirm the formation of PU and incorporation of PDMS into the PU backbone. Thermogravimetry analysis revealed that thermal stability of the composite improves significantly with incorporation of LDH into the PU matrix. This may be accredited to the barrier effect rendered by the LDH layers. Differential scanning calorimetry study reveals that with the incorporation of LDH, glass transition temperature (T_g) of the composite increases for an optimum level of loading beyond which it remains constant.