Energy Harvesting System Design and Optimization Using High Bandwidth Rectenna for Wireless Sensor Networks

Wireless Personal Communications - Today’s world has a keen interest in systems which are battery-less and can harvest energy from their surroundings. There is an increased demand for...     

Development of LTCC micro-hotplate with PTC temperature sensor for gas-sensing applications

Low temperature co-fired ceramic (LTCC) micro-hotplates show wide applications in gas sensors and micro-fluidic devices. It is easily structured in three-dimensional structures. This paper presents the low power consumption micro-hotplates which were developed with PTC (positive temperature coefficient) temperature sensor and inter-digitated electrodes. The paper presents two different structures for micro-hotplate with platinum as a heating element. The PTC temperature sensor using two different materials viz. PdAg and platinum paste are developed with micro-hotplates. The simulation has been achieved through COMSOL for LTCC and alumina micro-hotplates. The temperature variation with power consumption has been measured for the developed LTCC micro-hotplates. The change in resistance of PTC temperature sensors was measured with micro-hotplate temperature. The aim of this study was to place a temperature sensor with the gas sensor module to measure and control the temperature of micro-hotplate. A SnO₂ sensing layer is coated on LTCC micro-hotplate using screen printing and characterized for the sensing of carbon monoxide gas (CO). This study will be beneficial for designing hotplates based on LTCC technology with low power consumption and better stability of temperature for gas-sensing applications.     

IMPACCT: Methodology and Tools for Power-Aware Embedded Systems

Power-aware systems are those that must exploit a widerange of power/performance trade-offs in order to adapt to the power availabilityand application requirements. They require the integration of many novel powermanagement techniques, ranging from voltage scaling to subsystem shutdown.However, those techniques do not always compose synergistically with eachother; in fact, they can combine subtractively and often yield counterintuitive,and sometimes incorrect, results in the context of a complete system. Thiscan become a serious problem as more of these power aware systems are beingdeployed in mission critical applications.To address the problem of technique integration for power-aware embedded systems, we propose a new design tool framework called IMPACCT and the associated design methodology. The system modeling methodology includes application model for capturing timing/powerconstraints and mode dependencies at the system level. The tool performs power-awarescheduling and mode selection to ensure that all timing/power constraintsare satisfied and that all overhead is taken into account. IMPACCT then synthesizesthe implementation targeting a symmetric multiprocessor platform. Experimentalresults show that the increased dynamic range of power/performance settingsenabled a Mars rover to achieve significant acceleration while using lessenergy. More importantly, our tool correctly combines the state-of-the-arttechniques at the system level, thereby saving even experienced designersfrom many pitfalls of system-level power management.     

The effect of mischmetal addition on the structure and mechanical properties of a cast Al-7Si-0.3Mg alloy containing excess iron (up to 0.6 Pct)

The effect of Fe content (0.2 to 0.6 pct) on the microstructure and mechanical properties of a cast Al-7Si-0.3Mg (LM 25/356) alloy has been investigated. Further, 1 pct mischmetal (MM) additions (a mixture of rare-earth (RE) elements) were made to these alloys, and their mechanical properties at room and at elevated temperatures (up to 200 °C) were evaluated. A structure-property correlation on this alloy was attempted using optical microstructure analysis, fractographs, X-ray diffraction, energy-dispersive analysis of X-rays (EDX), and quantitative metallography by image analysis. An increase in Fe content increased the volume percentage of Fe-bearing intermetallic compounds (β and π phases), contributing to the loweryield strength (YS), ultimate tensile strength (UTS), percentage elongation, and higher hardness. An addition of 1 pct MM to the alloys containing 0.2 and 0.6 pct Fe was found to refine the microstructure; modify the eutectic silicon and La, Ce, and Nd present in the MM; form different intermetallic compounds with Al, Si, Fe, and Mg; and improve the mechanical properties of the alloys both at room and elevated temperatures.     

Pedestrian detection and tracking at crossroads

This paper presents a system that can perform pedestrian detection and tracking using vision-based techniques. A very important issue in the field of intelligent transportation system is to prevent pedestrians from being hit by vehicles. Recently, a great number of vision-based techniques have been proposed for this purpose. In this paper, we propose a vision-based method, which combines the use of a pedestrian model as well as the walking rhythm of pedestrians to detect and track walking pedestrians. Through integrating some spatial and temporal information grabbed by a vision system, we are able to develop a reliable system that can be used to prevent traffic accidents happened at crossroads. In addition, the proposed system can deal with the occlusion problem. Experimental results obtained by executing some real world cases have demonstrated that the proposed system is indeed superb.     

The investigation of 32P wire for catheter-based endovascular irradiation

The dose distribution from a 32P source has been measured and calculated in order to evaluate its application in endovascular irradiation. The source dimension was 27 mm in length and 0.3 mm in diameter and was embedded in the end of a Ni-Ti wire. Dose measurements were performed using radiochromic film in several specially designed tissue equivalent phantoms. Loevinger's point dose kernel was used for the calculation. The approximate dose rate at a radial distance of 1.5 mm from the center of the source was found to be 6.75 cGy/s per GBq (0.25 cGy/s per mCi), which allows the delivery of a therapeutic dose in a short time interval with a satisfactory homogeneity without stepping the source. However, the dose rate falls off almost exponentially along the radial distance. Therefore it may not be suitable for treating large diameter vessel from a centrally located source. The effect of a curved 32P wire source on the radial dose distribution was also investigated. The results showed that for a maximum bend of 180 degrees the dose rate was increased by as much as 20% along the inner radial distance but decreased by as much as 20% along the outer radial distance compared to the dose along a straight wire. However, for curvatures normally encountered in a clinical situation, the dose rate was changed less than 5%.     

Challenges in computer architecture evaluation

We focus on problems suited to the current evaluation infrastructure. The current limitation and trends in evaluation techniques are troublesome and could noticeably slow the rate of computer system innovation. New research has been recommended to help and make quantitative evaluations of computer systems manageable. We support research in the areas of simulation frameworks, benchmarking methodologies, analytic methods, and validation techniques.     

Melt intercalation/exfoliation of polystyrene-sodium-montmorillonite nanocomposites using sulfonated polystyrene ionomer compatibilizers

Quaternary ammonium salts of sulfonated polystyrene (SPS) were used as compatibilizers for melt intercalation of PS and pristine Na-montmorillonite. Tetra-octyl ammonium SPS and tetra-decyl ammonium SPS ionomeric compatibilizers produced significant exfoliation and a homogeneous dispersion of the polymer-clay nanocomposites. Wide angle X-ray diffraction and transmission electron microscopy were primarily used to characterize the morphology of the nanocomposites. Image analysis was used to measure the percentage exfoliation. Exfoliation increased with the increasing length of the alkyl chain of the ammonium counter-ion of the SPS ionomer. The nanocomposites containing ionomers exhibited higher storage moduli compared to nanocomposites without the compatibilizer.