Development of LTCC micro-hotplate with PTC temperature sensor for gas-sensing applications

Low temperature co-fired ceramic (LTCC) micro-hotplates show wide applications in gas sensors and micro-fluidic devices. It is easily structured in three-dimensional structures. This paper presents the low power consumption micro-hotplates which were developed with PTC (positive temperature coefficient) temperature sensor and inter-digitated electrodes. The paper presents two different structures for micro-hotplate with platinum as a heating element. The PTC temperature sensor using two different materials viz. PdAg and platinum paste are developed with micro-hotplates. The simulation has been achieved through COMSOL for LTCC and alumina micro-hotplates. The temperature variation with power consumption has been measured for the developed LTCC micro-hotplates. The change in resistance of PTC temperature sensors was measured with micro-hotplate temperature. The aim of this study was to place a temperature sensor with the gas sensor module to measure and control the temperature of micro-hotplate. A SnO₂ sensing layer is coated on LTCC micro-hotplate using screen printing and characterized for the sensing of carbon monoxide gas (CO). This study will be beneficial for designing hotplates based on LTCC technology with low power consumption and better stability of temperature for gas-sensing applications.     

Adaptive Spatial Partitioning for Multidimensional Data Streams

We propose a space-efficient scheme for summarizing multidimensional data streams. Our sketch can be used to solve spatial versions of several classical data stream queries efficiently. For instance, we can track ε-hot spots, which are congruent boxes containing at least an ε fraction of the stream, and maintain hierarchical heavy hitters in d dimensions. Our sketch can also be viewed as a multidimensional generalization of the ε-approximate quantile summary. The space complexity of our scheme is O((1/ε) log R) if the points lie in the domain [0, R]^d, where d is assumed to be a constant. The scheme extends to the sliding window model with a log (ε n) factor increase in space, where n is the size of the sliding window. Our sketch can also be used to answer ε-approximate rectangular range queries over a stream of d-dimensional points.     

An efficient TDMA start-up and restart synchronization approach for distributed embedded systems

A desired attribute in safety-critical embedded real-time systems is a system time and event synchronization capability on which predictable communication can be established. Focusing on bus-based communication protocols, we present a novel, efficient, and low-cost start-up and restart synchronization approach for TDMA environments. This approach utilizes information about a node's message length that forms a unique sequence to achieve synchronization such that communication overhead can be avoided. We present a fault-tolerant initial synchronization protocol with a bounded start-up time. The protocol avoids start-up collisions by deterministically postponing retries after a collision. We also present a resynchronization strategy that incorporates recovering nodes into synchronization.     

Defect-free sintering of two material powder injection molded components Part II Model

A defect-free, two-material component can be obtained via co-sintering by suitably altering the powder characteristics or compositions, as demonstrated in Part I. In this paper, a model to ascertain the suitability of material systems to be co-sintered without defects such as delamination or interface pores is presented. The model is based on the management of the stress induced due to the difference in shrinkage and an analysis of the in situ strength of the weaker material during sintering. Tool steel in combination with stainless steel admixed with boron and Fe-2Ni admixed with boron are two systems used to validate the model. The predictions of the model are in good agreement with the observations.     

Hexagonal (superlattice) form of Ga2Te3

Gallium telluride (Ga₂Te₃) was synthesized at different temperatures (850 to 460° C) using different cooling rates. Materials synthesized at higher temperatures (including quenched materials from the melt) always yielded zinc-blende lattice with well resolved _{1 2} doublet X-ray powder diffraction lines. In the material synthesized at lower temperature ( 460°C), we obtained additional (superlattice) lines as reported by Newman and Cundall [4]. It was possible to index these reflections not only on an orthorhombic unit cell (a=0.417, b=2.360, c=1.252 nm) but also on cubic (a=1.7678 nm) and hexagonal (a=0.832, c=3.065 nm) unit cells. To us, the hexagonal cell appears to be more realistic. If sufficient time is given to reach equilibrium, the whole of the zinc-blende form of Ga₂Te₃ is transformed to the hexagonal form. It has been further observed that conversion of the hexagonal into the cubic form and vice versa can be brought about by heating the material at temperatures greater or less than 460° C, respectively. Lastly, the zinc-blende phase of Ga₂Te₃ is metastable and slowly transforms to hexagonal form at room temperature.     

Electron transport in highly compensated,plastically bent,n-type InSb in the temperature range 4.2–300 K

Measurements of the Hall coefficient, dc electrical conductivity, and magnetoresistance have been made on two highly compensated, plastically bent,n-type InSb samples from liquid helium to room temperature. The number and Hall mobility of charge carriers and the electrical conductivity are greatly affected by plastic bending. The mobility decreases appreciably and the number of charge carriers increases in both the deformed samples. This increase of effective charge carriers can be attributed to the introduction of effective donor centers due to plastic bending. The electrical conductivity in one of the deformed samples increases between the temperature ranges 4.2–15 K and 125–190 K compared to that of the undeformed state of the sample. This unusual increase in is attributed to the large increase inn value. The magnetoresistance at 4.2 K is due to impurity-band conduction and is found to be positive. It shows approximately a linear variation with magnetic field in both the deformed samples. The observed behavior of the magnetoresistance at 300 K is consistent with the behavior expected for free electrons. The observed / at 77.4 K is found to be less than that at 300 K and is explained in terms of the Hall mobility values at these two temperatures.     

Memory leak detection in Plumbr

Platforms with automatic memory management, such as the JVM, are usually considered free of memory leaks. However, memory leaks can happen in such environments, as the garbage collector cannot free objects, which are not used by the application anymore, but are still referenced. Such unused objects can eventually fill up the heap and crash the application. Although this problem has been studied extensively, nevertheless, there are still many rooms for improvement in this area. This paper describes the statistical approach for memory leak detection, as an alternative, along with a commercial tool, Plumbr, which is based on the method. The tool is later analyzed with three case studies of real applications and in the process also analyzes strengths and weaknesses of the statistical approach for memory leak detection. Copyright © 2014 John Wiley & Sons, Ltd.     

Biosynthesis of zinc oxide nanoparticles by petals extract of Rosa indica L., its formulation as nail paint and evaluation of antifungal activity against fungi causing onychomycosis

Aim: The authors report the biological synthesis of zinc oxide nanoparticles (ZnO‐NPs) from the petals extract of Rosa indica L. (rose). Its efficacy was evaluated against two dermatophytes: namely: Trichophyton mentagrophytes and Microsporum canis which cause onychomycosis. The activity of antibiotics against the tested dermatophytes was enhanced, when evaluated in combination with ZnO‐NPs. Methods and results: The synthesised ZnO‐NPs were preliminary detected by using ultraviolet UV visible spectroscopy, which showed specific absorbance. The ZnO‐NPs were further characterised by nanoparticle tracking analysis (NTA), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), X‐ray diffraction and Zetasizer. Moreover, nanoparticles containing nail paint (nanopaint) was formulated and its antifungal activity was also assessed against T. mentagrophytes and M. canis. ZnO‐NPs and formulated nanopaint containing ZnO‐NPs, both showed significant antifungal activity. The maximum activity was noted against M. canis and lesser against T. mentagrophytes. Minimum inhibitory concentration of ZnO‐NPs was also determined against the dermatophytes causing onychomycosis infection. Conclusion: ZnO‐NPs can be utilised as a potential antifungal agent for the treatment of onychomycosis after more experimental trials.Inspec keywords: diseases, zinc compounds, nanoparticles, nanofabrication, antibacterial activity, microorganisms, nanomedicine, ultraviolet spectra, visible spectra, Fourier transform infrared spectra, transmission electron microscopy, X‐ray diffraction, biomedical materials, patient treatmentOther keywords: zinc oxide nanoparticle biosynthesis, Rosa indica L petals extract, nail paint, antifungal activity evaluation, dermatophyte, Trichophyton mentagrophytes, Microsporum canis, antibiotics activity, ultraviolet‐visible spectroscopy, nanoparticle tracking analysis, Fourier transform infrared spectroscopy, transmission electron microscopy, X‐ray diffraction, zetasizer, antifungal agent, onychomycosis treatment     

Compressing Two-Dimensional Routing Tables

We consider an algorithmic problem that arises in the context of routing tables used by Internet routers. The Internet addressing scheme is hierarchical, where a group of hosts are identified by a prefix that is common to all the hosts in that group. Each host machine has a unique 32-bit address. Thus, all traffic between a source group s and a destination group d can be routed along a particular route c by maintaining a routing entry (s, d, c) at all intermediate routers, where s and d are binary bit strings. Many different routing tables can achieve the same routing behavior. In this paper we show how to compute the most compact routing table. In particular, we consider the following optimization problem: given a routing table D with N entries of the form (s, d, c) , determine a conflict-free routing table with fewest entries that has the same routing behavior as D. If the source and destination fields have up to w bits, and there are at most K different route values, then our algorithm runs in worst-case time O( NK w2) .