10-Gb/s error-free transmission under optical reflection using isolator-free 1.3- /spl mu/m InP-based vertical-cavity surface-emitting lasers

Error-free transmission through 10-km single-mode fiber at 10 Gb/s under -13-dB optical reflections has been demonstrated for the first time using a directly modulated 1.3-/spl mu/m InP-based VCSEL without any optical isolator. The 13-GHz relaxation oscillation frequency and stable polarization suppresses relative intensity noise degradation under optical reflection. Only 1-dB error-free power penalty has been observed with optical reflection set with the worst polarization direction.     

Preparation of pyrochlores. A1−xHxTaO3·nH2O (A=Na,K)

Pyrochlores of A_1?xH_xTaO₃·nH₂O (A=Na,K) were prepared under the hydrothermal conditions. The values of x for these compounds were increased from 0.3 to 0.5 for A=Na and from 0.2 to 0.5 for A=K by treatment with the distilled water. The compounds with x<0.5 were decomposed to a mixture of NaTaO₃ and Na₂Ta₄O₁₁ for A=Na, or to a mixture of KTaO₃ and a tetragonal tungsten bronze phase, and those with x=0.5 to a single phase of A₂Ta₄O₁₁ at elevated temperatures. Below the decomposition temperatures, defect pyrochlores with oxygen vacancies, $\text{A}{}_{\mathrm{<mtext>1?</mtext><mtext>x</mtext>}}\text{TaO}{}_{\mathrm{<mtext>3?</mtext><mtext>x</mtext><mtext>2</mtext>}}$, were produced. They were hygroscopic, and in the case of A=K and x=0.5 the original phase was recovered by leaving in air for several hours.     

Mechanical properties of sinter-forged Al2O3-ZrO2 ceramics

Two kinds of composites, Al₂O₃-25 wt% ZrO₂(2 mol% Y₂O₃) (Y-ZTA), Al₂O₃-25 wt% ZrO₂(8 mol% CeO₂) (Ce-ZTA) were produced by the sinter-forging process. The effect of presintering temperature on the mechanical properties of the composites was examined. The sinter-forging process increased the room-temperature bending strength in comparison with pressureless sintering, owing to the smaller grain size in sinter-forged bodies than in pressureless sintered ones. It was found necessary to keep the presintering temperature considerably lower than sinter-forging temperature in order to improve the room-temperature strength. The strength of sinter-forged Ce-ZTA was higher than that of sinter-forged Y-ZTA. The residual surface compressive stress induced by the phase transition during grinding in Ce-ZTA was found to be effective to further improve the strength and fracture toughness.     

Analysis of the IgE-epitope of Der f 2, a major mite allergen, by in vitro mutagenesis

Der f 2 is a major mite allergen composed of 129 amino acid residues. To determine the major epitopes on Der f 2 recognized by human IgE antibodies, artificial mutations were introduced to Der f 2 protein. The IgE-binding activity of Der f 2 was significantly decreased by deletion of 10 amino acids at the N-terminus or nine amino acids at the C-terminus. Site-directed mutagenesis with a single amino acid replacement by Ala or Leu in both N- and C-terminal regions as well as a central portion was performed to generate 42 single-site mutations. Amino acid replacement around a disulfide bond of Cys8-Cys119 caused a marked decrease in IgE-binding activity. Furthermore, a distinct decrease in IgE-binding was also caused by Ala-substitution close to a disulfide bond of Cys73-Cys78 and by mutations of a few charged residues. From these results, it was concluded that the two disulfide-forming regions of Der f 2 and several charged residues are important for forming major epitope structures recognized by human IgE antibodies.     

Cooperative behavior of various agents in dynamic environment

The multi-agent model is a model in which agents with limited ability cooperate each other to accomplish a goal. In this paper, we introduce a multi-agent model in which agents are created to imitate real ants. There are two different type of agents, each type of which has a particular task. We designed agents to communicate each other by using pheromone considering noise. On this model, we observed cooperative behavior of agents and evaluated conditions to make an order of behavior in the model.     

A comparison of the grade of laryngeal visualisation;--the McCoy compared with the Macintosh and the Miller blade in adults

Effectiveness in visualization of the vocal cord during orotracheal intubation with McCoy (McC) compared with Macintosh (Min) and Miller (Mil) blades were investigated. After an institutional review board approval, 117 patients for elective surgery under general anesthesia requiring tracheal intubation were investigated. Five board certified anesthesiologists tried to visualize the vocal cord of a patient three times with the three different types of laryngoscope. Total of 351 intubation attempts were studied. The view obtained at laryngoscopy with each of the three blades was recorded as follows. Grade 1. If most of the glottis is visible. Grade 2. If only the posterior extremity of the glottis is visible. Grade 3. If no part of the glottis can be seen. Grade 4. If not even the epiglottis can be exposed. Eight-two Grade 1 views were obtained with McC, 72 with Mil and 47 with Min, respectively. Thirty-three Grade 2 views were obtained with McC, 36 with Min and 24 with Mil. Two Grade 3 views with McC, 34 with Min and 14 with Mil were obtained. Seven Grade 4 views were obtained with Mil. The grades of laryngeal visualization with McC were significantly lower than those with Min and Mil.     

Ion exchange of intercalation compounds from WOP2O7 and intercalation ofn-alkylamines

Ion exchange of Na _x WOP₂O₇ ·nH₂O (x 1.4) prepared from WOP₂O₇ was attempted, using alkaline and alkaline earth ions. The degree of exchange was observed to be >50% at 90° C except for Mg²⁺. The basal spacing of ion-exchanged materials for the hydrated phase were dependent on the number of water molecules in the interlayer spaces, while those for the dehydrated phase increased with the size of ions in the interlayer spaces. The network of water molecules linked by the hydrogen bond in the interlayer spaces seems to determine the basal spacing. By the ion-exchange reaction,n-alkylammonium ions were intercalated into the interlayer spaces of Na _x WOP₂O₇ ·nH₂O (x 1.4) and Sn _x H _y WOP₂O₇ ·nH₂O (2x +y 0.5). In spite of the difference in the charge density of the host layer, a similar arrangement of alkyl chains in the interlayer spaces resulted, and neutral amines were considered to be intercalated as well as ammonium ions. Direct reaction ofn-alkylamine with WOP₂O₇ produced an intercalation compound without reduction of tungsten. The arrangement of the amines in the interlayer spaces is similar to that supposed to the ion-exchanged derivatives when heated at 140° Cin vacuo.     

New catalytic functions of Pd–Zn, Pd–Ga, Pd–In, Pt–Zn, Pt–Ga and Pt–In alloys in the conversions of methanol

Pd and Pt supported on ZnO, Ga₂O₃ and In₂O₃ exhibit high catalytic performance for the steam reforming of methanol, CH₃OH+H₂OCO₂+3HH₂, and the dehydrogenation of methanol to HCOOCH₃, 2CH₃OHHCOOCH₃+2HH₂. Combined results with temperature-programmed reduction (TPR) and XRD method revealed that Pd–Zn, Pd–Ga, Pd–In, Pt–Zn, Pt–Ga and Pt–In alloys were produced upon reduction. Over the catalysts having the alloy phase, the reactions proceeded selectively, whereas the catalysts having metallic phase exhibited poor selectivities.