A stochastic model for localized disturbances and its applications

A stochastic model for local disturbances, particularly for a temporal harmonic with random modulations in amplitude and/or phase, is proposed in this paper. Results for the second moment responses of a linear single-degree-of-freedom system to this type of stochastic loading demonstrate a significant change in response characteristics due to a small uncertainty. A local phenomenon may last much longer and resonance may be smeared to a broad range. Integrated with wavelet transform, the proposed approach may be used to model a random process with non-stationary frequency content. Especially, it can be effectively used for Monte Carlo simulation to generate large size of samples that have similar characteristics in time and frequency domains as a pre-selected mother sample has. The technique has a great potential for the case where uncertainty study is warranted but the available samples are limited.     

A risk approach to the management of boiler tube thinning

A large set of industrial thickness inspection data covering four boiler units of a power station over a period of five years was made available to the authors. The measurements were made in regions of the boiler where corrosion/erosion was the major cause of failure of the boiler tubes. There were over 40,000 separately measured data points in the data and all were collected with some care and expense.In the development of maintenance strategies for equipment, this type of data is typical of the data that must be collected and assessed. This data thus represents an opportunity to evaluate the ability to generate a useful risk approach to the management of the tubing.An important example of a risk-based approach is the American Petroleum Institute (API) Risk Based Inspection (“RBI”), API 581. A variety of problems were encountered applying this to boiler tubes. The problems include irrelevant API 581 corrosion rate tables, lack of information on how to analyse inspection data, difficulty of dealing with multiple inspection categories and lack of suitable direction for programming inspection intervals.     

Proactive task migration with a self-adjusting migration threshold for dynamic thermal management of multi-core processors

Request for more computation power steadily forces designers to provide more powerful processors using more number of cores on a single chip. The increasing complexity of processors leads to higher integration density, power density, and temperature. For avoiding thermal emergencies, various dynamic thermal management techniques have been presented. In this paper, we present a novel online self-adjusting temperature threshold schema for dynamic thermal management to minimize both average and peak temperature with very low performance overhead. Our proposed algorithm adjusts migration threshold according to workload and hardware platforms. The experimental results indicate that our technique can significantly decrease the average and peak temperature compared to Linux standard scheduler, and two well-known thermal management techniques: PDTM and TAS.     

An architecture framework for an adaptive extensible processor

To improve the performance of embedded processors, an effective technique is collapsing critical computation subgraphs as application-specific instruction set extensions and executing them on custom functional units. The problem with this approach is the immense cost and the long times required to design a new processor for each application. As a solution to this issue, we propose an adaptive extensible processor in which custom instructions (CIs) are generated and added after chip-fabrication. To support this feature, custom functional units are replaced by a reconfigurable matrix of functional units (FUs). A systematic quantitative approach is used for determining the appropriate structure of the reconfigurable functional unit (RFU). We also introduce an integrated framework for generating mappable CIs on the RFU. Using this architecture, performance is improved by up to 1.33, with an average improvement of 1.16, compared to a 4-issue in-order RISC processor. By partitioning the configuration memory, detecting similar/subset CIs and merging small CIs, the size of the configuration memory is reduced by 40%.     

Plasma Enhanced Lithium Coupled with Cobalt Fibers Arrays for Advanced Energy Storage

Construction of high efficiency and stable Li metal anodes is extremely vital to the breakthrough of Li metal batteries. In this study, for the first time, groundbreaking in situ plasma interphase engineering is reported to construct high-quality lithium halides-dominated solid electrolyte interphase layer on Li metal to stabilize & protect the anode. Typically, SF₆ plasma-induced sulfured and fluorinated interphase (SFI) is composed of LiF and Li₂S, interwoven with each other to form a consecutive solid electrolyte interphase. Simultaneously, brand-new vertical Co fibers (diameter: ≈5 µm) scaffold is designed via a facile magnetic-field-assisted hydrothermal method to collaborate with plasma-enhanced Li metal anodes (SFI@Li/Co). The Co fibers scaffold accommodates active Li with mechanical integrity and decreases local current density with good lithiophilicity and low geometric tortuosity, supported by DFT calculations and COMSOL Multiphysics simulation. Consequently, the assembled symmetric cells with SFI@Li/Co anodes exhibit superior stability over 525 h with a small voltage hysteresis (125 mV at 5 mA cm⁻²) and improved Coulombic efficiency (99.7%), much better than the counterparts. Enhanced electrochemical performance is also demonstrated in full cells with commercial cathodes and SFI@Li/Co anode. The research offers a new route to develop advanced alkali metal anodes for energy storage.     

Utilizing settling tests to design a conventional upflow settling tank modified with inclined plates

This paper examines the relationships between the turbidity removal efficiency (TRE), the surface overflow rate (SOR), and the detention time (D(t)) in settling column and jar tests, as well as the performance of a conventional upflow settling tank modified with inclined plates in the upper zone. The experimental results showed that the SOR obtained from the flocculent settling column test can be increased by 30% and the corresponding D(t) can be decreased by 75% with a variation in TRE of less than 7%. The TRE of flocculent settling in the jar test coincided with the performance of the modified upflow settling tank, while the results of the settling column test were slightly different. For plain settling, the SOR obtained from jar and settling column tests should be divided by 3 and 2, respectively, before possible use in the design of the modified upflow settling tank. Two empirical models with 1.0% error in the TRE predictions were developed to facilitate the design of the modified upflow settling tank.     

Two-phase flow component fraction measurement using gamma-ray attenuation technique

Multiphase flow meters as the potential alternatives to separation and metering techniques have been in rapid development since 1980 s.Before its field operation,the instrument should be calibrated in a standard test-facility.In spite of the known medium and large scale facilities all over the world,we developed a laboratory scale instrument for component fraction measurements.It has a two-phase flow homogenizer loop with the clamp-on potential of the meters to provide a regime independent measurement.It is capable of delivering a complete homogenization by γ-ray densitometer.With an error of±5%in component fraction measurements,this instrument is appropriate for testing and calibrating other meters.     

Significant Enhancement of the Dielectric Constant through the Doping of CeO2 into HfO2 by Atomic Layer Deposition

Films of CeO₂ were deposited by atomic layer deposition (ALD) using a Ce(mmp)₄ [mmp = 1‐methoxy‐2‐methyl‐2‐propanolate] precursor and H₂O reactant. The growth characteristics and film properties of ALD CeO₂ were investigated. The ALD CeO₂ process produced highly pure, stoichiometric films with polycrystalline cubic phases. Using the ALD CeO₂ process, the effects of Ce doping into an HfO₂ gate dielectric were systematically investigated. Regardless of Ce/(Ce + Hf) composition, all ALD Ce_xHf_1?xO₂ films exhibited constant growth rates of approximately 1.3 Å/cycle, which is essentially identical to the ALD HfO₂ growth rates. After high‐temperature vacuum annealing at 900°C, it was verified, based on X‐ray diffraction and high‐resolution cross‐sectional transmission electron microscopy results, that all samples with various Ce/(Ce + Hf) compositions were transformed from nanocrystalline to stabilized cubic or tetragonal HfO₂ phases. In addition, the dielectric constant of the Ce_xHf_1?xO₂ films significantly increased, depending on the Ce doping content. The maximum dielectric constant value was found to be nearly 39 for the Ce/(Ce + Hf) concentration of ~11%.     

Synthesis of Ion Imprinted Polymers by Copolymerization of Zn(II) and Al(III)8-hydroxy Quinolone Complexes with Divinylbenzene and Methacryclic Acid

In this research work, Zinc(II) and Aluminum(III)-IIP's were synthesized by optimizing the amount of methacrylic acid as monomer, divinylbenzene as cross-linker. The IIP's were functionalized with 8-hydroxy quinolone complexes of the two metal ions under thermal conditions by copolymerization with monomer and cross-linker. The IIP's and Non-IIP's were characterized using FT-IR, TGA, and SEM analysis. A quite remarkable difference in the size was observed of the polymers (Zn(II) 1.0 µm and Al(III) 0.1 µm). A stronger affinity was observed with IIP in comparison with Non-IIP at pH 3.1 and 4.5 for Zn(II) and Al(III) ions on their respective polymers.     

Assessing the impact of palmitic,myristic and lauric acids on hydrogen production from glucose fermentation by mixed anaerobic granular cultures

The effects of lauric (LUA), myristic (MA), palmitic (PA), and a mixture of myristic:palmitic (MA:PA) acids on hydrogen (H₂) production from glucose degradation using anaerobic mixed cultures were assessed at 37 °C with an initial pH set at 5.0 and 7.131 mM of each acid. The maximum H₂ yield (2.53 ± 0.18 mol mol⁻¹ glucose) was observed in cultures treated with PA. A principal component analysis (PCA) of the by-products and the microbial population data sets detected similarities between the controls and PA treated cultures; however, differences were observed between the controls and PA treated cultures in comparison to the MA and LUA treated cultures. The flux balance analysis (FBA) showed that PA decreased the quantity of H₂ consumed via homoacetogenesis compared to the other LCFAs. The control culture was dominated by Thermoanaerovibrio acidaminovorans (60%), Geobacillus sp. and Eubacterium sp. (28%), while Clostridium sp. was less than 1%. Treatment with PA, MA, MA:PA, or LUA increased the H₂ producers (Clostridium sp. and Bacillus sp.) population by approximately 48, 67, 86, and 86%, respectively.