A comparative study of DPSK and OOK WDM transmission over transoceanic distances and their performance degradations due to nonlinear phase noise

We have compared experimentally the transmission performance of return-to-zero differential phase-shift keying (RZ-DPSK) with RZ-ON-OFF keying (OOK), nonreturn-to-zero differential phase-shift keying (NRZ-DPSK), and NRZ-OOK for 100/spl times/10-Gb/s transmission with a spectral efficiency of 0.22 b/s/Hz over transoceanic distances. The Q degradation of the RZ-DPSK after transmission over 9180 km was 3 dB greater than that of RZ-OOK. The experimental results clearly showed the major cause of degradation for DPSK is not cross-phase modulation but self-phase modulation. The calculated nonlinear phase noise, i.e., the Gordon-Mollenauer effect, agreed with the experimental results. A distributed-Raman-amplifier assisted erbium-doped-fiber-amplified transmission line acted well in reducing the nonlinear phase noise.     

Passivation effects of deuterium exposure on boron-doped CVD homoepitaxial diamond

The deuterium (hydrogen) passivation effect on acceptors in boron-doped CVD homoepitaxial diamond was studied by electrical (Hall-effect) and secondary ion mass spectroscopy (SIMS) measurements. Deuterium was incorporated into the samples using microwave (MW) deuterium plasma at 673 K for 2–24 h. We observed the progress of acceptor passivation with p-type conduction, which finally resulted in a highly resistive state.     

Structural change in diamond by hydrogen plasma treatment at room temperature

The structural change of diamond induced by hydrogen plasma exposure at room temperature, and its thermal stability, were investigated using electron spin resonance (ESR), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) techniques. ESR observation revealed that it gave rise to a highly defective structure (spin concentration of 10²⁰ cm^{− 3}), which is very similar to the structure of hydrogenated amorphous carbon (a-C : H) confirmed by XPS and FTIR. Post-annealing was also carried out to clarify the thermal stability of the defects. The number of spin centers decreased with increasing annealing temperature, and eventually, the defective structure changed to a graphitic one by annealing at 800 °C.     

Microporous carbons prepared from cationic surfactant-resorcinol/formaldehyde composites

Microporous carbons have been synthesized by the carbonization of cationic surfactant-resorcinol/formaldehyde (RF) composites, which were themselves formed by electrostatic organic-organic interaction. The porous structure produced by the decomposition of the surfactant plays an important role for the gasification of the RF polymer at higher temperatures. The pore size of the carbon prepared from tetrapropylammonium bromide (TPAB)-RF, cetyltrimethylammonium bromide (C₁₆TAB)-RF and decyltrimethylammonium bromide (C₁₀TAB)-RF mixtures can be estimated as 0.53 nm from the Horvath-Kawazoe method using N₂ adsorption isotherms. Their pore size distributions were very narrow, showing that the microporous carbons derived from surfactant-RF mixture may have promise as adsorbents and membrane materials.     

EPR study of hydrogen-related defects in boron-doped p-type CVD homoepitaxial diamond films

Boron-doped p-type single crystalline chemical vapor deposition (CVD) homoepitaxial diamond films were investigated by electron paramagnetic resonance (EPR). Carbon dangling bond defects, which were accompanied by a nearby hydrogen atom, were observed in boron-doped p-type CVD diamond films on a IIa substrate similar to those observed in undoped diamond. This result suggested that the energy level position of the defects is located below the Fermi energy of boron-doped diamond, at around 0.3 eV above the valence-band top. The reason why the Fermi energy could be changed by the incorporation of boron atoms at low density (10¹⁶–10¹⁷/cm³) in the film in spite of the existence of the large defect density of EPR centers (10¹⁸/cm³) is thought to be that the singly occupied electron states of defects are located near the band edge. As for the thermal annealing effect of the defects, it was revealed that the concentration of the defects and the mobility of the p-type film did not change after annealing up to 1200 °C which is much higher than the temperature of boron–hydrogen pair dissociation.     

MOSAIC for multiple-reward environments

Reinforcement learning (RL) can provide a basic framework for autonomous robots to learn to control and maximize future cumulative rewards in complex environments. To achieve high performance, RL controllers must consider the complex external dynamics for movements and task (reward function) and optimize control commands. For example, a robot playing tennis and squash needs to cope with the different dynamics of a tennis or squash racket and such dynamic environmental factors as the wind. In addition, this robot has to tailor its tactics simultaneously under the rules of either game. This double complexity of the external dynamics and reward function sometimes becomes more complex when both the multiple dynamics and multiple reward functions switch implicitly, as in the situation of a real (multi-agent) game of tennis where one player cannot observe the intention of her opponents or her partner. The robot must consider its opponent's and its partner's unobservable behavioral goals (reward function). In this article, we address how an RL agent should be designed to handle such double complexity of dynamics and reward. We have previously proposed modular selection and identification for control (MOSAIC) to cope with nonstationary dynamics where appropriate controllers are selected and learned among many candidates based on the error of its paired dynamics predictor: the forward model. Here we extend this framework for RL and propose MOSAIC-MR architecture. It resembles MOSAIC in spirit and selects and learns an appropriate RL controller based on the RL controller's TD error using the errors of the dynamics (the forward model) and the reward predictors. Furthermore, unlike other MOSAIC variants for RL, RL controllers are not a priori paired with the fixed predictors of dynamics and rewards. The simulation results demonstrate that MOSAIC-MR outperforms other counterparts because of this flexible association ability among RL controllers, forward models, and reward predictors.     

Separation of C6H6 and C6H12 from H2 using ionic liquid/PVDF composite membrane

Ionic liquid/polyvinylidene fluoride composite membrane was successfully prepared by impregnation method and used for the separation on organic chemical hydride process. The separation factors of C₆H₆/H₂ and C₆H₁₂/H₂ in the ternary mixture system were 7500 and 300, respectively. The ionic liquid membrane showed an excellent possibility as a technology of H₂ purification in the organic chemical hydride process by removing aromatic hydrocarbon and cycloalkane simultaneously from the ternary system. © 2015 American Institute of Chemical Engineers AIChE J, 62: 624–628, 2016     

Three-Dimensional Numerical Simulation of Helically Propagating Combustion Waves

In the present paper, by using a mathematical model for self-propagating high-temperature synthesis, we reveal the three-dimensional structure of so-called spin combustion wave on the inside of cylindrical sample. It is shown that an isothermal surface of regular spin combustion wave has some wings of which number is the same as that of reaction spots on the cylindrical surface and that the isothermal surface with helical wings rotates down with time. Because of this propagating pattern, in this paper, we adopt the more suitable term helical wave. We also obtain the following existence conditions of a helical wave: If physical parameters are set so that a pulsating wave exists stably for the one-dimensional problem, then a helical wave takes the place of a pulsating wave when the radius of cylindrical sample becomes large.