A multiwinding modeling method for high frequency transformers and inductors

This paper presents a method to obtain an electric model for transformers and inductors, including both frequency and geometry effects in the windings, which can be linked with existing core models. One-dimensional distributions for magnetic and electric fields are assumed, and from Maxwell's equations an equivalent electric circuit is easily obtained. This equivalent circuit has been included in analog simulators (Spice, AnalogWorkBench, Saber ...), and comparisons between measured and simulated results are shown, both in time domain and in AC sweep, which verify the model accuracy. The model described in this paper allows designers to deal with key issues in the design of high-frequency magnetic components (copper losses, leakage inductance, skin and proximity effects) by using analog simulators, which are usually more familiar to them than finite-element analysis tools.     

Examination of coping resources and family adaptation in mothers and daughters of incestuous versus nonclinical families.

Mother–daughter dyads from incestuous vs nonclinical families were compared in terms of (1) family life stress, (2) problem-solving appraisal, (3) direct coping behaviors, (4) mother–daughter communication, and (5) family adaptation and cohesion. 15 mother–daughter pairs from an incestuous family involving an adult male caretaker were matched on several variables to 16 mother–daughter pairs from a nonclinical family. The results revealed that mothers from the incest group (compared with the nonclinical group) reported greater amounts of family life stress, had more negative perceptions of their problem-solving appraisal, and reported more communication difficulties. The daughters from the incest group appeared to be quite similar to the nonclinical group daughters, although they did acknowledge more family stress. Implications of the results for therapeutic interventions as well as future research were discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Nephelometric study of salivary protein–tannin aggregates

Grape seed procyanidins were fractionated through different degrees of polymerisation, and human saliva was purified and separated into two fractions: one was mostly α‐amylase and the other was essentially proline‐rich proteins (PRPs). The interaction of these proteins with the procyanidin compounds was assayed using nephelometry, and the influence of several factors was investigated, such as degree of polymerisation, pH and concentrations of both protein and tannin. The same experiments were performed with bovine serum albumin (BSA). The amount of insoluble aggregates, resulting from the formation of polyphenol–protein aggregates, increased quickly up to a maximum value which thereafter remained practically unchanged. pH was set at 5.0 for all further assays, since it was the nearest value to that encountered in human saliva (pH 5.6–7.9), where proteins were stable and had a maximum ability to bind and precipitate procyanidin oligomers. These proteins were shown to have a strong affinity for procyanidin oligomers and were unable to resolubilise the polyphenol–protein aggregates when present in excess. PRPs required a much lower content to bind all the tannins (400 µg of procyanidin oligomers) than BSA and especially α‐amylase (48, 60 and 132 µg respectively). The procyanidin's ability to bind PRPs, BSA and α‐amylase increased with its average molecular weight. This ability increased regularly for PRPs up to 4500 Da, whereas the ability to bind the globular proteins decreased beyond 3400 Da. © 2001 Society of Chemical Industry     

Chitosan particles agglomerated scaffolds for cartilage and osteochondral tissue engineering approaches with adipose tissue derived stem cells

In the XML file of the original article, H. Redl’s affiliation is incorrect. It is listed correctly in both the paper and PDF versions of the article, and can be found below: The online version of the original article can be found at     

Fabry Disease and the Heart: A Comprehensive Review

Fabry disease (FD) is an X-linked lysosomal storage disorder caused by mutations of the GLA gene that result in a deficiency of the enzymatic activity of α-galactosidase A and consequent accumulation of glycosphingolipids in body fluids and lysosomes of the cells throughout the body. GB3 accumulation occurs in virtually all cardiac cells (cardiomyocytes, conduction system cells, fibroblasts, and endothelial and smooth muscle vascular cells), ultimately leading to ventricular hypertrophy and fibrosis, heart failure, valve disease, angina, dysrhythmias, cardiac conduction abnormalities, and sudden death. Despite available therapies and supportive treatment, cardiac involvement carries a major prognostic impact, representing the main cause of death in FD. In the last years, knowledge has substantially evolved on the pathophysiological mechanisms leading to cardiac damage, the natural history of cardiac manifestations, the late-onset phenotypes with predominant cardiac involvement, the early markers of cardiac damage, the role of multimodality cardiac imaging on the diagnosis, management and follow-up of Fabry patients, and the cardiac efficacy of available therapies. Herein, we provide a comprehensive and integrated review on the cardiac involvement of FD, at the pathophysiological, anatomopathological, laboratory, imaging, and clinical levels, as well as on the diagnosis and management of cardiac manifestations, their supportive treatment, and the cardiac efficacy of specific therapies, such as enzyme replacement therapy and migalastat.     

Superabsorbent hydrogel based on modified polysaccharide for removal of Pb2+ and Cu2+ from water with excellent performance

This contribution describes the absorption percentage of Pb²⁺ and Cu²⁺ from water by a superabsorbent hydrogel matrix (SH) made from an anionic polysaccharide copolymerized with acrylic acid (AAc) and acrylamide (AAm). Metal‐absorption tests, upon sequential pH variation, indicated that the SH has pH‐sensitivity for the absorption of both metals from solution, attributed to the functional ionic groups (? COOH) present in the AAc and arabic gum (AG) segments. At the pH 5.0, the SH exhibited good absorption capacity: 73.10% for Pb²⁺, 81.99% for Cu²⁺ in water and 63.64% for Pb²⁺, and 76.67% for Cu²⁺ in saline water with 0.1 mol kg^?1 ionic strength. A replicated 2² full factorial design with a central point was built to evaluate the maximum absorption capacity of the metals into the SH. It was found that both the interaction and main effects of the pH and the initial concentration of metal solution on absorption percentage of the metals were statistically significant. Surface response plots indicated that the absorption capacity of both metals into the SH may be appreciably improved by using the solutions with lower initial concentration of metal and with higher pH values. Metal‐absorption results demonstrated that the SH is a convenient material for absorption of Pb²⁺ and Cu²⁺ from pure aqueous and saline aqueous environments. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Addressing universal access in social networks: an inclusive search mechanism

Social network services (SNSs) have brought new possibilities and challenges to the design of software environments that respect people’s cultural differences. These systems may represent an opportunity for social and digital inclusion. However, search mechanisms in these systems impose serious barriers for people in the process of acquiring digital literacy. One of the barriers is the difficulty of using the adequate terms/keywords to perform content searches. This paper presents an approach to allow ordinary, non-technology proficient people to access the content of a network through the use of search parameters that make sense to them. The proposal is grounded on Semantic Web technologies (Web ontology) combined with Organizational Semiotics concepts and methods to identify the users’ profile and language. A case study was conducted with the search mechanism integrated into a SNS, and a preliminary evaluation reveals the advantages and drawbacks of the approach.     

The biodrying process of sewage sludge – a review

Abstract

Sewage treatment can be classified into three phases: liquid, gaseous, and solid. Treatment of solids is performed in several steps, and the greatest difficulty in removing water from sewage sludge is due to the bound water present in the sludge. Thus, biodrying, a drying method that can be classified as biological, has been recently applied to treat this type of waste. This review paper aims to report and compile data from 49 biodrying assays of sewage sludge found in the literature (through the present, 2019) into one synthesis table, to discuss and compare the numerous variables found in these papers and their implications for biodrying, and to suggest possibilities for future research. This paper additionally intends to improve knowledge of biodrying and to consequently contribute to the monitoring and understanding of the process.     

Gripper Design for Radio Base Station Autonomous Maintenance System

For an autonomous system to perform maintenance tasks in a networking device or a radio base station (RBS), it has to deal with a series of technological challenges ranging from identifying hardware-related problems to manipulating connectors. This paper describes the development of a robot maintenance system dedicated to detect and resolve faulty links caused by unplugged or poorly connected cables. Although the maintenance system relies on four subsystems, we significantly focus on our low-cost and efficient custom gripper solution developed to handle RJ45 Ethernet connectors. To examine our gripper, we conducted three experiments. First, a qualitative questionnaire was submitted to 30 users in the case of the teleoperated scenario of the gripper attached to a robotic arm. Similarly, we also tested the automatic operation mode. The results showed that our system is reliable and delivers a highly efficient maintenance tool in both teleoperated and autonomous operation modes. The practical experiment containing the removal or unplugging of connectors demonstrated our gripper’s ability to adequately handle these, whereas the feedback from the questionnaire pointed to a positive user experience. The automatic test assessed the gripper’s robustness against the continuous operation.

     

Long-term effect of diesel degradation on polyoxymethylene at different temperatures

Diesel is an important fuel, partly because of the longevity and cleanliness of diesel engines. Often, polymers are in direct contact with diesel and understanding compatibility is critical. Polyoxymethylene (POM) is a thermoplastic used to manufacture automotive fuel pump gears and rotors due to its low coefficient of friction and thermal and dimensional stability. In this study, tensile tests were performed on plain and glass fiber reinforced (POM and POMGF) after immersion in diesel at different temperatures (−10°C, 23°C, and 60°C) for 1000, 2000, 3000, 5000, and 10 000 hour. A mathematical model was developed using data from just three tensile stress-strain curves obtained at two different fluid temperatures and three different immersion times. Model and experimental results show good agreement with one another for all conditions tested.