Reynolds number-dependent permeability of wastewater sludge flocs

Most theoretical models assume constant permeability of wastewater sludge floc. This work shows that, at creeping flow limit with small intrafloc Reynolds number, the permeability of floc can not only be affected by floc structure, but also by the external flow condition. The three-dimensional structure of flocs using the fluorescence in situ hybridization (FISH) and the confocal laser scanning microscope (CLSM) was firstly probed. Then, the volumetric grid models for sludge flocs were constructed. We noted that the floc permeability could keep unchanged, increased, or decreased at increased Reynolds number (Re). Flow redistribution among channels of various sizes contributes to the noted Re-dependent permeability of flocs.     

Local heat transfer measurements of plate finned-tube heat exchangers by infrared thermography

An experimental study is performed using an infrared thermovision to monitor temperature distribution over a plate-fin surface inside the plate finned-tube heat exchangers. The differentiation of the temperature function is derived to determine the local convective heat transfer coefficients on the tested fin, using a local element lumped conduction equation included the convective effect on the boundaries with experimental data. It is disclosed that the infrared thermography is capable of rapidly detecting location and extent of transition and separation regions of the boundary layer over the whole surface of the tested models. Through the comparison of the test results on the strategy region of the in-line and staggered arrangements, it is more easy to understand or interpret the detailed dynamic phenomena of flow existed in the heat exchangers. In addition, the experimental results demonstrate that the averaged heat transfer coefficient of staggered configuration is 14-32% higher than that of in-lined configuration     

Synthesis and characterization of poly(N‐vinyl‐2‐pyrrolidone) grafted sodium alginate hydrogel beads for the controlled release of indomethacin

Graft copolymers of sodium alginate (NaAlg) with N‐vinyl‐2‐pyrrolidone were prepared using azobisisobutyronitrile as initiator. The graft copolymers (NaAlg‐g‐PVP) were characterized with Fourier transform infrared spectroscopy, elemental analysis, and differential scanning calorimetry. Polymeric hydrogel beads of NaAlg and NaAlg‐g‐PVP were prepared by crosslinking method using glutaraldehyde (GA) as a crosslinker in the hydrochloric acid catalyst (HCl) and these beads were used to deliver anti‐inflammatory drug, indomethacin (IM). Chemical stability of the IM after encapsulation into beads was confirmed by FTIR. Preparation conditions of the NaAlg‐g‐PVP beads were optimized by considering the percentage entrapment efficiency, particle size, swelling capacity and their release data. In vitro release studies were performed in simulated gastric fluid (pH 1.2) for the initial 2 h, followed by simulated intestinal fluid (pH 7.4) for 4 h. Effects of GA concentration, exposure time to GA, drug/polymer (d/p) ratio, and concentration of HCl on the release of IM were discussed. It was observed that IM release from the beads decreased with increasing GA concentration and exposure time. IM release also decreases with increasing d/p ratio and HCl concentration. The highest IM release was obtained to be 77% for beads crosslinked with 0.027M GA. Swelling experiments were also performed to compute molecular mass between crosslinks of the beads. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Steady-state and transient photoconductivity in hydrogenated amorphous silicon nitride films

Amorphous SiN_x:H films were prepared by the rf glow-discharge decomposition of ammonia/silane gas mixture with varying nitrogen content. The steady-state photoconductivity and its dependence on light intensity have been investigated in a-SiN_x:H as a function of temperature between 100 and 420 K. The electron drift mobility of a set of SiN_x:H samples has been determined from their steady-state photoconductivity and response time measurements. The results suggest that electron drift mobility of the samples was nearly unchanged for a low nitrogen content. Two samples containing lowest nitrogen showed higher photoconductivity than that of unalloyed sample within a temperature range including the room temperature.     

3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview

Recently, polyvinylidene fluoride (PVDF) based nanocomposites have attracted much attention for next-generation wearable applications such as promising piezoelectric energy harvesters (nanogenerators), energy storage devices, sensing devices, and biomedical devices due to their high flexibility, and high dielectric and piezoelectric properties. 3D printing technology, PVDF based piezoelectric nanocomposites, the studies based on 3D printing of PVDF based piezoelectric nanocomposites by inkjet printing and fused deposition modeling, and enhancements of energy harvesting and storage performance of nanocomposites by structural design are comprehensively overviewed here. An insight is provided into 3D printing techniques, structure and properties of PVDF based polymers, various nanofillers and production methods for nanocomposites, solutions to enhance β phase (crystallinity) of PVDF, and improvements of nanocomposites’ breakdown strength, discharged energy density, and piezoelectric power output by mentoring structural design.     

Controlled release of insecticide carbaryl from sodium alginate,sodium alginate/gelatin,and sodium alginate/sodium carboxymethyl cellulose blend beads crosslinked with glutaraldehyde

Interpenetrating network polymeric beads of sodium alginate (NaAlg) and its blend with gelatin (gels) or sodium carboxymethyl cellulose (NaCMC) have been prepared by crosslinking with a common crosslinking agent, glutaraldehyde (GA), for the release of insecticide carbaryl (Carb). The prepared beads were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. Scanning electron microscopy confirmed the spherical nature and surface morphology of the particles. Bead characteristics, such as carbaryl entrapment efficiency, particle size, equilibrium swelling degree, and carbaryl release kinetics, were determined. The effects of the preparation conditions, such as Carb/NaAlg ratio, time of exposure to GA, blend ratio, and temperature of release medium on the carbaryl release, were investigated for 25 days at 25°C. It was observed that the carbaryl release decreased with increase in crosslinking of network, while it increased with increase in Carb/NaAlg ratio and temperature. The release of carbaryl also increased with increase in Gel or NaCMC content in the blend beads. The highest carbaryl release was found to be 100%, for the beads that were prepared with 1 : 1 NaAlg/Gel at 16 days. The diffusion coefficients have been calculated for the transport of insecticide through the polymeric beads, using initial time approximation method. These values were also consistent with the carbaryl release data. The carbaryl release from most of the bead formulations followed the Fickian trend. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1310–1319, 2006     

Effect of chromium aging on the structural and thermal properties of chromium polyacrylate

The effects of aging time of Cr(III) solutions on the structural, thermal, magnetic, and morphological properties of chromium polyacrylate complexes were studied. Chromium retention was found to increase with longer aging periods. IR spectra revealed the formation of polychelate structures with noticeable changes on aging. The interaction of multivalent, polynuclear Cr(III) species with the polymer backbone resulted in a decrease in thermal stability for the complexes prepared from olated chromium solutions. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 490–493, 2005     

Activities of MFI-Supported Rhenium Catalysts for the Aromatization of Methane: Effect of Cationic Form of the Inorganic Carrier

MFI type inorganic carrier was used in two different cationic forms, hydrogen and calcium respectively. MFI-supported molybdenum and rhenium catalysts were prepared. The activities of the catalysts were compared for the aromatization reaction of methane. Higher activity values were attained with the catalysts supported on HZSM-5. Aromatics were also observed with the catalysts supported on CaZSM-5, despite their deficiency in acid sites. Highly dispersed rhenium is expected to be formed with the use of the inorganic carrier in calcium form. On the other hand, lower reaction rates were observed with rhenium supported on CaZSM-5, in spite of the improved dispersion of the active rhenium species on this catalyst. This was interpreted in terms of the critical role of the acid sites in the conversion of methane to aromatics, compared to the improved dispersion of the active metal.     

Interpretation of MR images using self-organizing maps and knowledge-based expert systems

A new image segmentation system is presented to automatically segment and label brain magnetic resonance (MR) images to show normal and abnormal brain tissues using self-organizing maps (SOM) and knowledge-based expert systems. Elements of a feature vector are formed by image intensities, first-order features, texture features extracted from gray-level co-occurrence matrix and multiscale features. This feature vector is used as an input to the SOM. SOM is used to over segment images and a knowledge-based expert system is used to join and label the segments. Spatial distributions of segments extracted from the SOM are also considered as well as gray level properties. Segments are labeled as background, skull, white matter, gray matter, cerebrospinal fluid (CSF) and suspicious regions.