A comparative study of SiAlON ceramics

Two different varieties of Si₃N₄ powders were used to prepare SiAlON ceramics. 100% β-Si₃N₄ was used from refractory grade powders (B1) and another purer 98% α-Si₃N₄ (50A) powder was used to prepare the SiAlON samples. Since SiC + SiAlON composites reportedly perform better, batches were prepared with 15% SiC addition to the refractory powders (B1) and 17.5% SiC was added to the other SiAlON composition (50A). The samples were gas pressure sintered at 1840 °C and at 22 bar with 1 h dwelling time. Thereby, we could achieve 97–98% theoretical density. The hardness was recorded 14–17 GPa while fracture toughness varied from 4.3 to 5 MPa m^1/2. Fretting experiments showed initial running-in period of 300 cycles for all the tribo-couples. After which, the steady state coefficient of frictions (COF) were achieved. Steel ball of 10 mm diameter, fretting against 50A composition, showed 0.6 average steady state COF while the same composition while fretting against alumina ball of the same diameter, showed 0.57 average steady state COF. Results have been compared with SiAlON composition derived from refractory powder (B1) and found that the 50A composition performs better under identical test conditions. Moreover, cytocompatibility study also suggests that the investigated 50A composition can be used as substrate to support cell adhesion and proliferation of L929 mouse fibroblast cell lines whereas B1 composition derived from refractory powders are toxic in nature.     

The effects of modified atmosphere gas composition on microbiological criteria, color and oxidation values of minced beef meat

This paper reports the effects of modified atmosphere gas compositions with different concentrations of CO(2)/O(2)/N(2) on color properties (L*, a* and b* values), oxidation stability (TBARS value) and microbiological properties of minced beef meat stored at +4 °C. Sampling was carried out on the 1st, 3rd, 5th, 7th, 9th, 11th and 14th day of storage. The gas mixtures used were as follows: (i) %30O(2) + %70CO(2) (MAP1), (ii) %50O(2) + %50CO(2) (MAP2), (iii) %70O(2) + %30CO(2) (MAP3), (iv) %50O(2) + %30CO(2) + %20N(2) (MAP4), and (v) %30O(2) + %30CO(2) + %40N(2) (MAP5). Control samples (AP) were packaged under atmospheric air. Pseudomonas, lactic acid bacteria, Brochothrix thermosphacta, and Enterobacteriaceae members were monitored. Among these five modified atmosphere gas compositions, the best preservation for minced beef meat was in MAP4 gas combination maintaining acceptable color together with oxidation stability and acceptable microbial loads until the end of storage period of fourteen days.     

Consistency requirements in business process modeling: a thorough overview

Software and Systems Modeling - The field of business process modeling has been beset by inter-model consistency problems which are mainly due to the existence of multiple variants of the same...     

Tribological behavior of αı/βı-SiAlON-TiN composites

There are limited studies on the tribological properties of SiAlON-TiN composites. Therefore, in the present study, tribology tests were conducted on a number of α^?/β^?-SiAlON-TiN composites with different α^?/β^?-SiAlON phase ratio and TiN content, fabricated with unique compositional design. The influence of α^?/β^?-SiAlON phase ratios, microstructure, mechanical properties and TiN content on friction and wear behavior was investigated and wear mechanisms were explained. Tribology tests were conducted on computer controlled tribometer under dry unlubricated ambient conditions with a linear reciprocating movement in a ball-on-disc sliding wear configuration and test parameters kept as constant. It was observed that TiN addition (17?wt.%) did not change the friction (CoF) of SiAlON and wear rate and wear volume were observed to increase. Wear mechanisms showed differences with α^?:β^?-SiAlON phase ratio. Fracture toughness had very pronounced effect on wear resistance.     

Ultrastructure of male reproductive system of Eurydema ventrale Kolenati 1846 (Heteroptera: Pentatomidae)

The male reproductive system of Eurydema ventrale Kolenati 1846 is studied morphologically and histologically by using light, scanning and transmission electron microscopes. The reproductive system of the male E.ventrale consists of a pair of testis, a pair of vas deferens, a pair of seminal vesicles, accessory glands, a bulbus ejaculatorius, a pair of ectodermal sacs, and a ductus ejaculatorius. The testicular follicles have three different development zones (growth zone, maturation zone, and differentiation zone). The testes are connected to the seminal vesicles by the vas deferens that is a specialized in sperm storage. Sperm have an elongated head and a tail (flagellum) with an axonema and two mitochondrial derivatives. Vas deferens and seminal vesicles are fine, long, and cylindrical. The seminal vesicle is connected with bulbus ejaculatorius, which is balloon shaped and surrounded with accessory glands. The bulbus ejaculatorius is continuous with ductus ejaculatorius which is connected to the aedeagus. Microsc. Res. Tech. 78:643–653, 2015. © 2015 Wiley Periodicals, Inc.     

Fabrication of Functionally Graded SiAlON Ceramics by Tape Casting

Functionally graded SiAlON ceramics (FG-SiAlONs) were successfully prepared by the tape casting and lamination approach. Non-aqueous SiAlON slurries with five different α to β-SiAlON ratios (85α:15β, 70α:30β, 55α:45β, 40α:60β, and 25α:75β) were prepared by a 66 methyl ethyl ketone/34 ethanol (vol%) mixture. Phase and microstructure analyses incorporation with hardness measurements clearly show that the FG-SiAlONs, prepared by tape casting, exhibit a continuous and gradual change in composition and hardness. Thus, the tape casting approach is a viable method to produce FG-SiAlONs with a precisely controlled composition, and subsequently properties, as a function of position.     

Structural and histological observations on the male reproductive system of adult red poplar leaf beetle Chrysomela populi Linnaeus, 1758 (Coleoptera: Chrysomelidae)

This study described the anatomy and histology of the male reproductive system in Chrysomela populi, which is an economically important species belonging to the family Chrysomelidae. Therefore, reproductive biology has been studied to combat this insect. As well as, the characters associated with the reproductive tract have been potential to discuss aspects of the system and to better understand the reproductive dynamics. The male reproductive system of C. populi has a pair of testes, a pair of vas efferentia and deferentia, a pair of seminal vesicles, a pair of accessory glands, an ejaculatory bulb, an ejaculatory duct, and an aedeagus. The testis consists of two flower-shaped lobes. Each testis has 20 sperm tubules (testicular follicles) containing cysts of germ cells at various developmental stages within the light orange peritoneal sheath. Testicular follicles are composed of three different (growth, maturation, and differentiation) zones. In the middle region of each testis joins with the vas efferens. The testis is attached to the seminal vesicle by a small stalk like vas efferens. In the lumen of the vas efferens, seminal vesicle, and vas deferens, sperms form clumps in the form of thin threads. The proximal end of the vas deferens is connected to the common ejaculatory duct. It joins with the ejaculatory bulb. Around the ejaculator bulb, there is a pair of convoluted, flat-surface tubular structure accessory glands. Posterior ejaculatory duct joins with the aedeagus.     

Internal calvarial bone distraction in rabbits with delayed-onset coronal suture synostosis

Recent studies have identified a subpopulation of craniosynostotic individuals who exhibit progressive or delayed-onset synostosis and mild craniofacial growth abnormalities. These individuals may be good candidates for nonextirpation, distraction osteogenesis therapy. The present study was designed to test this hypothesis by using internal calvarial bone distraction in a rabbit model with familial delayed-onset craniosynostosis. Data were collected from 159 rabbits: 71 normal controls, 72 with delayed-onset coronal suture synostosis, 8 with delayed-onset coronal suture synostosis and coronal suturectomy, and 8 with delayed-onset coronal suture synostosis and distraction. At 10 days of age, all rabbits had amalgam markers placed on both sides of the frontonasal, coronal, and anterior lambdoidal sutures. At 25 days of age, correction was accomplished through either a 5-mm-wide suturectomy or distraction osteogenesis. An internal distraction appliance was fixed to the frontal and parietal bones and percutaneously and intermittently activated at an average of 0.10 mm/day for 42 days (4.11 mm total). Serial radiographs were taken at 10, 25, 42, and 84 days of age. Results revealed that rabbits with delayed-onset synostosis had significantly (p < 0.01) reduced coronal suture growth rates (0.04 mm/day) compared with the other three groups (0.07 mm/day). Rabbits with suturectomy and rabbits with distraction showed similar coronal suture responses. However, from 42 to 84 days of age, rabbits with distraction showed reduced growth at the vault sutures and abnormal growth patterns in cranial vault width, cranial vault shape, and cranial base angulation compared with the other three groups. Results demonstrated that, although the normal coronal suture growth rate was maintained in rabbits with delayed-onset synostosis using intermittent distraction osteogenesis, normal adult craniofacial structure was not achieved. Such anomalous growth was probably a result of altered growth vectors and compressive forces at adjacent sutures during distraction. These findings suggest that distraction osteogenesis without corticotomy may be a treatment alternative in individuals with progressive, delayed-onset synostosis, but that internal appliances that generate low-level, continuous distractive forces should be investigated and developed.