Synthesis and properties of peroxy derivatives of epoxy resins based on Bisphenol A: Effects of the presence of boron trifluoride ethereate

Oligomers containing peroxy groups have been synthesized on the basis of epoxides reacting with tert–butylhydroperoxide in the presence of boron trifluoride etherate. Dependence of reaction rates upon the quantity of catalyst, temperature and also nature of hydroperoxide has been investigated: A kinetic equation for the process has been formulated and also a kinetic scheme for the reaction taking into account the presence of boron trifluoride etherate is proposed. Structures of the synthesized peroxy oligomers have been confirmed by IR- and NMR-spectroscopy. The reaction initiating properties of the oligomers so synthesized were studied using as the example the styrene polymerization reaction. Electronic Publication     

The PIBETA spectrometer for studying rare and forbidden decays of muons and pions

The construction and characteristics of the PIBETA spectrometer are described. This spectrometer is designed to implement a program of precise measurement of pion decay ^{+ 0} + e ⁺ + _e at the Paul Scherrer Institute (Switzerland). A spherical calorimeter, consisting of 240 crystals of pure CsI scintillator and embracing a solid angle of 3, is the main detector of the setup. In addition, the spectrometer is composed of an active collimator (which also acts as a beam degrader), a segmented active plastic target, two multiwire cylindrical proportional chambers, a 20-element cylindrical plastic hodoscope, and veto counters of cosmic muons.__________Translated from Pribory i Tekhnika Eksperimenta, No. 2, 2005, pp. 39–48.Original Russian Text Copyright © 2005 by Baranov, Kalinnikov, Karpukhin, Khomutov, A. Korenchenko, S. Korenchenko, Kravchuk, Kuchinskii, Mzhaviya, Rozhdestvenskii, Sidorkin, Tsamalaidze, Sakhelashvili, Frlez, Poanic, Li, Minehart, Smith, Stephens, Ziock, Bertl, Horisberger, Ritt, Schnyder, Wirtz, Ritchie, Supek, Kozlowski.     

Neutrophils Mediate Pulmonary Artery Thrombosis In Situ

Pulmonary embolism is a life-threatening condition, which can result in respiratory insufficiency and death. Blood clots occluding branches of the pulmonary artery (PA) are traditionally considered to originate from thrombi in deep veins (usually in legs). However, growing evidence suggests that occlusion of the vessels in the lungs can develop without preceding deep vein thrombosis (DVT). In this work, we used an inferior vena cava (IVC) complete ligation model of DVT in Wistar rats to explore the possibility and mechanisms of PA thrombosis under the conditions where all routes of thrombotic mass migration from peripheral veins are blocked. We demonstrate that rats both with normal and reduced neutrophil counts developed thrombi in the IVC, although, neutropenia caused a substantial decrease in thrombus size and a shift from fresh fibrin toward mature fibrin and connective tissue inside the thrombus. Massive fibrin deposition was found in the PA branches in the majority of DVT rats with normal neutrophil counts, but in none of the neutropenic animals. Neutrophil ablation also abolished macroscopic signs of lung damage. Altogether, the results demonstrate that thrombi in the lung vasculature can form in situ by mechanisms that require local neutrophil recruitment taking place in the DVT setting.     

Determination of diffusion coefficients in film systems on the basis of Fe/Cr and Cu/Cr

This paper presents the results of investigation of condensation stimulated (CSD) and thermal stimulated (TSD) diffusion in nanoscale film systems on the basis of Fe/Cr and Cu/Cr by Auger-electron spectroscopy method. The film systems were built in ultrahigh vacuum. Auger spectrum was traced during condensation after each increase in thickness of 0.5-1 nm or during film systems annealing from 300 to 683 K over 5 h. According to experimental data the concentration profiles were built and the effective coefficients of CSD and TSD were computed by several mathematical methods. The efficiency of these techniques in different cases was analyzed. The most accurate results were obtained with Weeple and Gauss error methods that take into account the thickness of the diffusant source.     

Environmental and individual exposure to secondhand aerosol of electronic cigarettes in confined spaces: Results from the TackSHS Project†

Secondhand electronic cigarette (e-cigarette) aerosol (SHA) might impair indoor air quality and expose bystanders. This study aims to investigate exposure to SHA in controlled conditions of enclosed settings simulating real-world scenario. An experiment was performed in a car and in a room, in which SHA was generated during a 30-minute ad libitum use of an e-cigarette. The experiment was replicated on five consecutive days in each setting. We measured PM_2.5, airborne nicotine concentrations, and biomarkers of exposure to SHA, such as nicotine metabolites, tobacco-specific nitrosamines, propylene glycol, and glycerol in bystanders’ saliva samples before, during, and after the exposure period. Self-reported health symptoms related to exposure to SHA were also recorded. The results showed that the highest median PM_2.5 concentration was recorded during the exposure period, being 21 µg/m³ in the room setting and 16 µg/m³ in the car setting—about twofold increase compared to the baseline. Most concentrations of the airborne nicotine and all biomarkers were below the limit of quantification in both settings. Bystanders in both settings experienced some short-term irritation symptoms, expressed as dry throat, nose, eyes, and phlegm. In conclusion, short-term use of an e-cigarette in confined spaces increased indoor PM_2.5 level and caused some irritation symptoms in bystanders.     

eDNA Inactivation and Biofilm Inhibition by the PolymericBiocide Polyhexamethylene Guanidine Hydrochloride (PHMG-Cl)

The choice of effective biocides used for routine hospital practice should consider the role of disinfectants in the maintenance and development of local resistome and how they might affect antibiotic resistance gene transfer within the hospital microbial population. Currently, there is little understanding of how different biocides contribute to eDNA release that may contribute to gene transfer and subsequent environmental retention. Here, we investigated how different biocides affect the release of eDNA from mature biofilms of two opportunistic model strains Pseudomonas aeruginosa ATCC 27853 (PA) and Staphylococcus aureus ATCC 25923 (SA) and contribute to the hospital resistome in the form of surface and water contaminants and dust particles. The effect of four groups of biocides, alcohols, hydrogen peroxide, quaternary ammonium compounds, and the polymeric biocide polyhexamethylene guanidine hydrochloride (PHMG-Cl), was evaluated using PA and SA biofilms. Most biocides, except for PHMG-Cl and 70% ethanol, caused substantial eDNA release, and PHMG-Cl was found to block biofilm development when used at concentrations of 0.5% and 0.1%. This might be associated with the formation of DNA–PHMG-Cl complexes as PHMG-Cl is predicted to bind to AT base pairs by molecular docking assays. PHMG-Cl was found to bind high-molecular DNA and plasmid DNA and continued to inactivate DNA on surfaces even after 4 weeks. PHMG-Cl also effectively inactivated biofilm-associated antibiotic resistance gene eDNA released by a pan-drug-resistant Klebsiella strain, which demonstrates the potential of a polymeric biocide as a new surface-active agent to combat the spread of antibiotic resistance in hospital settings.     

Cold Model Investigations of Melting of Ice in a Gas-Stirred Vessel

The melting of steel scrap in high temperature liquid iron melt is investigated by conducting cold model experiments of the melting of ice sample of different geometries and sizes in an argon-stirred vessel containing water. The melting process of ice samples is observed using a high-speed camera. Design of experiments is based on similarity criteria. The relationships between non-dimensional groups related to heat transfer (Nu, Re, Pr, and Gr) are derived for different experimental conditions. The results are compared with those reported in the literature. The heat transfer coefficient is estimated as a function of mixing power and is found to be in good agreement with the calculated values obtained by using reported relationships in literature.