Concentration influences on recovery in a high gradient magneticseparation axial filter

The buildup differential equations for the case of a single wire in high gradient magnetic filtration (HGMF)-axial configuration taking into account the suspension concentration are solved. A new equation for the deposit contour surface at different moments and for different suspension concentrations are obtained. The existence of a particulate suspension concentration, for which the radial extension velocity of deposit is maximum, is evidenced. The recovery for an ordered ferromagnetic matrix is calculated. The influence of the solid particle concentration from suspension on the filtration efficiency is presented     

Increase of regression speed of combustion through oxidizer doping

This paper presents an innovative method to increase the regression speed of a solid fuel grain by using oxidizer doping. The results obtained on a propulsion application showing the performance parameters as an output of a numerical model are provided. Two models are given that predict the regression speed increase for embedding wires and for oxidizer doping with a factor of ～2 to 3. Also, it is shown that this increase of the regression speed by using a low oxidizer doping percentage, which is based on the assumption that at a higher doping rate the combustion instabilities, can lead to detonations. Next, a thermochemical model for the combustion within the oxidizer doping model is afforded. For this model, the burn is assumed to take place around the surface of each of the oxidizer particles, being composed of two different burning processes: one is the burning on the surface of the solid fuel grain and the other is the burning between the solid fuel and the solid oxidizer. For a non-doped fuel grain, the burning takes place only on the surface of the fuel grain. Finally, a potential application of such propulsion units to small satellite launchers is presented, and a case study of such a vehicle intended to place a 50 kg payload on a low earth orbit (300 to 500 km altitude) is described. The modelling proposed is based on the assumption that the use of solid methane makes this launcher environmentally friendly.     

A novel UV-mediated low-temperature sintering of TiO2 for dye-sensitized solar cells

Titania pastes were fired at 450 °C in oxygen to give white titania that was used to prepare dye-sensitized solar cells (DSSC). Titania fired at lower temperature and/or under inert atmosphere have brown stripes and cells made from these stripes had no measurable efficiency. When the titania paste was screen printed and then heated and simultaneously irradiated with UV light, white stripes were obtained. Improved efficiency was noted for PV cells made from pastes heated at lower temperature under irradiation vs. cells made from low-temperature heated paste but without irradiation. UV irradiation appears to facilitate clean oxidation of residual organic materials in the titania precursor pastes. The best cells in our study made with our titania paste treated at 450 °C in oxygen had the following characteristics: efficiency=3.45%; V_oc=630 mV; J_sc=8.5 mA/cm²; and a fill factor=0.64.     

Sinanodonta woodiana (mollusca: bivalvia: unionidae): isolation and characterization of the first microsatellite markers

Sinanodonta woodiana (Lea, 1834) is a large Unionid species with a real invasion success. It colonized Europe, Central America, the Indonesian Islands and recently North America. The species life cycle involves a larval parasitic stage on freshwater fish species which contributes to the spread of the mussel. In this paper we describe, for the first time, eight polymorphic microsatellite loci for the species Sinanodonta woodiana. The genetic screening of individuals confirmed that all loci were highly polymorphic. The number of alleles per locus ranged from 7 to 14 and the observed heterozygosity ranged from 0.650 to 0.950. These loci should prove useful to study the species population genetics which could help to infer important aspects of the invasion process.     

The encapsulation effect of UV molecular absorbers into biocompatible lipid nanoparticles

The efficiency of a cosmetic product depends not only on the active ingredients, but also on the carrier system devoted to improve its bioavailability. This article aims to encapsulate two couples of UV molecular absorbers, with a blocking action on both UV-A and UV-B domains, into efficient lipid nanoparticles. The effect of encapsulation on the specific properties such as sun protection factor and photostability behaviour has been demonstrated. The lipid nanoparticles with size range 30-350 nm and a polydispersity index between 0.217 and 0.244 are obtained using a modified high shear homogenisation method. The nanoparticles had spherical shapes with a single crystallisation form of lipid matrices characteristic for the least ordered crystal structure (α-form). The in vitro determination of photoprotection has led to high SPF ratings, with values of about 20, which assure a good photoprotection and filtering about 95% of UV radiation. The photoprotection effect after irradiation stage was observed to be increased more than twice compared to initial samples as a result of isomerisation phenomena. All the results have shown that good photoprotection effect and improved photostability could be obtained using such sunscreen couples, thus demonstrating that UV absorbers-solid lipid nanoparticles are promising carriers for cosmetic formulations.     

Designing polylactide/clay nanocomposites for textile applications: Effect of processing conditions,spinning, and characterization

An experimental study was carried out to design polylactide (PLA)-clay nanocomposites for developing fibers. PLA and 1–10 wt % of a selected organomodified bentonite (Bentone® 104-B104) were melt mixed to examine the effect of processing conditions (temperature, shear, residence time) on the morphology of performed polymer nanocomposites (PNC). Because of a good compatibility with PLA matrix, the dispersion of B104 occurred under different conditions without difficulty, and a similar morphology was obtained. The results obtained showed that at low temperature of mixing, the shear stress exerted on polymer has a key role on the extent of intercalation and delamination. Upscale experiments were further performed using optimized conditions and 4 wt % B104 was added to PLA matrix by melt blending to produce PNC for spinning. Then, the recovered PNC were melt spun to produce multifilaments yarns, and it was demonstrated that surprisingly, it is not necessary to use a plasticizer to spin a blend with 4 wt % B104. The properties of the yarns have been studied in terms of clay dispersion as well as thermal, mechanical, and shrinkage properties. B104 could be added up to 4 wt % into PLA without detrimentally sacrificing the tensile strength of melt-spun filaments, especially at high draw ratio. Interestingly, the PNC-based multifilaments were knitted and the flammability studied using cone calorimeter at 35 kW/m². A strong decrease, up to 46%, of the heat release rate was measured. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Pyrene functionalized side chain alanine and histidine containing copolyacrylates prepared by free radical copolymerization

An optically active copolyacrylate, poly(N‐acryloyl‐L‐alanine‐co‐N‐acryloyl‐L‐histidine), is prepared by classical radical copolymerization of N‐acryloyl‐L‐alanine and N‐acryloyl‐L‐histidine, and further chemically modified with 1‐pyrene‐methanol. The structures of the synthesized compounds are confirmed by spectral analysis (FTIR, ¹H/¹³C‐NMR, UV, fluorescence spectroscopy), thermal methods, and molecular weight measurements. Also, their optical activity is studied using circular dichroism (CD) spectroscopy and optical rotation measurements. The specific rotation values reveal that the direction of rotation of the parent copolymer is dictated by the monomer containing L‐alanine. CD data suggest negative and positive Cotton effects regarding the monomers with amino acids. In the case of the unmodified copolymer it is noted the changes of ellipticity values with increasing pH while the random‐coil conformation is preserved, which makes it suitable as a pH‐responsive system. Photochemical and photophysical investigations reveal that the pyrene‐functionalized chiroptical copolyacrylate can be used as a fluorescent chemosensor for the detection of nitro‐derivatives in organic media. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44457.     

Transverse high gradient magnetic filter cell with bounded flowfield

The capture of fine paramagnetic particles from a fluid suspension in a magnetic filter element of a novel design is analyzed. Unlike the systems previously analyzed, in our model the flow is bounded by two-by-two parallel planar plates, and the ferromagnetic wires are installed outside these spaces, within planes parallel with the plates. Our analysis is based on the study of particle trajectories, considering the laminar flow of carrier fluid, From these we establish the conditions for the maximum recovery of the particles in suspension. This study is useful in designing magnetic filter batteries with corrosion-protected ferromagnetic wires     

Exercise limitation in obstructive lung disease

OBJECTIVE: To study the relationship of resting pulmonary function to maximal exercise power output (Wmax) in obstructive lung disease (OLD). SETTING: University Hospital Pulmonary Function Laboratory. SUBJECTS: Twenty-five patients with OLD (6 with asthma and 19 with COPD). METHODS: Measurement of pulmonary lung function, resting arterial blood gases, and maximal symptom-limited exercise on a cycle ergometer. RESULTS AND CONCLUSIONS: In OLD, the only significant contributor to Wmax was the inspiratory capacity (r2 = 0.66; p < 0.001).