Synthesis,characterization and charge transport properties of Pr–Ni Co-doped SrFe2O4 spinel for high frequency devices applications

Ferrites are materials of interest due to their broad applications in high technological devices and a lot of research has been focused to synthesize new ferrites. In this regard, an effort has been devoted to synthesize spinel Pr–Ni co-substituted strontium ferrites with a nominal formula of Sr_1-xPr_xFe_2-yNi_yO₄ (0.0 ≤ x ≤ 0.1, 0.0 ≤ y ≤ 1.0). The cubic structure of pure and Pr–Ni co-substituted strontium ferrite samples calcinated at 1073 K for 3 h has been confirmed through X-ray diffraction (XRD). Average sizes of crystallites (18–25 nm) have been estimated from XRD analysis and nanometer particle sizes of synthesized ferrites have been further verified by scanning electron microscopy (SEM). SEM results have also shown that particles are mostly agglomerated and all the samples possess porosity. It has been observed that at 298 K, the values of resistivity (ρ) increase, while that of AC conductivity, dielectric loss, and dielectric constants decrease with increasing amounts of Pr³⁺ and Ni²⁺ ions. The values of dielectric parameters initially decrease with frequency and later become constant and can be explained on the basis of dielectric polarization. Electrochemical impedance spectroscopy (EIS) studies show that the charge transport phenomenon in ferrite materials is mainly controlled via grain boundaries. Overall, synthesized ferrite materials own enhanced resistivity values in the range of 1.38 × 10⁹–1.94 × 10⁹ Ω cm and minimum dielectric losses, which makes them suitable candidates for high frequency devices applications.     

Dispersion analysis of multilayer cylindrical transmission linescontaining magnetized ferrite substrates

Recently, there has been a growing interest in using cylindrical transmission lines that contain magnetized ferrite material in a variety of applications. In this paper, the finite-difference time-domain (FDTD) method (in cylindrical coordinates) and the spectral-domain analysis (SDA) are used to calculate the propagation characteristics of cylindrical transmission lines that contain magnetized ferrite material. The magnetization can be either in the longitudinal or azimuthal directions. Specifically, the cylindrical microstrip line, and the cylindrical coplanar waveguide printed on magnetized ferrite substrate are analyzed. Both the FDTD and SDA results are in very good agreement. In addition, the results are compared to those of planar structures by taking the radius of the substrate to be large enough such that the curvature effect is negligible     

Rate of ammonia oxidation in a synthetic saline wastewater by a nitrifying mixed‐culture

Most of the kinetic studies on nitrification have been performed in diluted salts medium. In this work, the ammonia oxidation rate (AOR) was determined by respirometry at different ammonia (0.01 and 33.5 mg N‐NH₃ L^?1), nitrite (0–450 mg N‐NO₂^? L^?1) and nitrate (0 and 275 mg N‐NO₃^? L^?1) concentrations in a saline medium at 30 °C and pH 7.5. Sodium azide was used to uncouple the ammonia and nitrite oxidation, so as to measure independently the AOR. It was determined that ammonia causes substrate inhibition and that nitrite and nitrate exhibit product inhibition upon the AOR. The effects of ammonia, nitrite and nitrate were represented by the Andrews equation (maximal ammonia oxidation rate, r_AOMAX, = 43.2 [mg N‐NH₃ (g VSS_AO h)^?1]; half saturation constant, K_SAO, = 0.11 mg N‐NH₃ L^?1; inhibition constant K_IAO, = 7.65 mg N‐NH₃ L^?1), by the non‐competitive inhibition model (inhibition constant, K_INI, = 176 mg N‐NO₂^? L^?1) and by the partially competitive inhibition model (inhibition constant, K_INA, = 3.3 mg N‐NO₃^? L^?1; α factor = 0.24), respectively. The r_AOMAX value is smaller, and the K_SAO value larger, than the values reported in diluted salts medium; the K_IAO value is comparable to those reported. Process simulations with the kinetic model in batch nitrifying reactors showed that the inhibitory effects of nitrite and nitrate are significant for initial ammonia concentrations larger than 100 mg N‐NH₄⁺ L^?1. Copyright © 2005 Society of Chemical Industry     

Video compression using spatiotemporal regularity flow.

We propose a new framework in wavelet video coding to improve the compression rate by exploiting the spatiotemporal regularity of the data. A sequence of images creates a spatiotemporal volume. This volume is said to be regular along the directions in which the pixels vary the least, hence the entropy is the lowest. The wavelet decomposition of regularized data results in a fewer number of significant coefficients, thus yielding a higher compression rate. The directions of regularity of an image sequence depend on both its motion content and spatial structure. We propose the representation of these directions by a 3-D vector field, which we refer to as the spatiotemporal regularity flow (SPREF). SPREF uses splines to approximate the directions of regularity. The compactness of the spline representation results in a low storage overhead for SPREF, which is a desired property in compression applications. Once SPREF directions are known, they can be converted into actual paths along which the data is regular. Directional decomposition of the data along these paths can be further improved by using a special class of wavelet basis called the 3-D orthonormal bandelet basis. SPREF -based video compression not only removes the temporal redundancy, but it also compensates for the spatial redundancy. Our experiments on several standard video sequences demonstrate that the proposed method results in higher compression rates as compared to the standard wavelet based compression.     

Study of the morphology and mechanical properties of polypropylene composites with silica or rice‐husk

The mechanical, morphological behavior and water absorption characteristics of polypropylene (PP) and silica, or PP and rice‐husk, composites have been studied. The silica used in this study as filler was a commercial type produced from soluble glass or rice husks. The compatibilizing effect of PP grafted with monomethyl itaconate (PP‐g‐MMI) and/or with vinyltriethoxysilane (PP‐g‐VTES) as polar monomers on the mechanical properties and water absorption was also investigated. In general, a high loading of the studied fillers in the polymer matrix increases the stiffness and the water absorption capacity. This effect is more noticeable in the tensile modulus of the PP/silica composite with PP‐g‐VTES as compatibilizer. However, the increase of the rice‐husk charge as a natural filler in the PP matrix decreases the stiffness, and in the presence of PP‐g‐MMI as compatibilizer in PP/rice‐husk, the tensile modulus and water absorption of the composite were improved. The better adhesion and phase continuity in the PP/silica and PP/rice‐husk composites with different compatibilizers was confirmed by the morphological study. Copyright © 2004 Society of Chemical Industry     

Processing of engineering ceramics with high power CO2 lasers

The hardness and brittleness of high performance engineering ceramics such as zirconia, aluminia, silicon carbide and silicon nitride makes traditional processing very expensive and time consuming. Efforts have been made to cut thick commercial ceramics with a continuous wave CO₂ laser. The results obtained so far are very promising and materials up to 10 mm in thickness have been cut successfully.     

Haemolytic activity of Aeromonas species isolated in Libya

Twenty seven Aeromonas strains (5A. hydrophila, 8A. sobria and 14A. caviae) isolated from children with diarrhoea and 34 Aeromonas strains (9A. hydrophila, 7A. sobria an 18A. caviae) isolated from children without diarrhoea were tested from haemolysin production. The results obtained showed that haemolysin production using human, horse or sheep erythrocytes was significantly associated with A.hydrophila and A sobria but not with A.caviae, regardless of whether these strains were isolated from children with or without diarrhoea. Human or horse rather than sheep erythrocytes are recommended for use in the haemolysin assay.     

Long-term energy scenarios for Mexico: Policy options for carbon savings and main barriers

This paper shows that possibilities exist for maintaining current energy-related carbon emissions per capita in Mexico at almost constant levels in the long term. It is argued, however, that the identified carbon emissions reductions will not be achieved easily or rapidly, as they require a restructuring of Mexico's current technological base and an unusual degree of coordination among the government, lending institutions, equipment manufacturers, and final users. Such changes also will entail surmounting major institutional and financial barriers and creating a better international environment for technology transfer and capital lending.