A Stream X-Machine Tool for Modelling and Generating Test Cases for Chronic Diseases Based on State-Counting Approach

Programming and Computer Software - In the biomedical domain, diagrammatical models have been extensively used to describe and understand the behaviour of biological organisms (biological agents)...     

Large-scale SRAM-based IP lookup architectures using compact trie search structures

SRAM-based pipelined architectures for high-speed IP lookup using Field Programmable Gate Arrays (FPGAs) has recently attracted a great deal of attention from researchers. Due to the limited amount of on-chip memory and the number of I/O pins of FPGAs, compact data structures providing high memory efficiency are in great demand.     

Viscoelastic and Processing Effects on the Fiber-Matrix Interphase Strength. Part I. The Effects of Loading Rate, Test Temperature, Fiber Sizing and Global Strain Level

The effects of loading rate, fiber sizing, test temperature and global strain level on the adhesion strength between carbon fibers and a thermosetting epoxy (Epon 815) are studied using the single fiber fragmentation test procedure. Analytical methodology describing the viscoelastic behavior observed is also presented. The possibility of rate-temperature-interphase thickness superposition for the interfacial strength function is illustrated based on the analytical models discussed. Experimental data are discussed using Weibull statistics and also presented in the form of percent relative frequency histograms for the fiber fragments in a collective fashion. The use of histograms allows for interpretation of the skewness in the data population.     

Fabrication of chitosan/polyvinyl alcohol/amine modified carbon nanotube composite films for rapid chromate removal

Composite adsorbent films with amine and hydroxyl functionalities were synthesized from chitosan (CS), polyvinyl alcohol (PVA), and amine-modified carbon nanotubes (a-MWCNT) by solvent casting method. Weight proportions of CS to PVA and weight percent of a-MWCNT were optimized to achieve highest chromate removal capacity. Structural characteristics of the composites were investigated using scanning electron microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, and thermal gravimetric analysis. Accordingly, incorporation of a-MWCNT to CS/PVA structure resulted in the generation of nanochannels, which enhanced adsorption capacity. Moreover, the composite comprising 0.4% wt. a-MWCNT provided over 99% of Cr (VI) removal from 50 mg L⁻¹ Cr (VI) solution within five minutes of contact time. Redlich–Peterson and Radke–Prausnitz isotherm models provided the highest conformity to adsorption data. Maximum chromate sorption capacity of CS/PVA/a-MWCNT composite film was determined as 134.2 mg g⁻¹ being 172% higher than that of CS/PVA. Regeneration was best achieved in 1.0 M NaOH and the composite was shown to retain at least 70% of its original capacity after five consecutive adsorption–desorption cycles.     

The current–voltage and capacitance–voltage characteristics of molecularly modified β-carotene/n-type Si junction structure with fluorescein sodium salt

β-Carotene–FSS organic semiconductor/n-type Si structure has been characterized by current–voltage and capacitance–voltage methods. A deviation in I–V characteristic of the diode is observed due to effect of series resistance and interfacial layer. Cheung's functions were used to calculate diode parameters. The ideality factor, series resistance and barrier height values of the diode are n = 1.77, R_s = 10.32 (10.39) kΩ and 0.78 eV. The obtained ideality factor suggests that Au/β-carotene–FSS/n-Si Schottky diode has a metal–SiO₂ oxide layer plus organic layer–semiconductor (MIOS) configuration. The capacitance–voltage characterizations of Au/β-carotene–FSS/n-Si diode at different temperatures were performed. The capacitance of the diode changes with temperature. The barrier height and ideality factor obtained from C–V curves are 0.67 eV and 1.68. The interface density properties of the diode are analyzed and the shape of the density distribution of the interface states is in the range of E_c −0.49 to −0.62 eV. It is evaluated that the FSS organic layer controls electrical charge transport properties of Au/β-carotene/n-Si diode by excluding effects of the β-carotene and SiO₂ residual oxides on the hybrid diode.     

Signal-adaptive discrete evolutionary transform as a sparse time–frequency representation

Discrete evolutionary transform (DET) has usually been applied to signals in a blind-way without using any parameters to characterize the signal. For this reason, it is not optimal and needs improvement by using some information about the signal. In this paper, we propose an improvement for the discrete evolutionary transform in order to obtain a sparse representation and redefine the generalized time-bandwidth product optimal short-time Fourier transform as a special case of it. In case of linear FM-type signals, the optimized kernel function of the transform is determined according to signal parameters including the instantaneous frequency. The performance of the adaptive-DET is illustrated on three distinct cases. In case of multi-component LFM signals, when the concentration of the proposed distribution is compared to the ordinary sinusoidal-DET, the improvement is computed as 28% in terms of the ratio of norms. Furthermore we define a new and a general class of distribution functions named as the short-time generalized discrete Fourier transform (ST-GDFT) which is a larger set of signal representations including the adaptive-DET.     

Using an artificial bee colony algorithm for the optimal placement of viscous dampers in planar building frames

In this study, an Artificial Bee Colony Algorithm (ABCA) is used to obtain the optimal size and location of viscous dampers in planar buildings to reduce the damage to the frame systems during an earthquake. The transfer function amplitude of the top displacement and the elastic base shear force evaluated at the first natural circular frequency of structures are chosen as objective functions. The damper coefficients of the added viscous dampers are taken into consideration as design variables in a planar building frame. Transfer function amplitude of the top displacement and the amplitude of the elastic base shear force at the fundamental natural frequency are minimized under an active constraint on sum of the damper coefficients of the added dampers. According to two specified objective functions, an optimization algorithm based on the ABCA is proposed. The proposed method is verified by a gradient-based algorithm; steepest direction search algorithm (SDSA). The proposed ABCA and the SDSA are applied to find the optimal damper distribution for a nine-storey planar building then the optimal damper allocation obtained from the ABCA is investigated to rehabilitate models of irregular planar buildings. The validity of the proposed method was demonstrated through a time history analysis of the optimal damper designs, which were determined based on the frequency domain using the ABCA. The numerical results of the proposed optimal damper design method show that the use of the ABCA can be a practical and powerful tool to determine the optimal damper allocation in planar building structures.     

Vortex imaging in superconducting films by scanning hall probe microscopy

We have used a low noise Scanning Hall Probe Microscope (SHPM) to study vortex structures in superconducting films. The microscope has high magnetic field (2.9×10^–8T/Hz at 77K) and spatial resolution, 0.85m. Magnetic field profiles of single vortices in High T_c YBa₂Cu₃O_7– thin films have been successfully measured and the microscopic penetration depth of the superconductor has been extracted as a function of temperature. Flux penetration into the superconductor has been imaged in real time (8s/frame).     

Multi-Modal Dialog Scene Detection Using Hidden Markov Models for Content-Based Multimedia Indexing

A class of audio-visual data (fiction entertainment: movies, TV series) is segmented into scenes, which contain dialogs, using a novel hidden Markov model-based (HMM) method. Each shot is classified using both audio track (via classification of speech, silence and music) and visual content (face and location information). The result of this shot-based classification is an audio-visual token to be used by the HMM state diagram to achieve scene analysis. After simulations with circular and left-to-right HMM topologies, it is observed that both are performing very good with multi-modal inputs. Moreover, for circular topology, the comparisons between different training and observation sets show that audio and face information together gives the most consistent results among different observation sets.