Detection of Multiple Blockages in Parallelized Microreactors

In a plant consisting of parallelized microreactors (MRs), the product quality is lowered because of a lack of flow uniformity among them when blockage occurs. It is not practical to install sensors in every MR from the viewpoint of cost when detecting the blocked MRs. In the previous study, the multiple blockage detection (MBD) method using a small number of sensors was proposed, but its performance became low when the number of sensors decreased. Here, the conventional algorithm for MBD is improved by considering the process behavior on blockage occurrence, and the effectiveness of the improved algorithm is demonstrated through a numerical case study. The effects of flow distributor types and sensor types on the MBD performance are numerically investigated.     

Phase fluctuations of cross-polarized signals at 4 GHz in fine weather on earth-space paths

On an earthspace propagation path with the low elevation angle of 10 deg, the phase between co- and crosspolar signals occasionally showed rapid and irregular fluctuations during fine weather. These fluctuations were generally significant during the daytime, and were strongly in phase with the occurrence of the copolar amplitude scintillations. This could be attributed to the combined effects of the crosspolar phase pattern of the receiving antenna and small fluctuations of the angle of arrival of the radiowaves.     

370 W output power GaN-FET amplifier for W-CDMA cellular base stations

A single-ended amplifier using small packaged GaN-FETs exhibits a record 2.14 GHz W-CDMA output power. The amplifier, composed of paralleled 48 mm gate periphery FET die, delivers a peak saturated output power of 371 W with a linear gain of 11.2 dB at a drain voltage of 45 V under 2.14 GHz 3GPP W-CDMA signal input. The output power density (output power/package size) of 1.1 W/mm/sup 2/ is twice as high as that of the existing over 300 W GaAs-FET amplifiers. A low 5 MHz offset ACLR of -36 dBc with a drain efficiency of 24% is also obtained at 8 dB power back off from the saturated output power.     

Formation and Characterization of Ce3ZrO8 Prepared by the Hydrazine Method

A compound denoted as (Ce_0.75Zr_0.25)O₂ (Ce, ZrO₈) is formed near room temperature from cerium and zirconium nitrates using hydrazine monohydrate. It has a cubic unit cell with a = 0.5342 nm. Characterization of powders heated to various temperatures at 10°C/min demonstrates that the specific surface area does not decrease below 20 mVg until >1000°C.     

Extensions of polyacrylic acid ammonium salts in the adsorption layer to fluidize alumina slurries

An average shell volume occupied in the adsorption layer on alumina by a polyacrylic acid ammonium salts molecule (PAA) defined as the average area occupied by an adsorbed PAA on alumina multiplied by the average thickness of the water layer at the limit of thickening, has been calculated from the adsorbed amount of PAA and from the flow points of alumina in the presence of PAA of different molecular weights. A steric effect of the PAA dispersant on the dispersion of alumina resulted in a flow with no yield stress. This was due to the change of the extension of PAA in the adsorption shell from a sphere to an ellipsoid with a long axis which exceeded the effective distance that the van der Waals attraction force reaches at a molecular weight for the PAA of between 10 000–20 000.     

Immunoassay method for the determination of immunoglobulin G using bacterial magnetic particles.

We have developed a novel immunoassay method using bacterial magnetic particles for the determination of immunoglobulin G (IgG). Fluorescein isothiocyanate (FITC) conjugated anti IgG-bacterial magnetic particles were prepared. The fluorescence quenching caused by agglutination of FITC-anti IgG antibody-bacterial magnetic particle conjugates was measured by using a fluorescence spectrophotometer. The aggregates based on specific immunoreaction were separated by a gelatin solution. The aggregation of bacterial magnetic particle conjugates was enhanced by application of a magnetic field. The relative fluorescence intensity correlated linearly with a concentration of IgG in the range 0.5-100 ng/mL.     

Hydroliquefaction of low-sulfur coals using iron carbonyl complexes—Sulfur as catalysts

Hydroliquefaction of low-sulfur Australian coals (Wandoan and Yallourn) was studied using iron carbonyl complexes as catalyst. The addition of Fe(CO)₅ (2.8 wt% Fe of coal) increased coal conversion from 48.6 to 85.2% for Wandoan coal, and from 36.7 to 69.7% for Yallourn coal in 1-methylnaphthalene at 425°C under an initial hydrogen pressure of 50 kg cm^?2. When molecular sulfur was added to iron carbonyls (Fe(CO)₅, Fe₂(CO)₉ and Fe₃(CO)₁₂), higher coal converions ( > 92%) and higher oil yields (>46%) were obtained, along with an increase in the amount of hydrogen transferred to coal from the gas phase (0.2 to 2.8%, d.a.f. coal basis). In the liquefaction studies using a hydrogen donor solvent, tetralin, Fe(CO)₅S catalyst increased the amount of hydrogen absorbed from the gaseous phase and decreased the amount of naphthalene dehydrogenated from tetralin. The direct hydrogen transfer reaction from molecular hydrogen to coal fragment radicals seems to be a major reaction pathway. Organic sulfur compounds, dimethyldisulfide and benzothiophene, and inorganic FeS₂ and NiS were found to be good sulfur sources to Fe(CO)₅. From X-ray diffraction analyses of liquefaction residues, it is concluded that Fe(CO)₅ was converted into pyrrhotite (Fe_1?xS) when sulfur was present, but into Fe₃O₄ in the absence of sulfur.     

Successful eradication of H. pylori in an elderly patient with gastric cancer after effective UFT-E therapy

The patient was a 83-year-old female with 2' T2-type gastric cancer associated with positive H. pylori in the lesser curvature of the stomach. The patient was treated with oral UFT-E alone in a daily dose of 400 mg. The tumor exhibited an O' IIa + IIc-like appearance 4 weeks after the start of administration and became scarred 8 weeks later, revealing marked tumor reduction in a short period of time. At 8 weeks, biopsy showed marked polymorphonuclear cells infiltration of gastric mucosa with no evidence of malignancy. In an attempt to eradicate H. pylori, 30 mg of lansoprazole, 400 mg of clarithromycin, and 2.0 g of ecabet-Na (3.0 g of Gastrom) were administered for 2 weeks. H. pylori was found to have been successfully eradicated, and the inflammatory lesions were no longer visible histologically. UFT-E was highly effective in this patient, and the eradication of H. pylori may contribute to the prevention of cancer recurrence.     

The first specific antibody against cytotoxic polyacetylenic alcohol, panaxynol

Antitumor polyacetylenic alcohol, panaxynol, was isolated and purified from a powder of the root of Panax ginseng C.A. Meyer. Panaxynol inhibited the growth of various kinds of cultured tumor cell lines in a dose-dependent manner. In this paper we demonstrated the first specific antibody production against panaxynol. Anti-panaxynol antibody was elicited in rabbits by immunization with panaxynol hemisuccinate-bovine serum albumin conjugate (panaxynol hemisuccinate-BSA conjugate). An enzyme immunoassay (EIA) for the determination of panaxynol was established using a double-antibody technique. The EIA was highly specific against panaxynol although the antibody showed a minimal cross-reactivity with other types of polyacetylenic alcohol, i.e. panaxydol (12.0%) and panaxytriol (0.77%). Panaxynol at a concentration as low as 6.4 ng/ml can be detected. Using this assay we reconfirmed the rapid consumption of panaxynol by target tumor cells in an in vitro-culture system. The anti-panaxynol antibody may be a valuable tool for studies of the biological properties of polyacetylenic compounds.