Direct Injection of CRISPR/Cas9-Related mRNA into Cytoplasm of Parthenogenetically Activated Porcine Oocytes Causes Frequent Mosaicism for Indel Mutations

Some reports demonstrated successful genome editing in pigs by one-step zygote microinjection of mRNA of CRISPR/Cas9-related components. Given the relatively long gestation periods and the high cost of housing, the establishment of a single blastocyst-based assay for rapid optimization of the above system is required. As a proof-of-concept, we attempted to disrupt a gene (GGTA1) encoding the α-1,3-galactosyltransferase that synthesizes the α-Gal epitope using parthenogenetically activated porcine oocytes. The lack of α-Gal epitope expression can be monitored by staining with fluorescently labeled isolectin BS-I-B₄ (IB4), which binds specifically to the α-Gal epitope. When oocytes were injected with guide RNA specific to GGTA1 together with enhanced green fluorescent protein (EGFP) and human Cas9 mRNAs, 65% (24/37) of the developing blastocysts exhibited green fluorescence, although almost all (96%, 23/24) showed a mosaic fluorescent pattern. Staining with IB4 revealed that the green fluorescent area often had a reduced binding activity to IB4. Of the 16 samples tested, six (five fluorescent and one non-fluorescent blastocysts) had indel mutations, suggesting a correlation between EGFP expression and mutation induction. Furthermore, it is suggested that zygote microinjection of mRNAs might lead to the production of piglets with cells harboring various mutation types.     

Detection of Multiple Blockages in Parallelized Microreactors

In a plant consisting of parallelized microreactors (MRs), the product quality is lowered because of a lack of flow uniformity among them when blockage occurs. It is not practical to install sensors in every MR from the viewpoint of cost when detecting the blocked MRs. In the previous study, the multiple blockage detection (MBD) method using a small number of sensors was proposed, but its performance became low when the number of sensors decreased. Here, the conventional algorithm for MBD is improved by considering the process behavior on blockage occurrence, and the effectiveness of the improved algorithm is demonstrated through a numerical case study. The effects of flow distributor types and sensor types on the MBD performance are numerically investigated.     

Aminoglycosides prevent and dissociate the aggregation of platelets in patients with EDTA-dependent pseudothrombocytopenia

Although EDTA-dependent pseudothrombocytopenia (EDTA-PTCP) is of practical importance because failure to recognize this clinical entity may result in misdiagnosis and subsequent mismanagement of the patients, the pathophysiological nature of EDTA-PTCP remains unknown. To develop an effective way to evaluate the platelet counts in patients with EDTA-PTCP, we introduced aminoglycosides-supplemented anticoagulating agents. When kanamycin was pre-supplemented with EDTA for anticoagulating blood samples from EDTA-PTCP patients there was no significant change in the platelet counts and the morphology of blood cells after 150 min of incubation at room temperature. Furthermore, when kanamycin was added to EDTA-anticoagulated blood samples from EDTA-PTCP patients within 30 min after blood withdrawal, rapid dissociation of platelets without apparent morphological changes of blood cells was observed, and complete blood cell counts as well as the histogram patterns were almost the same as those examined immediately after blood sampling. The dissociation of aggregated platelets was also detected when other antibiotics were used, although it was associated with some extent of morphological changes of blood cells. These findings indicate that the supplementation of aminoglycosides either before or after blood sampling is a useful method for the diagnosis EDTA-PTCP and for the evaluation of platelet counts in patients with EDTA-PTCP.     

Phase fluctuations of cross-polarized signals at 4 GHz in fine weather on earth-space paths

On an earthspace propagation path with the low elevation angle of 10 deg, the phase between co- and crosspolar signals occasionally showed rapid and irregular fluctuations during fine weather. These fluctuations were generally significant during the daytime, and were strongly in phase with the occurrence of the copolar amplitude scintillations. This could be attributed to the combined effects of the crosspolar phase pattern of the receiving antenna and small fluctuations of the angle of arrival of the radiowaves.     

Electric field-assisted and field-depressed segregation of reactive metals to the bonding interface in braze alloy joining

Segregation of reactive metals at the bonding interface has been observed in various ceramic and/or metal joints bonded with reactive metal-bearing braze alloys. When a d.c. of 20 mAcm⁻² is applied to the ceramic/braze/ceramic system at a brazing temperature of, say, 1373 K, the electric field assists the segregation at the braze-ceramic interface on the cathode side and suppresses the segregation at the interface on the anode side. This may imply that reactive metal atoms in the braze can migrate as a cation. E.m.f. measurement on the ceramic (AIN or ZrB₂)-metal foil systems with increasing temperature shows that a negative e.m.f. to the ceramic pole appears from about 900 K for AIN and from 500 K for ZrB₂, as does the thermally stimulated current in polymers. These temperatures coincide well with those where the electrical conductivity of AIN and ZrB₂, respectively, begins to increase with increasing temperature. Therefore, it is considered that the polarization of the ceramics may take place and assist the migration, and consequently segregation, of reactive metals in braze alloys to the braze-ceramic interface during brazing.     

Formation and Characterization of Ce3ZrO8 Prepared by the Hydrazine Method

A compound denoted as (Ce_0.75Zr_0.25)O₂ (Ce, ZrO₈) is formed near room temperature from cerium and zirconium nitrates using hydrazine monohydrate. It has a cubic unit cell with a = 0.5342 nm. Characterization of powders heated to various temperatures at 10°C/min demonstrates that the specific surface area does not decrease below 20 mVg until >1000°C.     

Structure and mechanical properties of polyethylene-fullerene composites

The microhardness of films of fullerene-polyethylene composites prepared by gelation from semidilute solution, using ultrahigh molecular weight polyethylene (PE) (6×10⁶), has been determined. The composite materials were characterized by optical microscopy and X-ray diffraction techniques. The microhardness of the films is shown to increase notably with the concentration of fullerene particles within the films. In addition, a substantial hardening of the composites is obtained after annealing the materials at high temperatures (T _a=130 °C) and long annealing times (t _a=10⁵s). The hardening of the composites with annealing temperature has been identified with the thickening of the PE crystalline lamellae. Comparison of X-ray scattering data and the microhardness values upon annealing leads to the conclusion of phase separation of C₆₀ molecules from the polyethylene crystals within the material. The temperature dependence is discussed in terms of the independent contribution of the PE matrix of the C₆₀ aggregates to the hardness value.     

Effect of surfactants on phenol removal by the method of polymerization and precipitation catalysed by Coprinus cinereus peroxidase

The removal of phenol by peroxidase‐catalysed polymerization was examined using Coprinus cinereus peroxidase in the presence of surfactants. The non‐ionic surfactants with poly(oxyethene) residues, Triton X‐100, Triton X‐405 and Tween 20, enhanced the phenol removal efficiency at a level similar to high relative molecular mass poly(ethylene glycol) (relative molecular mass 3000). Although the improvement in the removal efficiency was less than that of Triton X‐100, Span 20, sodium lauryl sulfate (SDS) and lauryl trimethylammonium bromide (DTAB) also enhanced the removal efficiency. The requirement of the enzyme for almost 100% removal of 100 mg dm^?3 phenol decreased to one‐fourth by the addition of 30 mg dm^?3 Triton X‐100. Triton X‐100, Triton X‐405, Tween 20 and DTAB could reactivate the enzyme precipitated with the phenol polymer, leading to the restarting of the phenol removal reaction. Copyright © 2003 Society of Chemical Industry     

0.5-μm 3.3-V BiCMOS standard cells with 32-kilobyte cache andten-port register file

BiCMOS standard cell macros, including a 0.5-W 3-ns register file, a 0.6-W 5-ns 32-kbyte cache, a 0.2-W 3-ns table look-aside buffer (TLB), and a 0.1-W 3-ns adder, are designed with a 0.5-μm BiCMOS technology. A supply voltage of 3.3 V is used to achieve low power consumption. Several BiCMOS/CMOS circuits, such as a self-aligned threshold inverter (SATI) sense amplifier and an ECL HIT logic are used to realize high-speed operation at the low supply voltage. The performance of the BiCMOS macros is verified using a fabricated test chip