A practical Equivalent Electrical Circuit model for Proton Exchange Membrane Fuel Cell (PEMFC) systems

An alternative Equivalent Electrical Circuit for Proton Exchange Membrane Fuel Cells is modelled in this study. Both I–V characteristics and H₂ consumptions corresponding to generated power under load and no-load conditions are investigated. For this purpose, H₂ consumptions and I–V characteristics of three different sized PEMFCs are tested. There is a very good harmony between the model results and measured values (relative error %0.7, %6.4 and %2.5 for FC-A, FC-B and FC-C respectively). In the proposed model current passes only on parallel resistance and not on serial resistance at no-load condition. Thus, a FC with higher parallel resistance should be preferred. Another key output of this study is that based on the proposed model, performance comparison of FCs can be performed with the parameters defined in this work. Proposals made in this study can easily be used for performance analysis of FCs under for both steady state and transient analysis.     

Effect of Boronizing on Operating Stability of Steel AISI 304L under Erosion Impact of Hard Particles

Metal Science and Heat Treatment - The effect of solid boronizing at 950°C for 2 and 4 h on the phase composition, microstructure, hardness and abrasive wear of steel AISI 304L is studied...     

Automated classification of simulated wind field patterns from multiphysics ensemble forecasts

In this study, we have proposed an automated classification approach to identify meaningful patterns in wind field data. Utilizing an extensive simulated wind database, we have demonstrated that the proposed approach can identify low‐level jets, near‐uniform profiles, and other patterns in a reliable manner. We have studied the dependence of these wind profile patterns on locations (eg, offshore vs onshore), seasons, and diurnal cycles. Furthermore, we have found that the probability distributions of some of the patterns depend on the underlying planetary boundary layer schemes in a significant way. The future potential of the proposed approach in wind resource assessment and, more generally, in mesoscale model parameterization improvement is touched upon in this paper.     

Partitioning of predominant lipophilic bioactives (squalene, α-tocopherol and β-sitosterol) during olive oil processing

The partitioning of predominant lipophilic olive bioactives (squalene, β-sitosterol and α-tocopherol) in olive oil processing was studied for the first time using common integrated olive milling plant. 7% of the oil and 5% of the squalene present in the olives was lost in the last pomace. β-sitosterol and α-tocopherol, which are mainly concentrated in the seed of the olive fruit, was recovered in virgin olive oil to a lesser extent (66%, 67%) while 10% were lost in last pomace. Thus, the loss of β-sitosterol and α-tocopherol was higher than that of squalene and oil, due to nonrecovered bound forms. 19% of the α-tocopherol and 21% of the β-sitosterol loss was unaccounted for, which can be attributed to degradation of α-tocopherol and incomplete recovery of sterols from the olive and pomace matrices. This study provides a basis for process development studies.     

Second harmonic generation from a ferroelectric film

We derive an expression for transmittivity (T_SHG) of second harmonic generation (SHG) signals from a ferroelectric (FE) film. Intensities of up and down fields in the medium are investigated in relation to T_SHG. The derivations are made based on undepletion of input fields and nonlinear wave equation derived from the Maxwell equations. We present two cases: film without mirrors and with partial mirrors. Expressions for the newly derived nonlinear susceptibility coefficients of SHG for real crystal symmetry [J. Opt. Soc. Am. B 19 (2002) 2007] are used to get more realistic results. Variations in T_SHG with respect to film thickness are illustrated.     

Synthesis of heterocyclic metal complexes and their evaluation as marine antifoulants

4-Amino-3-thio-1,24-triazolidine (L₁) and 4-amino-5-thio-1,3,4-thiadiazole (L_II) as well as their metal complexes of the general formulae ML_I·2H₂O and ML_IICl (M; Pb(II), Cd(II) and Zn(II)) were prepared. With Sn(II), we obtained Sn(L_I)₂·2H₂O and SnL_IICl, respectively. The structures of the compounds were identified through elemental analysis, and IR and UV spectra measurements, in addition to thermal analysis in case of the metal complexes. The antifouling properties of the compounds were tested by their incorporation into paint formulations which were applied to PVC substrates and tested in water from Alexandria western harbour. When the compounds were added at 17·5% by volume, the coated panels were fouled after 3 months of immersion. The addition of 6·7% by volume of tributyltin oxide to 15·8% of the prepared compounds in one formulation elevated the paint efficiency and prevented fouling for 11 months. Paint containing solely tributyltin oxide at the same concentration was inactive against algae.     

Optimal design of elastic beams with segmentwise constant height in the case of dynamic loading

A shape optimization method for elastic beams with segmentwise constant height is proposed. The ends of the beam are simply supported, clamped or free. Two problems are discussed; (i) a beam is loaded by lateral pressure, (ii) a beam is struck by an attached mass. External loads and volume of the beam are prescribed and the deflection in a given cross-section is to be minimized. For solving this problem, the deflections are expanded into a Fourier series by eigenfunctions. Numerical results are given for two-, three- and four-stepped beams.     

Über die Anwendung von Ionensensitiven Feldeffekttransistoren zur Untersuchung von Korrosionsvorgängen

On the application of ion sensitive field-effect transistors for the investigation of corrosion phenomena Ion sensitive field-effect transistors (ISFET) are chemical sensors based on semiconductor technology. They exhibit small dimensions, a plane measuring surface and have short response times. Thus, they are very suitable for the determination of local changes of the pH value at electrochemical corrosion studies. The described in this paper experimental set-up allows in situ measurements of the pH value by means of ISFET sensors in amounts of liquids below 1 mm³; the active surface area of the material under test may be below 1 mm². In model tests preferably changes of the pH value of dist. water due to the corrosion of steel St 38 have been investigated. After an initial short-time rise caused by oxygen reduction a decay of the pH value to pH = 3 ?4 was obseved. Furthermore, ISFET sensors have been used as a potential probe for electrochemical polarization measurements in low conductive media. It was shown, that the dynamic behaviour of potentiostatic control circuits may be influenced favourably by the low output resistance of the ISFET.     

Capacitated Clustering Problems by Hybrid Simulated Annealing and Tabu Search

The capacitated clustering problem (CCP) is the problem in which a given set of weighted objects is to be partitioned into clusters so that the total weight of objects in each cluster is less than a given value (cluster ‘capacity’). The objective is to minimize the total scatter of objects from the ‘centre’ of the cluster to which they have been allocated. A simple constructive heuristic, a R-interchange generation mechanism, a hybrid simulated annealing (SA) and tabu search (TS) algorithm which has computationally desirable features using a new non-monotonic cooling schedule, are developed. A classification of the existing SA cooling schedules is presented. The effects on the final solution quality of the initial solutions, the cooling schedule parameters and the neighbourhood search strategies are investigated. Computational results on randomly generated problems with size ranging from 50 to 100 customers indicate that the hybrid SA/TS algorithm out-performs previous simulated annealing algorithms, a simple tabu search and local descent algorithms.