Prediction of rubber stability by accelerated aging test modeling

This study was devoted to the prediction of polymer material aging. The prediction of the shelf time of tire rubber is used as an example in this article. The main steps of the whole procedure are described. They are the design of the experiment, accelerated aging testing, the construction of a multiresponse mathematical model and parameter estimation, and the extrapolation of the model in real‐life settings. The main pitfalls were deduced, and techniques to overcome these pitfalls are described. Novel methods of data modeling, such as evolutionary design of experiment and successive Bayesian estimation, were used. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1275–1284, 2005     

Using ELP Repeats as a Scaffold for De Novo Construction of Gadolinium-Binding Domains within Multifunctional Recombinant Proteins for Targeted Delivery of Gadolinium to Tumour Cells

Three artificial proteins that bind the gadolinium ion (Gd³⁺) with tumour-specific ligands were de novo engineered and tested as candidate drugs for binary radiotherapy (BRT) and contrast agents for magnetic resonance imaging (MRI). Gd³⁺-binding modules were derived from calmodulin. They were joined with elastin-like polypeptide (ELP) repeats from human elastin to form the four-centre Gd³⁺-binding domain (4MBS-domain) that further was combined with F3 peptide (a ligand of nucleolin, a tumour marker) to form the F3-W4 block. The F3-W4 block was taken alone (E2-13W4 protein), as two repeats (E1-W8) and as three repeats (E1-W12). Each protein was supplemented with three copies of the RGD motif (a ligand of integrin αvβ3) and green fluorescent protein (GFP). In contrast to Magnevist (a Gd-containing contrast agent), the proteins exhibited three to four times higher accumulation in U87MG glioma and A375 melanoma cell lines than in normal fibroblasts. The proteins remained for >24 h in tumours induced by Ca755 adenocarcinoma in C57BL/6 mice. They exhibited stability towards blood proteases and only accumulated in the liver and kidney. The technological advantages of using the engineered proteins as a basis for developing efficient and non-toxic agents for early diagnosis of tumours by MRI as well as part of BRT were demonstrated.     

The effect of mechanical recycling on the microstructure and properties of PA66 composites reinforced with carbon fibers

This article aims to prepare by injection molding recycled polymeric composites based on PA66 reinforced with short carbon fibers after artificial aging for applications in the automotive field. The aging cycles involves the combined action of UV radiation, moisture, and temperature in order to simulate the common outdoor conditions. The 100% recycled composites are obtained by the regranulation of the aged specimens followed by the remelting and re‐injection molding. The study is focused on the comparison between the mechanical behavior and the microstructure of the composites before and after mechanical recycling. The results of mechanical, thermal, and morphological investigations reveal that the recycling process had no significant effect on the final properties and microstructure of the recycled composites. Therefore the recycled PA66CF30 composites could be successfully used for structural or semi‐structural automotive applications guaranteeing good final performances and advantages from the environmental point of view. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42275.     

Environmentally Benign Oxidation of Alkylphenols to p-Benzoquinones: A Comparative Study of Various Ti-Containing Catalysts

Catalytic properties of Ti-containing porous solids were compared in the oxidation of 2,3,6-trimethylphenol (TMP) with H₂O₂ to produce 2,3,5-trimethyl-1,4-benzoquinone (TMBQ, vitamin E key intermediate). Mesoporous titanium–silicates with di(oligo)nuclear Ti centers, metal–organic framework MIL-125 and amorphous TiO₂ demonstrated 100 % selectivity toward TMBQ. Titanium–silicates prepared by evaporation-induced self-assembly revealed superior performance in terms of product yield and catalyst reusability.

     

Identification and chemical characterization of specific organic indicators in the effluents from chemical production sites

The structural diversity of the wastewater composition was described by the use of detailed non-target screening analyses of industrial effluents from chemical production sites. Determination of the indicative organic compounds acting as potential molecular indicators for industrial emissions from chemical production industries has been possible due to (i) detailed characterisation of industrial contaminants and identification of compounds with high source specificity, (ii) quantitative determination of the organic constituents in the industrial effluents and (iii) the review of their industrial applications. The determination of potential site-specific markers and industrial molecular indicators corresponding to certain production processes (production of starting materials for manufacturing paper and printing inks, powder coatings as well as epichlorohydrin production) was performed in this work.The results of this study allowed significant contributions to the chemical characterisation of industrial contaminants and isolation of indicators that can act as representatives of industrial effluents in the aquatic environment.     

Titanium-monosubstituted polyoxometalates: relation between homogeneous and heterogeneous Ti-single-site-based catalysis

The similarity in the catalytic behaviour of titanium-monosubstituted Keggin type polyoxometalates [PTi(L)W₁₁O₃₉]^n- (Ti-POMs) and heterogeneous titanium single-site catalysts in selective oxidations with H₂O₂ is demonstrated. Recent achievements in the application of Ti-POMs as soluble molecular models for studying mechanisms of oxidation catalysis are reviewed.     

Removing of light hydrocarbons from gas mixtures using polymeric composite membranes based on poly(1-trimethylsilylpropyne)

Usually the methodologies used to analyse the feasibility of water reuse projects are focused on the internal costs. The aim of this paper is to show a methodology to assess the feasibility of a water reuse project taking into account not just the internal impact, but also the external impact (environmental and social, for example) and the opportunity cost derived from the project. Internal benefit is obtained from the difference between internal income and internal costs. Internal income is obtained by multiplying the selling price of reclaimed water and the volume obtained. Internal costs are made up of the sum of investment costs, operating costs, financial costs and taxes. While some of these factors identified can be calculated directly in terms of money, biophysical and social aspects demand the definition of units of measurement. In order to homogenize results, an annual reference is proposed. A monetary value can be obtained from the calculation of each impact. However, there are a series of externalities for which no explicit market exists. In these cases economic valuation methods are used, based on hypothetical scenarios or patterns observed in related markets.     

Cytotoxic Potential of a-Azepano- and 3-Amino-3,4-SeCo-Triterpenoids

Semi-synthetic triterpenoids, holding an amino substituted seven-membered A-ring (azepano-ring), which could be synthesized from triterpenic oximes through a Beckmann type rearrangement followed by a reduction of lactame fragment, are considered to be novel promising agents exhibiting anti-microbial, alpha-glucosidase, and butyrylcholinesterase inhibitory activities. In this study, in an attempt to develop new antitumor candidates, a series of A-ring azepano- and 3-amino-3,4-seco-derivatives of betulin, oleanolic, ursolic, and glycyrrhetinic acids were evaluated for their cytotoxic activity against five human cancer cell lines and non-malignant mouse fibroblasts by means of a colorimetric sulforhodamine assay. Azepanoallobetulinic acid amide derivative 11 was the most cytotoxic compound of this series but showed little selectivity between the different human tumor cell lines. Flow cytometry experiments showed compound 11 to act mainly by apoptosis (44.3%) and late apoptosis (21.4%). The compounds were further screened at the National Cancer Institute towards a panel of 60 cancer cell lines. It was found that compounds 3, 4, 7, 8, 9, 11, 15, 16, 19, and 20 showed growth inhibitory (GI₅₀) against the most sensitive cell lines at submicromolar concentrations (0.20–0.94 μM), and their cytotoxic activity (LC₅₀) was also high (1–6 μM). Derivatives 3, 8, 11, 15, and 16 demonstrated a certain selectivity profile at GI₅₀ level from 5.16 to 9.56 towards K-562, CCRF-CEM, HL-60(TB), and RPMI-8226 (Leukemia), HT29 (Colon cancer), and OVCAR-4 (Ovarian cancer) cell lines. Selectivity indexes of azepanoerythrodiol 3 at TGI level ranged from 5.93 (CNS cancer cell lines SF-539, SNB-19 and SNB-75) to 14.89 for HCT-116 (colon cancer) with SI 9.56 at GI₅₀ level for the leukemia cell line K-562. The present study highlighted the importance of A-azepano-ring in the triterpenic core for the development of novel antitumor agents, and a future aim to increase the selectivity profile will thus lie in the area of modifications of azepano-triterpenic acids at their carboxyl group.     

Antimicrobial and Amyloidogenic Activity of Peptides. Can Antimicrobial Peptides Be Used against SARS-CoV-2?

At present, much attention is paid to the use of antimicrobial peptides (AMPs) of natural and artificial origin to combat pathogens. AMPs have several points that determine their biological activity. We analyzed the structural properties of AMPs, as well as described their mechanism of action and impact on pathogenic bacteria and viruses. Recently published data on the development of new AMP drugs based on a combination of molecular design and genetic engineering approaches are presented. In this article, we have focused on information on the amyloidogenic properties of AMP. This review examines AMP development strategies from the perspective of the current high prevalence of antibiotic-resistant bacteria, and the potential prospects and challenges of using AMPs against infection caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2).