Antimicrobial and antifungal agents derived from clay minerals

A silver chelate of 2-(4-thiazolyl)-benzimidazole, dodecyltrimethylammonium cation and hexadecylpyridinium cation have been intercalated between montmorillonite, and the resulting samples were subjected to examination of their thermostabilities by thermogravimetry and carbon dioxide evolution analysis up to 500 °C in air. The degradation behaviour of the intercalant was significantly changed by intercalating between the montmorillonite layers. Two quaternary ammonium cations were released from the montmorillonite both at the same temperature, which was higher than those for the quaternary ammonium cations themselves. This relation was also observed in the case of 2-(4-thiazolyl)-benzimidazole. The improvement of the thermostability after intercalation can be attributed to the bonding between the intercalant and the host montmorillonite layers.     

Is it possible to differentiate between choledochal cyst and congenital biliary atresia (type I cyst) by antenatal ultrasonography?

Both choledochal cyst and congenital biliary atresia (type I cyst) may share the same ultrasonographic pattern. We report 2 cases which were shown to have cystic structures on the upper abdomen by antenatal ultrasonography. The size of the choledochal cyst found at 24 weeks' gestation increased steadily as gestational age advanced. But the size of the cyst in congenital biliary atresia found at 29 weeks' gestation remained unchanged throughout the remaining pregnancy. Cyst enlargement, therefore, may suggest the possibility of a choledochal cyst.     

Protein modification by a Maillard reaction intermediate methylglyoxal. Immunochemical detection of fluorescent 5-methylimidazolone derivatives in vivo

Methylglyoxal (MG), an endogenous metabolite that increases in diabetes, is a common intermediate in nonenzymatic glycation (Maillard reaction) in vivo. Here we describe the immunochemical approach to the detection of MG adducts in proteins in vitro and in atherosclerotic lesions of human aorta in vivo. The reaction of protein (bovine serum albumin) with MG led to selective loss of arginine and lysine residues, accompanied by the formation of 5-methylimidazolone (N delta-(5-methylimidazolon-2-yl)ornithine) and imidazolysine (1,3-di-lysino-4-methylimidazole) derivatives, respectively. The anti-5-methylimidazolone antibody was prepared by immunizing rabbits with a MG-keyhole limpet hemocyanin conjugate and purifying the serum on an affinity gel prepared by covalent attachment of the 5-methylimidazolone derivative. The antibody cross-reacted with the proteins treated with not only MG but trioses, such as hydroxyacetone, dihydroxyacetone, and glyceraldehyde. The immunohistochemical analysis revealed that atherosclerotic lesions of human aorta contained 5-methylimidazolone derivatives whose distributions were identical to those of advanced glycation end products (AGEs) detected by the anti-AGE antibody.     

Carbon nanotubes prepared from three-layered copolymer microspheres of acrylonitrile and methylmethacrylate

Carbon nanotubes (CNTs) were synthesized from fine three-layered copolymer microspheres using the polymer blend technique. Diameter of PMMA core/Poly(AN-co-MMA) shell-1/PMMA shell-2 microspheres, prepared by a radical soap-free emulsion polymerization of methylmethacrylate (MMA) and acrylonitrile (AN), was between 400 nm and 500 nm. Microspheres were subjected to melt-spinning at 305 °C, stabilizing in oxygen at 220 °C for 4 h, and finally carbonizing at 1000 °C for 30 min. FE-SEM study of carbonized sample revealed the presence of CNTs arrays on carbon blocks. Similar arrays were observed in a comparative CNTs sample prepared from three-layered microspheres with the pure PAN shells-1 layers. HRTEM showed that the CNTs derived from copolymer microspheres had different structure when compared to the control sample, i.e. CNTs often adhered to each other and contained the internal compartments. The insufficient PMMA shell-2 coating of copolymer microspheres is believed to be a reason for CNTs adhesion. The possible mechanisms of the carbon block formation and the adhesion of CNTs are introduced.     

Release of salicylic acid through poly(vinyl alcohol)/poly(vinyl pyrrolidone) and poly(vinyl alcohol‐g‐N‐vinyl‐2‐pyrrolidone) membranes

A controlled release profile of salicylic acid (SA) for transdermal administration has been developed. Poly (vinyl alcohol) (PVA) and Poly(vinyl alcohol)/Poly(vinyl pyrrolidone) (PVP) blended preparations were used to prepare the membranes by solvent‐casting technique. The release of the drug from the membranes was evaluated at in vitro conditions. The effects of PVA/PVP (v/v) ratio, pH, SA concentration and temperature were investigated. 60/40 (v/v) PVA/PVP ratio was found to be the best ratio for the SA release. Increase in pH and temperature was observed to increase the transport of SA. Instead of blending PVA with PVP, N‐Vinyl‐2‐pyrrolidone (VP) was grafted onto the PVA and the delivery performance for SA was compared with that of the blended PVA/PVP membranes. Grafted membranes gave higher transport percentages than the blended membranes. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:1244–1253, 2006     

Preparation and characterization of PVA/OMMT composites

In this study, polyvinyl alcohol/organically modified montmorillonite (HDA/MMT; organoclay) composite was prepared for the intercalation processes. Firstly, the rheological behavior of aqueous montmorillonite dispersions was investigated as a function of solid content. Hexadecylamine (HDA) was added to the montmorillonite dispersion (2%, w/w) in different concentrations in the range of 5 × 10^?4 – 9 × 10^?3 mmol/L. The basal spacing of the organoclay (OMMT) was studied by X‐ray diffraction. The FTIR spectra are obtained from the modified montmorillonite products, which revealed the characteristic absorbencies after treatment with HDA. HDA/MMT/PVA composite, which was produced by the reaction of 1 wt % PVA solution with organoclay complex, is characterized by the rheology, electrokinetic, XRD, FTIR, and SEM techniques. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:2315–2323, 2006     

Carbonization and graphitization of poly-p-phenylene sulphide (PPS) film

Oriented poly-p-phenylene sulphide (PPS) films (thickness 12 and 75 m) and PPS powder were carbonized/graphitized after stabilizing by oxidation, in order to examine the effect of sulphur on graphitizability of the resulting carbons. The films and the powder resulted in carbons with a high and a low graphitizability respectively. An in-plane oriented structure of the PPS film was the most predominant factor to lead to a high graphitizability, and sulphur in the precursor did not lower the graphitizability when it was subjected to solid-phase carbonization. These phenomena are discussed on the basis of analytical data.