Graft copolymerization onto rubber. VII. Graft copolymerization of methyl methacrylate onto rubber using potassium peroxydisulfate catalyzed by silver ion

The graft copolymerization of methyl methacrylate onto natural rubber (NR) was carried out varying the concentration of monomer, initiator, thiourea, and silver nitrate over a wide range. The grafting reaction was temperature-dependent. From the Arrhenius plot, the overall energy of activation was computed. A suitable reaction scheme and rate expression for the rate of polymerization was suggested.     

Fabrication of Functional Nanofibrous Ammonia Sensor

A nanofibrous sensor for ammonia gas is fabricated by electrospinning the composite of poly(diphenylamine) (PDPA) with poly(methyl methacrylate) (PMMA) onto the patterned interdigit electrode. The composite electrospun membrane shows interconnected fibrous morphology. Functional groups in PDPA and the high active surface area of the fibrous membrane make the device detect a lower concentration of ammonia with a good reproducibility. The sensing capability of the device is studied by monitoring the changes in resistance of the membrane with different concentrations of ammonia. The changes in resistance of the membrane shows linearity with the concentration of ammonia in the limit of 10 and 300 ppm. UV-visible spectroscopy reveals the mechanism of sensing ammonia by the membrane.     

Plastic Limit, Liquid Limit and Undrained Shear Strength of Soil—Reappraisal

The concept that plasticity index of soils can be defined as a range of water contents producing a 100-fold variation in undrained shear strength has been experimentally verified with the help of a large number of tests on soils of diverse nature. This has led to the redefinition of the plastic limit as the water content at which undrained shear strength is around 170 kN/m2. Undrained shear strength of a soil at the liquid limit can be considered to be around 1.7 kN/m2. Accordingly, both the liquid limit and the plastic limit have been determined in the present work by a single consistent method, i.e., the Swedish fall cone method. The undrained shear strength-water content relationship has been found to be log-linear for a wide range of water contents beginning from lower than the plastic limit to higher than the liquid limit. This resulted in the formulation of an expression for predicting undrained shear strength of a remolded soil at any water content based solely on its liquid limit and plastic limit.     

Cuprates intermediate between one and two dimensions

The key elements in all known cuprate superconductors are lightly doped CuO_i-planes. Recently a new homologous series of compounds Sr_n–1Cu_n+1O_2n have been reported in which the planes contain a parallel array of line defects which form a trellis lattice with ladder-segments of the square lattice weakly coupled through triangular line defects. The width of the ladder segments is determined by the parameter n and varies from single chains to arbitrarily wide ladders. The magnetic properties of undoped compounds will be dominated by the properties of the ladders. Heisenberg s = 1/2 ladders can have a spin liquid groundstate with a spin gap if the number of rungs is odd so that a short range RVB groundstate is predicted for such trellis lattices. Using a t-J model to describe the doped material leads to the prediction of a d-wave RVB superconducting groundstate with a large spin gap.     

Efficiency,skin strength and sorptivity of fly ash concretes

Four grades of concrete with and without fly ash were devised and tested for compressive strength. The concretes were cured in three different curing regimes. The skin strength of concretes under inadequate curing was calculated by assuming a linear model for the variation of strength, and the strength difference between cement and fly ash concretes has been worked out. The skin strength of cement concretes was found to be higher than that of fly ash concretes. The test results were found to be affected by the size of the test specimen, when proper curing was not provided. The difference in sorptivity of fly ash and cement concretes cured for four days and not provided with any initial curing has been included. For all grades of concrete, the sorptivity of fly ash concrete was found to be marginally higher. The difference in sorptivity between fly ash and cement concretes was observed to increase as the strength of the mix decreased. The effect of initial curing was found to be highly significant. The sorptivity of samples with no curing was twice as much as those with four days initial curing. Besides the material properties, the age and strength of a fly ash concrete were also found to be important factors in determining the cementing efficiency of the fly ash.     

Polymers from renewable resources. I. Castor oil-based interpenetrating polymer networks: Thermal and mechanical properties

A number of polyurethanes (PUs) were synthesized by reacting castor oil with toluene-2,4-diisocyanate and hexamethylene diisocyanate and varying the NCO/OH ratio. All these polyurethanes were reacted with some acrylic monomers like ethyl acrylate, n-butyl acrylate, ethyl methacrylate, and butyl methacrylate using a crosslinker ethylene glycol dimethyl-acrylate and benzoyl peroxide as the initiator. The physicochemical properties of interpenetrating polymer networks (IPNs) are reported. Thermogravimetric analysis was used to study the thermal behavior of IPNs and the evaluation of kinetic parameters. Degradation mechanism has also been investigated. Some of the mechanical properties viz. tensile strength, shore-A hardness, elongation at break, etc. are also reported. © 1993 John Wiley & Sons, Inc.     

Grafting vinyl monomers onto silk fibers. II. Graft copolymerization of methyl methacrylate onto silk by hexavalent chromium ion

The feasibility of chromium(VI) to induce graft polymerization of methyl methacrylate onto silk was investigated. The rate of grafting was determined by varying monomer concentration, chromium(VI) concentration, temperature, acidity of the medium, nature of the silk, reaction medium, and redox system. The graft yield increased with increasing monomer concentration up to 0.65M, and with further increase of monomer the graft yield decreased. The graft yield increased with increasing chromium(VI) concentration. The grafting is considerably influenced by chemical modification of silk prior to grafting. The graft yield is influenced by thiourea concentration, decreasing with increasing thiourea concentration. The effect of certain inorganic salts and anionic surfactants on the rate of grafting was investigated.     

Synergic influence of a surfactant and ultrasonication on the preparation of soluble,conducting polydiphenylamine/silica‐nanoparticle composites

Conducting polydiphenylamine was used to encapsulate silica nanoparticles through the oxidative polymerization of diphenylamine in the presence of ultrasonic irradiation. The polymerization was performed in the presence of sodium lauryl sulfate as a surfactant. Experiments performed in the absence of ultrasound clearly demonstrated that the application of ultrasonication played multiple roles in the preparation of a composite of polydiphenylamine with silica nanoparticles. Ultrasonication dispersed the silica nanoparticles, converted sodium lauryl sulfate to lauryl alcohol, and augmented the dispersion of the silica‐nanoparticle/polydiphenylamine composite in an organic medium. Silica‐nanoparticle/polydiphenylamine composites were also prepared in the absence of ultrasound and/or sodium lauryl sulfate. The silica‐nanoparticle/polydiphenylamine composites were characterized with Fourier trans form infrared spectroscopy, ultraviolet–visible/near‐infrared spectroscopy, and thermogravimetric analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3912–3918, 2006     

Utilization of flyash as filler for polybutyleneterepthalate‐toughened epoxy resin

Flyash, a waste product generated in large quantities in thermal power plants, has been posing problems of disposal. The purpose of the present work was to make a meaningful utilization of flyash as filler in neat epoxy resin matrix and 2% Polybutyleneterepthalate (PBT)/epoxy blend matrix. For this purpose, the tensile, flexural, compression, impact, chemical resistance, and water absorption properties were studied. Composites were made with varying proportion of flyash in epoxy resin and 2% PBT/epoxy blend matrix. Tensile, flexural, and compression properties were measured on a computerized universal testing machine, according to ASTM procedures. Impact strength was determined using izod impact tester for un‐notched specimens. PBT (2%)/epoxy blend matrix composites showed improved mechanical properties over neat epoxy flyash composites. All the composites were found to have good chemical resistance toward acids, solvents, and alkalies. These composites showed better water resistance over neat epoxy flyash composites. POLYM. ENG. SCI. 46:946–953, 2006. © 2006 Society of Plastics Engineers     

Peroxydisulfate initiated graft copolymerization of aniline onto poly(propylene) fiber—A kinetic approach

A novel method for the preparation of electrically conducting fibers through chemical grafting of electrically conducting polymer onto poly(propylene) (PP) fiber is described. The graft copolymerization of aniline (ANI) was performed in aqueous acidic medium by using a chemical oxidant such as peroxydisulfate (PDS). Grafting occurred with simultaneous homopolymer formation. The content of polyaniline in the backbone fiber was found to vary by varying [monomer], [initiator], and amount of PP fiber. Various graft parameters such as rate of grafting (R_g), % grafting, and % grafting efficiency were evaluated. The rate of homopolymerization (R_h) was also determined. Both R_h and R_g showed first‐order dependency on [ANI], [PDS], and amount of PP fiber variation. The chemical grafting was confirmed by use of cyclic voltammetry and conductivity measurements. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3827–3834, 2003