Ultrafast Electron–Phonon Coupling at Metal-Dielectric Interface

Energy transfer from photo-excited electrons in a metal thin film to the dielectric substrate is important for understanding the ultrafast heat transfer process across the two materials. Substantial research has been conducted to investigate heat transfer in a metal-dielectric structure. In this work, a two-temperature model in metal was used to analyze the interface electron and dielectric substrate coupling. An improved temperature and wavelength-dependent Drude–Lorentz model was implemented to interpret the signals obtained in optical measurements. Ultrafast pump-and-probe measurements on Au-Si samples were carried out, where the probe photon energy was chosen to be close to the interband transition threshold of gold to minimize the influence of non-equilibrium electrons on the optical response and maximize the thermal modulation to the optical reflectance. Electron-substrate interface thermal conductance at different pump laser fluences was obtained, and was found to increase with the interface temperature.     

Graft copolymerization onto rubber. VII. Graft copolymerization of methyl methacrylate onto rubber using potassium peroxydisulfate catalyzed by silver ion

The graft copolymerization of methyl methacrylate onto natural rubber (NR) was carried out varying the concentration of monomer, initiator, thiourea, and silver nitrate over a wide range. The grafting reaction was temperature-dependent. From the Arrhenius plot, the overall energy of activation was computed. A suitable reaction scheme and rate expression for the rate of polymerization was suggested.     

Plastic Limit, Liquid Limit and Undrained Shear Strength of Soil—Reappraisal

The concept that plasticity index of soils can be defined as a range of water contents producing a 100-fold variation in undrained shear strength has been experimentally verified with the help of a large number of tests on soils of diverse nature. This has led to the redefinition of the plastic limit as the water content at which undrained shear strength is around 170 kN/m2. Undrained shear strength of a soil at the liquid limit can be considered to be around 1.7 kN/m2. Accordingly, both the liquid limit and the plastic limit have been determined in the present work by a single consistent method, i.e., the Swedish fall cone method. The undrained shear strength-water content relationship has been found to be log-linear for a wide range of water contents beginning from lower than the plastic limit to higher than the liquid limit. This resulted in the formulation of an expression for predicting undrained shear strength of a remolded soil at any water content based solely on its liquid limit and plastic limit.     

CATALYTIC CRACKING OF TARS FROM COAL DEVOLATILIZATION

A set of runs were performed on the catalytic and thermal cracking of the tars present fn the gasifier off-gas stream; the cracking referred to here Js essentially hydrocracking, in view of the considerable amount of hydrogen being present in the gas stream. The catalyst evaluated for tar cracking was a commercial cobalt-molybdenum catalyst, suppported on γ-Al₂O₃(Katalco-477). It was observed that there was a decrease in the amount of tar obtained with the cracking unit on-line with the gasifier; the tars were cracked to gaseous products in the presence of catalyst. Furthermore, it appeared that higher ring structures were transformed to less heavier components; thus cracking could become beneficial in downstream processing of the gas stream coming out of a gasifier.     

Dual frequency miniature microstrip antenna

A single-feed dual frequency compact microstrip antenna with a shorting pin is described. This new antenna configuration gives a large variation in frequency ratio of the two operating frequencies, without increasing the overall size of the antenna     

Microstructural effects on the tensile properties and deformation behavior of a Ti-48Al gamma titanium aluminide

The effects of microstructure on the tensile properties and deformation behavior of a binary Ti-48Al gamma titanium aluminide were studied. Tensile-mechanical properties of samples with microstructures ranging from near γ to duplex to fine grained, near- and fully-lamellar were determined at a range of temperatures, and the deformation structures in these characterized by transmission electron microscopy (TEM). Microstructure was observed to exert a strong influence on the tensile properties, with the grain size and lamellar volume fraction playing connected, but complex, roles. Acoustic emission response monitored during the tensile test revealed spikes whose amplitude and frequency increased with an increase in the volume fraction of lamellar grains in the microstructure. Analysis of failed samples suggested that microcracking was the main factor responsible for the spikes, with twinning providing a minor contribution in the near-lamellar materials. The most important factor that controls ductility of these alloys is grain size. The ductility, yield stress, and work-hardening rate of the binary Ti-48Al alloy exhibit maximum values between 0.50 and 0.60 volume fraction of the lamellar constituent. The high work-hardening rate, which is associated with the low mobility of dislocations, is the likely cause of low ductility of these alloys. In the near-γ and duplex structures, slip by motion of 1/2<110] unit dislocations and twinning are the prevalent deformation modes at room temperature (RT), whereas twinning is more common in the near- and fully-lamellar structures. The occurrence of twinning is largely dictated by the Schmid factor. The 1/2<110] unit dislocations are prevalent even for grain orientations for which the Schmid factor is higher for <101] superdislocations, though the latter are observed in favorably oriented grains. The activity of both of these systems is responsible for the higher ductility at ambient temperatures compared with Al-rich single-phase γ alloys. A higher twin density is observed in lamellar grains, but their propagation depends on the orientation and geometry of the individual γ lamellae. The increase in ductility at high temperatures correlates with increased activity of 1/2<110] dislocations (including their climb motion) and twin thickening. The role of microstructural variables on strength, ductility, and fracture are discussed. This article is based on a presentation made in the symposium entitled “Fundamentals of Structural Intermetallics,” presented at the 2002 TMS Annual Meeting, February 21–27, 2002, in Seattle, Washington, under the auspices of the ASM and TMS Joint Committee on Mechanical Behavior of Materials.     

Achieving near-optimum asymptotic efficiency and fading resistanceover the time-varying Rayleigh-faded CDMA channel

We study multiuser receiver design and analysis for synchronous code-division multiple-access (CDMA) channels with time-varying Rayleigh fading. Starting from an error probability criterion, we first derive a near-optimum receiver for this channel that admits a detector-estimator decomposition, has certain asymptotic optimality properties and a complexity which is independent of the length of the observation interval. The performance of this detector is analytically characterized and contrasted with that of the optimal multiuser detector for the time-invariant (or static) CDMA Rayleigh-fading channel when it is implemented over the time-varying channel. Notable among our conclusions is the fact that, unlike the static channel multiuser detector, the time-varying channel detector is able to withstand not only the estimated interference from the other system users, but also, the residual interference (that cannot be estimated) arising out of imperfect estimation of the interferer fading parameters. Using estimation error covariance information, this detector shows flexibility in accommodating a wide range of interferer fading conditions     

An approximate analysis of the effect of micro fractures on the caustic of a dynamically moving crack tip

The optical recording of the conditions at the tips of dynamically moving cracks is often associated with a wave pattern which arises from what we call here radial waves. This observation is prevalent for tough solids, especially when the observation tools involve surface deformations such as the caustic method. These waves can modify the caustic shape and size and thus influence the interpretation of measurements. The quantification of the sources of these waves poses a very difficult problem so that a precise evaluation of that phenomenon is not yet possible. However, in an attempt to better understand the limitation imposed on the method of caustics by this set of waves this paper analyzes primarily the change of shape in the caustic associated with the passage of radial waves over the region of the initial curve of the caustic. The analysis is approximate in that the radial waves are assumed to be insensitive to the presence of the crack surfaces, but otherwise accounts for the three dimensional character of wave propagation in a plate of finite thickness.

---

Résumé On associe souvent l'enregistrement optique des conditions présentes à l'extrémité de fissures en cours de propagation spectaculaire, à une disposition ondulée, due à ce que l'on dénomme ici des ondes radiales. L'observation vaut surtout pour les corps à haute ténacité, et en particulier lorsque les méthodes d'observation tiennent compte des déformations de surface, comme la méthode des caustiques. Les ondes radiales peuvent altérer la forme et la dimension d'une caustique, et, de ce fait, influencer l'interprétation des mesures. Une évaluation précise de ce phénomène n'est pas encore possible, car la quantification des sources de ces ondes pose un problème trés délicat. Néanmoins, en vue de mieux comprendre les limites qu'impose à la méthode des caustiques la formation de ces ondes, on a analysé essentiellement le changement de forme de la caustique lorsque se développent des ondes radiales sur la région couverte par la courbe originale de la caustique. On procède à une approximation dans la mesure où on suppose que les ondes radiales sont insensibles à la présence des surfaces de la fissure, mais prennent par ailleurs en considération le caractère tridimensionnel de la propagation d'une fissure dans une plaque d'épaisseur finie.

     

Polymers from renewable resources. I. Castor oil-based interpenetrating polymer networks: Thermal and mechanical properties

A number of polyurethanes (PUs) were synthesized by reacting castor oil with toluene-2,4-diisocyanate and hexamethylene diisocyanate and varying the NCO/OH ratio. All these polyurethanes were reacted with some acrylic monomers like ethyl acrylate, n-butyl acrylate, ethyl methacrylate, and butyl methacrylate using a crosslinker ethylene glycol dimethyl-acrylate and benzoyl peroxide as the initiator. The physicochemical properties of interpenetrating polymer networks (IPNs) are reported. Thermogravimetric analysis was used to study the thermal behavior of IPNs and the evaluation of kinetic parameters. Degradation mechanism has also been investigated. Some of the mechanical properties viz. tensile strength, shore-A hardness, elongation at break, etc. are also reported. © 1993 John Wiley & Sons, Inc.     

Grafting vinyl monomers onto silk fibers. II. Graft copolymerization of methyl methacrylate onto silk by hexavalent chromium ion

The feasibility of chromium(VI) to induce graft polymerization of methyl methacrylate onto silk was investigated. The rate of grafting was determined by varying monomer concentration, chromium(VI) concentration, temperature, acidity of the medium, nature of the silk, reaction medium, and redox system. The graft yield increased with increasing monomer concentration up to 0.65M, and with further increase of monomer the graft yield decreased. The graft yield increased with increasing chromium(VI) concentration. The grafting is considerably influenced by chemical modification of silk prior to grafting. The graft yield is influenced by thiourea concentration, decreasing with increasing thiourea concentration. The effect of certain inorganic salts and anionic surfactants on the rate of grafting was investigated.