Chromophore-Free Sealing and Repair of Soft Tissues Using Mid-Infrared Light-Activated Biosealants

Poor strength, infection, leakage, long procedure times, and inflammation limit the efficacy of common tissue sealing devices in surgeries and trauma. Light-activated sealing is attractive for tissue sealing and repair, and can be facilitated by the generation of local heat following absorption of nonionizing laser energy by chromophores. Here, the inherent ability of biomaterials is exploited to absorb nonionizing, mid-infrared (midIR) light in order to engender rapid photothermal sealing and repair of soft tissue wounds. In this approach, the biomaterial simultaneously acts as a photothermal convertor as well as a biosealant, which dispenses the need for exogeneous light-absorbing nanoparticles or dyes. Biomechanical recovery, mathematical modeling, histopathology analyses, tissue strain mapping using digital imaging correlation, and visualization of the biosealant-tissue interface using hyperspectral imaging indicate superior performance of midIR sealing in live mice compared to conventional sutures and glue. The midIR-biosealant approach demonstrates rapid sealing of soft tissues, improves cosmesis, lowers potential for scarring, obviates safety concerns because of the nonionizing light used, and allows adoption of a wide diversity of biomaterials. Taken together, the studies demonstrate a novel advance both in biomaterials for surgical sealing along with the use of nonionizing midIR light, with high potential for clinical translation.     

Use of recursive methods in fuzzy fault tree analysis: an aid to quantitative risk analysis

This paper demonstrates the use of recursive techniques in quantitative risk analysis when the probability of occurrence of the basic events is uncertain (fuzzy) in nature instead of having a precise value. Cases of both coherent and non-coherent fault trees with replicated events are dealt with. The analyses have been computerized using an IBM compatible personal computer (PC-AT). The source code is in C and uses Turbo-C graphics routines for creating plots. A wide variety of examples with different membership functions have been considered.     

Oxygen-enrichment of YBa2Cu3 YBa2Cu3O7-δ using the fluidization techniqueusing the fluidization technique

The oxygen-deficient phase of the highT _c superconductor, YBa₂Cu₃O₇, was oxygen-enriched using the fluidization technique to give good superconducting properties. The normal method of oxygen treatment at 900°C for 24 h and at 600°C for 24 h has been reduced to just one treatment at 600°C for 12 h by the fluidization technique to achieve almost the same strength of superconducting signal for the YBa₂Cu₃O₇ powder, which establishes the attractiveness of the latter route for the large-scale preparation of superconducting material. The particle sizes were in the range 0–90, 90–180 and 180–420 μm. The fluidized particles were crystalline with orthorhombic distortion.T _c ^onset , estimated using the a.c. magnetic susceptibility method, was 91·3 K. The volume fraction of superconducting material in the product was 83·7–85·3%, one of the highest values reported so far for YBa₂Cu₃O₇.     

Failure Analysis Approach to Fracture Studies in Powder Metallurgy Parts

This paper presents a failure analysis of tool steel and brass powder metallurgy (P/M) parts that failed during service. A detailed failure investigation of fractured tool steel and brass parts was carried out to assess the causes for their premature failures. The fractured surfaces of the broken pieces and the component surfaces were subjected to detailed examination. Investigations were carried out by visual methods, microhardness measurements, and using optical and scanning electron microscopes. In the case of the brass sample, visual examination of the surface indicated flat surface features. Detailed optical and electron microscopic studies corroborated by microhardness indentations have conclusively established that the failure was mainly due to the presence of very small impurities in the brass component material. In the case of the tool steel sample, the fractured surfaces of the component were subjected to destructive and nondestructive tests. Representative fractured pieces were examined visually and tested for their yield strength using simple tensile tests. Optical and scanning electron microscopies at appropriate magnifications were also performed to characterize its microstructure and fracture morphology. Detailed investigations of the tool steel part established that the failure was mainly due to inferior yield strength of the component resulting from improper heat treatment.     

Modelling and experimental investigation of devolatilizing wood in a fluidized bed combustor

A two-dimensional model is developed for the determination of devolatilization time and char yield of cylindrical wood particles in a bubbling fluidized bed combustor. By using the concept of shape factor, the model is extended to particles of cuboid shape. The model prediction of the devolatilization time agrees with the measured data (present and those reported in the literature) for cylindrical and cuboidal shaped particles within ±20% while the char yield is predicted within ±17%. Influence of some important parameters namely, thermal diffusivity, external heat transfer coefficient and shrinkage, on the devolatilization time and char yield are studied. Thermal diffusivity shows noticeable influence on devolatilization time. The external heat transfer coefficient shows little influence beyond a value of 300 W/(m² K). However particle shrinkage shows negligible effect on the devolatilization time but has a significant influence on the char yield.     

Analysis of frictional energy dissipation on an annular surface with harmonic loading

Metallic mating surfaces in structural joints offer a good source of frictional energy dissipation resulting in a damped dynamic structural response. This paper reports the results of experiments where the energy dissipation per cycle occurring at a preloaded flat metallic annular interface subjected to cyclic tangential forces is measured. The effects of certain pertinent joint variables on this frictional energy dissipation are investigated by the application of Response Surface Methodology. A central composite rotatable design was utilized for developing empirical expressions for energy loss. The methodology presented suggests a useful technique for tribological research.     

A comparative investigation of interfacial adhesion behaviour of polyamide based self-reinforced polymer composites by single fibre and multiple fibre pull-out tests

Abstract

Interfacial adhesion of composite materials plays an important role in their mechanical properties and performance. In the present investigation, analysis of the interfacial properties of self-reinforced polyamide composites by using microbond multiple fibre pull-out test is emphasised. Microbond specimens prepared through thermal processing are tested for their interfacial properties by multiple fibre bundle pull-out tests and compared with that of traditional single fibre pull-out test specimens. Multiple fibre pull-out addresses the volume fraction as well as eliminates the possibility of fibre breakage before matrix shear. Higher scatter in the data in the samples is addressed in the present studies. FTIR and Fractographic studies are carried out for deep understanding of the post pull-out interfacial adhesion.