Non-aqueous electrodeposition of ZnO and CdO films

ZnO films were electrodeposited from a dimethylsulfoxide bath containing dissolved gaseous oxygen. Variations in deposition parameters and their effects on the structural (crystal size, growth direction), optical (bandgap variations, photoluminescence) and electrical (conductivity) properties are described. The technique was extended to give highly-conducting films of CdO.     

Synthesis and Photopolymerization of Tween 20 Methacrylate/N-vinyl-2-Pyrrolidone Blends

Poly(oxyethylene 20 sorbitan) monolaurate (Tween® 20) methacrylates were synthesized by coupling methacryloyl chloride (MeOCl) to Tween 20 in the presence of 4-(N,N-dimethylamino) pyridine, using THF as a solvent, in order to investigate their suitability as precursors for photopolymerizable hydrogels in tissue engineering applications. The degree of substitution could be controlled by adjusting the molar ratio of MeOCl and Tween 20, giving three different monomers: Tween 20 monomethacrylate, Tween 20 dimethacrylate and Tween 20 trimethacrylate. Combined ¹ H NMR and MALDI-TOF MS confirmed these monomers to be of high purity and to have polydispersities less than 1.3. It was shown that aqueous solutions of the monomers were photoactive, all the methacrylate groups reacting within 30 minutes exposure to a UV light intensity of 145 mW/cm². Aqueous Tween 20 trimethacrylate was then combined with N-vinyl-2-pyrrolidone (NVP), giving tough copolymer hydrogels on photopolymerization, whose swelling ratios and swelling rates could be tuned by varying the Tween 20 trimethacrylate content. The use of a flexible spacer with a multifunctional monomer gives a permanent three-dimensional network, whilst maintaining degrees of swelling of between 60 and 85%, with potential for a wide range of biological and non-biological applications.     

Preparation,characterization, electrical and antibacterial properties of sericin/poly(vinyl alcohol)/poly(vinyl pyrrolidone) composites

In this study, we focused on the fabrication of poly(vinyl alcohol) (PVA)/poly(vinyl pyrrolidone) (PVP)/sericin composites via a simple solution‐blending method. The composites were characterized by Fourier transform infrared (FTIR) spectroscopy, UV spectroscopy, X‐ray diffraction (XRD), scanning electron microscopy (SEM), differential scanning calorimetry, thermogravimetric analysis (TGA), and measurements of the conductivity, tensile strength, and antibacterial activity against Staphylococcus aureus. The results of FTIR and UV spectroscopy implied the occurrence of hydrogen bonding between sericin and the PVA/PVP blend. The structure and morphology, studied by XRD and SEM, revealed that the sericin particles were well dispersed and arranged in an orderly fashion in the blend. The glass‐transition temperature (T_g) of the composite was higher than that of the pure blend, and the T_g value shifted toward higher temperatures when the volume fraction of sericin increased. TGA indicated that sericin retarded the thermal degradation; this depended on the filler concentration. The mechanical and electrical properties, such as the tensile strength, alternating‐current electrical conductivity, dielectric constant, and dielectric loss of the composites, were higher than those of the pure blend, and these properties were enhanced when the concentration of sericin was increased up to 10 wt % filler content, whereas the elongation at break of the composite decreased with the addition of sericin particles. The antibacterial properties of the composite showed that sericin had a significant inhibitory effect against S. aureus. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43535.     

Synthesis and polymerization of some iodine-containing monomers for biomedical applications

Triiodophenol and iothalamic acid (5-acetamido-2,4,6-triio-N-methyl isophthalamic acid) were converted to their acrylic derivatives by esterfication with methacryloyl chloride and 2-hydroxyethyl methacrylate (HEMA), respectively. The monomers due to presence of heavy iodine atoms were expected to be radiopaque in nature. The monomers were characterized using TLC, IR, and ¹H-NMR spectroscopy. Both monomers were highly resistant to homopolymerization and copolymerization with other acrylic monomers such as methyl methacrylate (MMA) or HEMA by initiators such as 2,2′-azobis isobutyronitriie (AIBN) or benzoyl peroxide (BPO) yielding only polymers of low molecular weight. The polymers obtained were charactrized by gel permeation chromatography (GPC) and differential thermal analysis (DTA). The resistance to polymerization is presumably due to the presence of bulky iodine atoms in the monomers sterically hindering the propagation step. The decomposition temperatures of the homopolymers and copolymers were close to 300°. Copolymers of HEMA with both radiopaque monomers incorporated to the extent of 25 wt % in the feed, however, produced polymers with good radiopacity. Copolymers with HEMA were also prepared in the form of microspheres by a solvent evaporation method with the aim of using them as particles in therapeutic embolization. While the polymer based on triiodophenol was found to cause extensive blood haemolysis in in vitro tests, polymer based on iothalamic acid was found to be nonhemolytic in character suggesting that copolymers based on iothalamic acid would be suitable for implantation in the living tissue.     

Variations of surface boundary layer parameters associated with Cyclone Gonu over the Arabian Sea using QuikSCAT data

This study attempted to quantify the variations of the surface marine atmospheric boundary layer (MABL) parameters associated with the tropical Cyclone Gonu formed over the Arabian Sea during 30 May–7 June 2007 (just after the monsoon onset). These characteristics were evaluated in terms of surface wind, drag coefficient, wind stress, horizontal divergence, and frictional velocity using 0.5° × 0.5° resolution Quick Scatterometer (QuikSCAT) wind products. The variation of these different surface boundary layer parameters was studied for three defined cyclone life stages: prior to the formation, during, and after the cyclone passage. Drastic variations of the MABL parameters during the passage of the cyclone were observed. The wind strength increased from 12 to 22 m s^?1 in association with different stages of Gonu. Frictional velocity increased from a value of 0.1–0.6 m s^?1 during the formative stage of the system to a high value of 0.3–1.4 m s^?1 during the mature stage. Drag coefficient varied from 1.5 × 10^?3 to 2.5 × 10^?3 during the occurrence of Gonu. Wind stress values varied from 0.4 to 1.1 N m^?2. Wind stress curl values varied from 10 × 10^?7 to 45 × 10^?7 N m^?3. Generally, convergent winds prevailed with the numerical value of divergence varying from 0 to –4 × 10^?5 s^?1. Maximum variations of the wind parameters were found in the wall cloud region of the cyclone. The parameters returned to normally observed values in 1–3 days after the cyclone passage.     

Effect of additives on electrodeposition of tin and its structural and corrosion behaviour

The present investigation deals with the electrodeposition of tin from chloride electrolytes. Gelatin, β-naphthol, polyethylene glycol, peptone and histidine were used as additives in the plating bath to improve the surface morphology, grain size, smoothness and corrosion resistance of the tin deposits. XRD data obtained for electrodeposited tin show polycrystalline nature with single β-phase and tetragonal structure. A uniform and pore free surface was observed under SEM analysis. AFM results indicate the grain refining brought about by the additives. Corrosion rate measurements using the Tafel extrapolation method and electrochemical impedance spectroscopy reveal the increased corrosion resistance from baths containing additives.     

Preparation of hydrogel beads from crosslinked poly(methyl methacrylate) microspheres by alkaline hydrolysis

Poly(methyl methacrylate)/(PMMA) microspheres crosslinked with various concentrations of ethylene glycol dimethacrylate (EGDM) were prepared by a suspension polymerization procedure. They were subjected to alkaline hydrolysis in ethylene glycol at high temperature (> 175°C), resulting in the rapid conversion of methacrylate ester functions to methacrylic acid, while retaining the spherical shape of the microspheres intact. The method provides a novel approach to obtain smooth, nearly perfect spherical, mechanically strong, high water-absorbing hydrogel beads from crosslinked PMMA. The reaction has been found to be considerably faster than many of the hydrolysis procedures reported previously. The effect of concentration of alkali, particle size, crosslinking density, and reaction time on the extent of hydrolysis has been investigated to a limited extent.     

Radiation grafting of hydrophilic monomers onto plasticized poly(vinyl chloride) sheets

Medical grade poly(vinyl chloride) (PVC) sheets were surface modified by grafting a combination of 2-hydroxyethyl methacrylate (HEMA) and N-vinyl pyrrolidone (NVP) or NVP alone using gamma radiation in an effort to retard the migration of the plasticizer from the PVC matrix. Presence of cupric ions at a concentration of 0.005m was found to be optimal in not only preventing the homopolymerization of the monomers but also producing the highest graft yield at all monomer concentrations used for grafting. The grafted PVC was characterized for its water absorption properties. Surface morphology of the grafted surface was examined using scanning electron microscopy (SEM). PVC sheets grafted on both sides as well as on one side were characterized for their physical and mechanical properties in order to assess their suitability in biomedical applications. While the tensile strength and percentage elongation values of PVC sheets grafted on both sides showed a downward trend with increasing graft yield, these properties were not drastically affected by surface modification on one side only at graft yields pertinent to prevent the migration of the plasticizer. Measurement of Shore A hardness and optical transparency of the migration resistant sheetings showed that such properties were not seriously affected by surface modification thus rendering them suitable for their intended applications.     

Composition-dependent xBa(Zr0.2Ti0.8)O3-(1-x)(Ba0.7Ca0.3)TiO3 bulk ceramics for high energy storage applications

This work reports the composition dependent microstructure, dielectric, ferroelectric and energy storage properties, and the phase transitions sequence of lead free xBa(Zr_0.2Ti_0.8)O₃-(1-x)(Ba_0.7Ca_0.3)TiO₃ [xBZT-(1-x)BCT] ceramics, with x?=?0.4, 0.5 and 0.6, prepared by solid state reaction method. The XRD and Raman scattering results confirm the coexistence of rhombohedral and tetragonal phases at room temperature (RT). The temperature dependence of Raman scattering spectra, dielectric permittivity and polarization points a first phase transition from ferroelectric rhombohedral phase to ferroelectric tetragonal phase at a temperature (T_R-T) of 40?°C and a second phase transition from ferroelectric tetragonal phase - paraelectric pseudocubic phase at a temperature (T_T-C) of 110?°C. The dielectric analysis suggests that the phase transition at T_T-C is of diffusive type and the BZT-BCT ceramics are a relaxor type ferroelectric materials. The composition induced variation in the temperature dependence of dielectric losses was correlated with full width half maxima (FWHM) of A₁, E(LO) Raman mode. The saturation polarization (P_s) ≈8.3?μC/cm² and coercive fields ≈2.9?kV/cm were found to be optimum at composition x?=?0.6 and is attributed to grain size effect. It is also shown that BZT-BCT ceramics exhibit a fatigue free response up to 10⁵ cycles. The effect of a.c. electric field amplitude and temperature on energy storage density and storage efficiency is also discussed. The presence of high T_T-C (110?°C), a high dielectric constant (ε_r ≈?12,285) with low dielectric loss (0.03), good polarization (P_s ≈?8.3?μC/cm²) and large recoverable energy density (W?=?121?mJ/cm³) with an energy storage efficiency (η) of 70% at an electric field of 25?kV/cm in 0.6BZT-0.4BCT ceramics make them suitable candidates for energy storage capacitor applications.     

Surface modification of poly(ethylene terephthalate) by plasma polymerization of poly(ethylene glycol)

Poly(ethylene glycol) (PEG) was ‘polymerized’ onto poly(ethylene terephthalate) (PET) surface by radio frequency (RF) plasma polymerization of PEG (average molecular weight 200 Da) at a monomer vapour partial pressure of 10 Pa. Thin films strongly adherent onto PET could be produced by this method. The modified surface was characterized by infra red (IR) spectroscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), cross-cut test, contact angle measurements and static platelet adhesion studies. The modified surface, believed to be extensively cross-linked, however showed all the chemical characteristics of PEG. The surface was found to be highly hydrophilic as evidenced by an interfacial free energy of about 0.7 dynes/cm. AFM studies showed that the surface of the modified PET became smooth by the plasma polymerized deposition. Static platelet adhesion studies using platelet rich plasma (PRP) showed considerably reduced adhesion of platelets onto the modified surface by SEM. Plasma ‘polymerization’ of a polymer such as PEG onto substrates may be a novel and interesting strategy to prepare PEG-like surfaces on a variety of substrates since the technique allows the formation of thin, pin-hole free, strongly adherent films on a variety of substrates.