Bond graph modeling,design and experimental validation of a photovoltaic/fuel cell/ electrolyzer/battery hybrid power system

This work presents a complete bond graph modeling of a hybrid photovoltaic-fuel cell-electrolyzer-battery system. These are multi-physics models that will take into account the influence of temperature on the electrochemical parameters. A bond graph modeling of the electrical dynamics of each source will be introduced. The bond graph models were developed to highlight the multi-physics aspect describing the interaction between hydraulic, thermal, electrochemical, thermodynamic, and electrical fields. This will involve using the most generic modeling approach possible for managing the energy flows of the system while taking into account the viability of the system. Another point treated in this work is to propose. In this work, a new strategy for the power flow management of the studied system has been proposed. This strategy aims to improve the overall efficiency of the studied system by optimizing the decisions made when starting and stopping the fuel cell and the electrolyzer. It was verified that the simulation results of the proposed system, when compared to simulation results presented in the literature, that the hydrogen demand is increased by an average of 8%. The developed management algorithm allows reducing the fuel cell degradation by 87% and the electrolyzer degradation by 65%. As for the operating time of the electrolyzer, an increment of 65% was achieved, thus improving the quality of the produced hydrogen. The Fuel Cell's running time has been decreased by 59%. With the ambition to validate the models proposed and the associated commands, the development of this study gave rise to the creation of an experimental platform. Using this high-performance experimental platform, experimental tests were carried out and the results obtained are compared with those obtained by simulation under the same metrological conditions.     

Ballistic behavior of plain and reinforced concrete slabs under high velocity impact

This work presents a numerical simulation of ballistic penetration and high velocity impact behavior of plain and reinforced concrete slabs. In this paper, we focus on the comparison of the performance of the plain and reinforced concrete slabs of unconfined compressive strength 41 MPa under ballistic impact. The concrete slab has dimensions of 675 mm × 675 mm × 200 mm, and is meshed with 8-node hexahedron solid elements in the impact and outer zones. The ogive-nosed projectile is considered as rigid element that has a mass of 0.386 kg and a length of 152 mm. The applied velocities vary between 540 and 731 m/s. 6 mm of steel reinforcement bars were used in the reinforced concrete slabs. The constitutive material modeling of the concrete and steel reinforcement bars was performed using the Johnson-Holmquist-2 damage and the Johnson-Cook plasticity material models, respectively. The analysis was conducted using the commercial finite element package Abaqus/Explicit. Damage diameters and residual velocities obtained by the numerical model were compared with the experimental results and effect of steel reinforcement and projectile diameter were studies. The validation showed good agreement between the numerical and experimental results. The added steel reinforcements to the concrete samples were found efficient in terms of ballistic resistance comparing to the plain concrete sample.     

Quasi-static and dynamic crushing behaviors of aluminum and steel tubes with a cutout

Tubular members are commonly used as an energy absorber in engineering structures and many such members have a cutout. In this study, the crushing behaviors of tubes with a cutout are characterized and the effects of cutout on the energy absorption capabilities of these tubes are quantified. Systematic parametric studies were carried out to study the effect of material properties, including yield and ultimate strength of material, strain rate effect, location of cutout, tube length and impact speed on the crushing behaviors and energy absorption capacity of aluminum and steel tubes. First, a numerical model was constructed with a commercial explicit finite element code. It will be first proven that the numerical simulation can produce sufficiently accurate results in an economic manner. Subsequently, the crushing behavior of aluminum and steel tubes with a cutout was experimentally characterized and their energy absorption capacity was evaluated in terms of mean crushing force, peak crushing force and specific energy absorption (SEA). Tubes of various lengths with a cutout located at different locations, subject to both quasi-static and dynamic impact loadings were considered. For steel tubes, the numerical simulation investigated the influence of the strain rate effect and variation in strain hardening ratio of the material. Empirical equations describing the mean and peak crushing forces of aluminum and steel tubes with a cutout were developed using linear and nonlinear regression methods applied to the results obtained from the numerical and experimental studies.     

The sinuous antenna-A dual polarized feed for reflector-based searching systems

The sinuous antennas have a numerous applications in military and civil systems such as direction finding systems and reflector feeds due to their superior broadband characteristics and simultaneous polarization capability. In this paper, design, construction and measurements of planar sinuous antennas are investigated for 1–5 GHz frequency range. Feeding sections of this antenna are realized by using microstrip tapered baluns. We have determined the microstrip tapered balun dimensions using Ansoft HFSS-simulation program. The performances of the manufactured antenna are measured using HP vector network analyzer. Polarization patterns and return loss characteristics of the designed antenna that have been measured in anechoic chamber, are presented.     

Cellular and subcellular localization of transforming growth factor-alpha and epidermal growth factor receptor in normal and diseased human and hamster pancreas

Four normal pancreas, 8 chronic pancreatitis specimens, and 30 non-endocrine pancreatic tumors from humans and 6 normal and 6 induced pancreatic cancers in hamsters were examined immunohistochemically by antibodies against human transforming growth factor-alpha (TGF-alpha) and epidermal growth factor receptor (EGFR). Two normal pancreas and two pancreatic cancer specimens from each species were also studied immunoelectron microscopically by the immunogold method. In chronic pancreatitis, the reactivity and intensity of the staining with both antibodies were much greater in ductal/ductular cells than in the normal pancreas. All 30 pancreatic cancers reacted with both antibodies with a variable degree of reactivity and staining intensity. No correlation was found between the histological type of tumors, the degree of tumor differentiation, and the incidence and patterns of reactivity of either antibody. Immunoelectron microscopically, both EGFR and TGF-alpha were demonstrated primarily on the basal membrane. In the normal hamster pancreas, TGF-alpha was overexpressed in the alpha-cells but not in any other islet cells. Both TGF-alpha and EGFR were marginally detectable in the exocrine pancreas and in induced pancreatic lesions. This is the first demonstration of subcellular localization of TGF-alpha and EGFR in the normal and diseased human and hamster pancreas.     

An image composition algorithm for handling global visual effects

Image composition is widely used in television and film industry to create synthetic visual effects. It requires seamless integration of different parts of two or more images into a single image. Existing image composition techniques only change the local contents of the resulting image while in many cases local changes may also require some global effects as well. For example, if the image of sun from one image is transferred to another image, the global brightness pattern should also be transferred. Unfortunately existing techniques cannot handle global effects of local content manipulations. This paper describes a novel image composition technique which captures global effects associated with a specific local content from one image and incorporates in the second image. In our proposed technique, all images are transformed to the frequency domain. The composite image is created in frequency domain by mixing different frequencies from multiple images and then transformed back to the spatial domain. We have experimented the proposed technique to shift the image of sun along with its global brightness pattern, the global effects of rain and also for transferring global texture pattern from one image to the other. In most of the cases the results produced by our algorithm appear far close to real images than state of the art existing image composition techniques.     

On the ‘curiosity’ of electrical self‐heating,static charge and electromagnetic shielding effectiveness from carbon black/aluminium flakes reinforced epoxy‐resin composites

This paper shows the wide application range (such as electrical self‐heating and electromagnetic shielding effectiveness) of composites consisting of conductive carbon black/aluminum flakes (CBA) filler and epoxy insulative matrix. The effect of CBA content on the network structure of epoxy matrix was investigated in detail. Static electrical conductivity increases linearly with the increase of filler concentration at the interface in epoxy composites. The large decrease of the conductivity as a function of the temperature is analyzed in terms of the negative temperature coefficient of conductivity (NTCC) effect. The influence of viscosity, surface energy and barrier highest energy on the NTCC behaviour in the composite is also considered. Based on these results, a new interpretation is proposed to explain the NTCC phenomena by computing the swelling force among conductive phases. The correlations of conductivity during the temperature cycling and activation energy were analyzed. The effects of dynamic ageing at various temperatures on the resistivity are reported. Current–voltage–temperature characteristics for epoxy with different contents of CBA were examined in detail. A model based on the law of energy conservation is proposed to calculate the specific heat and amount of heat dissipation. The static charge of the epoxy–CBA composites was estimated. The correlation between electromagnetic wave‐shielding effectiveness (EMS), conductivity and frequency of epoxy composites with different filler contents is also discussed. Furthermore, the effect of annealing on EMS of epoxy composites was examined. © 2002 Society of Chemical Industry     

Investigation of relaxation of nanodiamond surface in real and reciprocal spaces

The structure of a nanodiamond powder with an average grain size of 5 nm was investigated using large-Q neutron diffraction. Both Bragg scattering and PDF analysis were employed. The effect of annealing under vacuum at temperatures up to 1200 °C was studied. The studies lead to a tentative model of nanocrystalline diamond, where the core with a perfect diamond lattice is surrounded by a shell of compressed diamond lattice, and this core–shell structure is enveloped in a non-diamond carbon. The non-diamond envelope of nanograins, a “gas-like” carbon, is stable up to 1000 °C and transforms into a graphite phase (an onion-type structure) at about 1200 °C. The amount of non-crystalline carbon in the powder annealed below 1000 °C is about 10%. In the sample annealed at 1200 °C a graphite-type carbon, with a total of about 15% of sp² bonds is formed.     

Algorithms for Quantum Branching Programs Based on Fingerprinting

In the paper, we develop a method for constructing quantum algorithms for computing Boolean functions by quantum ordered read-once branching programs (quantum OBDDs). Our method is based on ˉngerprinting technique and representation of Boolean functions by their characteristic polynomials. We use circuit notation for branching programs for desired algorithms presentation. For several known functions our approach provides optimal QOBDDs. Namely we consider such functions as MODm, EQn, Palindromen, and PERMn (testing whether given Boolean matrix is the Permutation Matrix). We also propose a generalization of our method and apply it to the Boolean variant of the Hidden Subgroup Problem.     

Thermodynamics of ionic-association in aqueous solutions of Ca and Mg organic salts using ion-selective electrode technique—II. benzoate, o-toloate, o-chlorobenzoate and salycylate

The stoichiometric association constants, K, the thermodynamic association constant, K_A, and the other thermodynamic parameters such as ΔS°, ΔH° and ΔG° for the association between each of the Ca and Mg ions with benzoate, o-toloate, o-chlorobenzoate and salycylate have been determined at 25°C, 35°C and 45°C in aqueous media. Ion-selective electrode technique has been used in the measurements of Ca and Mg ion activitiesThe trend of association behavior of both Ca and Mg aromatic salts could not be explained on the basis of pK_a of the mother organic acids but could be explained based on the trend of Hammet function σ of these salts themselves relative to the corresponding benzoate salt.