Photon and vibration synergism on planar defects induced 2D-graphitic carbon nitride for ultrafast remediation of dyes and antibiotic ampicillin

Journal of Materials Science - Hybrid oxidation methodologies (HOMs) and active site enrichment of 2D nanocatalyst through defects induction are ubiquitously used for generating adequate reactive...     

Process optimisation in sunflower oil extraction by supercritical CO2

A continuous process for the extraction of sunflower oil using supercritical CO₂, featuring multiple extractors, one oil separator and three cascaded CO₂ recovery vessels operating at different pressures, was devised and studied. For every single equipment of the plant making up the process a mathematical model was built. Experimental tests—consisting in measurements of oil solubility in supercritical CO₂—were carried out in a laboratory-scale apparatus to characterise the behaviour of sunflower oil in the separation from the supercritical fluid. The mathematical model of the whole process was coded in the commercial gPROMS process modelling environment where both its simulation and optimisation—this latter assuming the overall oil production cost as the objective function—were carried out. The process- and economics-related results are discussed and compared with those obtained with traditional and cold-pressing extraction.     

Kinetics of discontinuous precipitation in a Zn-2.5 at % Cu alloy

The morphology and growth kinetics of discontinuous precipitation in a Zn-2.5 at % Cu alloy have been studied in the temperature range 383–583 K by optical and scanning electron microscopy. The precipitate phase has a lamellar morphology, and maintains a statistically constant interlamellar spacing under isothermal growth conditions. The interlamellar spacing increases with an increase in temperature. The isothermal growth kinetics in terms of reaction front migration rate is maximum at 523 K. The upper temperature limit for the occurrence of reaction in this alloy has been predicted to be 643 K. A detailed kinetic analysis of the experimental data using several analytical models has confirmed discontinuous precipitation in this system to be a boundary diffusion controlled reaction, and enabled the determination of the grain boundary chemical diffusivity of Cu in a Zn-rich Zn-Cu alloy in the temperature range studied. The corresponding activation energy values determined in this study, range between 65 to 86 kJ/mol^–1, which compare well with the relevant data in the literature.     

Dual-Metal Double-Gate with Low-k/High-k Oxide Stack Junctionless MOSFET for a Wide Range of Protein Detection: a Fully Electrostatic Based Numerical Approach

Silicon - We investigate the performance of a dielectric modulated dual-metal double-gate with low-k/high-k oxide stack junctionless MOSFET (DM-DG-LK/HK-S JL-MOSFET) based sensor device for...     

Artificial Neural Network and Grey Wolf Optimizer Based Surrogate Simulation-Optimization Model for Groundwater Remediation

We herein propose a simulation-optimization model for groundwater remediation, using PAT (pump and treat), by coupling artificial neural network (ANN) with the grey wolf optimizer (GWO). The input and output datasets to train and validate the ANN model are generated by repetitively simulating the groundwater flow and solute transport processes using the analytic element method (AEM) and random walk particle tracking (RWPT). The input dataset is the different realization of the pumping strategy and output dataset are hydraulic head and contaminant concentration at predefined locations. The ANN model is used to approximate the flow and transport processes of two unconfined aquifer case studies. The performance evaluation of the ANN model showed that the value of mean squared error (MSE) is close to zero and the value of the correlation coefficient (R) is close to 0.99. These results certainly depict high accuracy of the ANN model in approximating the AEM-RWPT model. Further, the ANN model is coupled with the GWO and it is used for remediation design using PAT. A comparison of the results of the ANN-GWO model with solutions of ANN-PSO (ANN-Particle Swarm Optimization) and ANN-DE (ANN-Differential Evolution) models illustrates the better stability and convergence behaviour of the proposed methodology for groundwater remediation.

     

Multi-objective optimization in wire-electro-discharge machining of TiC reinforced composite through Neuro-Genetic technique

This paper proposed a Neuro-Genetic technique to optimize the multi-response of wire electro-discharge machining (WEDM) process. The technique was developed through hybridization of a radial basis function network (RBFN) and non-dominated sorting genetic algorithm (NSGA-II). The machining was done on 5 vol% titanium carbide (TiC) reinforced austenitic manganese steel metal matrix composite (MMC). The proposed Neuro-Genetic technique was found to be potential in finding several optimal input machining conditions which can satisfy wide requirements of a process engineer and help in efficient utilization of WEDM in industry.     

Deductive verification of alternating systems

Alternating systems are models of computer programs whose behavior is governed by the actions of multiple agents with, potentially, different goals. Examples include control systems, resource schedulers, security protocols, auctions and election mechanisms. Proving properties about such systems has emerged as an important new area of study in formal verification, with the development of logical frameworks such as the alternating temporal logic ATL*. Techniques for model checking ATL* over finite-state systems have been well studied, but many important systems are infinite-state and thus their verification requires, either explicitly or implicitly, some form of deductive reasoning. This paper presents a theoretical framework for the analysis of alternating infinite-state systems. It describes models of computation, of various degrees of generality, and alternating-time logics such as ATL* and its variations. It then develops a proof system that allows to prove arbitrary ATL* properties over these infinite-state models. The proof system is shown to be complete relative to validities in the weakest possible assertion language. The paper then derives auxiliary proof rules and verification diagrams techniques and applies them to security protocols, deriving a new formal proof of fairness of a multi-party contract signing protocol where the model of the protocol and of the properties contains both game-theoretic and infinite-state (parameterized) aspects.     

High power GaN‐HEMT SPDT switches for microwave applications

In this article, the design, fabrication, and on‐wafer test of X‐Band and 2–18 GHz wideband high‐power SPDT MMIC switches in AlGaN/GaN technology are presented. The switches have demonstrated state‐of‐the‐art performance and RF fabrication yield better than 65%. Linear and power measurements for different control voltages have been reported and an explanation of the dependence of the power performances on the control voltage is given. In particular, the X‐band switch exhibits a 0.4 dB compression level at 10 GHz when driven by a 38 dBm input signal. The wideband switch shows a compression level of 1 dB at an input drive higher than 38 dBm across the entire bandwidth. © 2009 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2009.     

Preprogramming Floating Time of Liquid Marble

Non-sticking droplets wrapped with fine hydrophobic particles, namely liquid marbles, can be transported both on solid and water pool without an undesired spill of the inner encapsulated liquid. While the stimuli-responsive release of the inner liquid in the target area is proposed, the time-programmed release is not yet achieved. Herein, the hydrophobicity of nanoclay is modulated via a catalyst-free 1,4-conjugate addition reaction to form liquid marbles. This nanoclay liquid marble is robust and stable in air but collapses on the liquid pool with a specific lifetime. The lifetime of the liquid marble can be modulated over seconds to hours scale depending on the selection of chemically modulated wettability of the nanoclay. The critical mechanism of lifetime modulation is responsible for controlling the coalescence kinetics between the water pool and inner liquid by nanoclays’ high diffusion length and chemically varied water spreading potential. The NC liquid marble's programmable lifetime to ‘time-bomb’ type drug release and cascade chemical reaction is applied—without requiring any external intervention.