Role of electron traps in the radiation hardness of thermallynitrided silicon dioxide

A number of samples of thermally nitrided SiO₂ with varying concentrations of electron traps were studied in an attempt to correlate the radiation-induced oxide charge with the number of electron traps. Also studied were the detrapping characteristics of irradiated devices. Etch-back experiments were performed to locate the centroid of the trapped charge. The results show that electron trapping does play a role in the improved radiation hardness of nitrided SiO₂, but is not the sole cause of it     

Real-Time Temperature Compensation of MEMS Oscillators Using an Integrated Micro-Oven and a Phase-Locked Loop

We present a new temperature compensation system for microresonator-based frequency references. It consists of a phase-locked loop (PLL) whose inputs are derived from two microresonators with different temperature coefficients of frequency. The resonators are suspended within an encapsulated cavity and are heated to a constant temperature by the PLL controller, thereby achieving active temperature compensation. We show repeated real-time measurements of three 1.2-MHz prototypes that achieve a frequency stability of $pm$ 1 ppm from $-20 ^{circ}hbox{C}$ to $+80 ^{circ}hbox{C}$, as well as a technique to reduce steady-state frequency errors to $pm$0.05 ppm using multipoint calibration.$hfill$[2009-0074]      

Thermal Isolation of Encapsulated MEMS Resonators

This paper presents an in-chip thermal-isolation technique for a micro-ovenized microelectromechanical-system resonator. Resonators with a microoven can be used for high-precision feedback control of temperature to compensate for the temperature dependence of resonator frequency over a wide temperature range. However, ovenization requires power consumption for heating, and the thermal time constant must be minimized for effective temperature control. This paper demonstrates an efficient local-thermal-isolation mechanism, which can reduce the power requirement to a few milliwatts and the thermal time constant to a few milliseconds. In this method, the mechanical suspension of the resonator is modified to provide thermal isolation and include an integrated resistive heater. This combination provides mechanical suspension, electrical heating, and thermal isolation in a compact structure that requires low heating power and has a small thermal time constant. A power consumption of approximately 12 mW for a 125degC temperature rise and a thermal time constant ranging from 7 to 10 ms is reported in this paper, which is orders of magnitude lower than that of commercially available ovenized quartz resonators. A CMOS-compatible wafer-scale encapsulation process is used to fabricate this device, and the thermal-isolation design is achieved without any modification to the existing resonator fabrication process.     

Sterile keratitis after corneal collagen crosslinking in a child

Corneal collagen crosslinking (CXL) is a non invasive technique used in halting the progression of keratoconus. Complications with this modality are rare. We report a case of an 8-year-old child who developed sterile infiltrates in the immediate postoperative period after uneventful corneal collagen crosslinking for keratoconus. The infiltrates resolved with topical steroid therapy. There was also present coexisting vernal keratoconjunctivitis (VKC) which was controlled with topical 2% cyclosporine A eye drops prior to crosslinking treatment. This case highlights importance of controlling VKC prior to CXL in keratoconus as it adds to the risk of developing post operative sterile keratitis.     

Antimicrobial and SEM Studies of Sophorolipids Synthesized Using Lauryl Alcohol

In recent years, researchers have developed biosurfactants for industrial, pharmaceutical and medical applications revealing the promising biological activities of these biomolecules. One of the best studied microbial surfactants are glycolipids, especially sophorolipids (SLs) produced by selected non-pathogenic yeast species of Candida. They are biodegradable, non-toxic and are environmentally friendly. Sophorolipid production was carried out using glucose as the hydrophilic source and lauryl alcohol C_12–14, as the hydrophobic source using Candida bombicola ATCC 22214. Primary characterization of the SL obtained using lauryl alcohol (SLLA) was done by FTIR which depicted the presence of alkyl sophorosides/SLs. Antimicrobial activity testing revealed that SLLA showed complete inhibition against gram negative bacteria, Escherichia coli (ATCC 8739) Pseudomonas aeruginosa (ATCC 9027) at 30 and 1 μg/ml at a contact time of 2 and 4 h respectively. Whereas for gram positive bacteria Staphylococcus aureus (ATCC 6358), Bacillus subtilis (ATCC 6633), complete inhibition was observed at 6 and 1 μg/ml respectively at a contact time of 4 h. The formed SLLA showed noteworthy inhibition against the pathogenic yeast Candida albicans (ATCC 2091) at 50 μg/ml with a contact time of 4 h. These values are remarkably low compared to reported values of oleic acid SLs and linolenic acid SLs which were studied for antimicrobial properties. Scanning electron microscopy analysis of the treated cells revealed the changes in morphology and topography of the microorganisms.     

A new public-domain simulator for power electronic circuits

A new public-domain simulator (SEQUEL) for power electronic circuits is described. The organization of the simulator is briefly discussed. The most important feature of the simulator is that the user can define new elements in a flexible manner. The differences between the new simulator and other simulators are enumerated. Some simulation examples are discussed to demonstrate the applications of the simulator. It is pointed out that the new simulator is particularly attractive for engineering institutes in developing countries where access to expensive commercial packages with similar capabilities may be difficult     

Aerosol characteristics over Delhi national capital region: a satellite view

Multi-sensor aerosol data sets are analysed to examine the aerosol characteristics over the Delhi national capital region. Both the Multiple-angle Imaging Spectroradiometer (MISR) and Moderate Resolution Imaging Spectroradiometer (MODIS) capture the seasonal cycle of aerosol optical depth (AOD) as observed by ground-based measurements. However, AOD from MISR shows a low bias relative to AOD from MODIS, which increases linearly at high AOD conditions. A large difference (by >25 W m^–2 per unit AOD) in the top-of-atmosphere direct radiative forcing efficiency derived from MODIS and MISR-retrieved AOD is observed during the winter and pre-monsoon seasons relative to the other seasons. The ubiquitous presence of dust (as indicated by non-spherical particle fraction to AOD and linear depolarization ratio values) is observed throughout the year. The aerosol layer is mostly confined to within 2 km of surface in the winter and post-monsoon seasons, while it expands beyond 6 km in the pre-monsoon and monsoon seasons. Columnar AOD is found to be highly sensitive to aerosol vertical distribution. The applicability of multi-sensor data sets and climatic implications are discussed.     

Removal of Cd (II) and Pb (II) from aqueous environment using Moringa Oleifera seeds as biosorbent: A low cost and ecofriendly technique for water purification

Ever-growing list of chemical contaminants released into the environment through excessive industrialization on a large scale includes numerous chemical pollutants more prominently heavy metals. The discharge of heavy metals in aqueous system and their removal have been a challenging task for environmentalists for last one decade. Keeping these views in mind, the present study highlights the efficacy of shelled Moringa oleifera seeds (SMOS) in decontaminating Cd (II) and Pb (II) ions from aqueous environment both present as single metal and as binary metal solution. The extent of adsorption capacity for Cd (II) and Pb (II) on Moringa oleifera seeds for binary metal ions [76.59% and 81.10%] was found to be low as compared to single metal ions [85.10% and 96.10%]. Morphological changes observed in Scanning Electron Micrographs of native and treated SMOS indicates the existence of biosorption phenomenon. Fourier Transform Infrared Spectrometry of the exhausted seed biomass highlights amino acids-metal interaction responsible for sorption phenomenon. The sorption capacity of regenerated biomass remained almost constant after three cycle of sorption suggesting that the lifetime cycle was sufficient for continuous application.     

Calculation of Channel Capacity Considering the Effect of Different Seasons for Higher Altitude Platform System

This paper presents effect of the weather impairments on a high altitude platform (HAP) broadband wireless communication system. It is shown that attenuation due to oxygen, water vapor, fog, cloud, and rain has significant effect on a radio link which is operating in a millimeter frequency range. Channel capacity is calculated for different seasons using Shannon’s channel capacity theorem. The location of HAP is taken to be Delhi (India). Further, it is considered that a user and the HAP platform are stationary.     

Hierarchical Delay Test Generation

Delay testing is used to detect timing errors in a digital circuit.In this paper, we report a tool called MODET forautomatic test generation for path delay faults in modular combinational circuits. Our technique usesprecomputed robust delay tests for individual modules to computerobust delay tests for the module-level circuit. We present alongest path theorem at the module level ofabstraction which specifies the requirements for path selectionduring delay testing. Based on this theorem, we propose a pathselection procedure in module-level circuits and report efficientalgorithms for delay test generation. MODET hasbeen tested against a number of hierarchical circuits with impressivespeedups in relation to gate-level test generation.