Hemodynamic effects of spinal anesthesia in the elderly: single dose versus titration through a catheter

Protective immunity against infection with Mycobacterium tuberculosis is imparted by T cells rather than antibodies, but B cells can play a role as antigen-presenting cells and in granuloma formation. We re-evaluated the role of B cells in the course of tuberculous infection in mu-chain knock-out (Ig-) mice. Surprisingly, the organs of M. tuberculosis-infected Ig- mice were found to have three- to eight-fold elevated counts of viable bacilli compared with normal littermates at 3-6 weeks post-infection. Splenic interferon-gamma responses to whole antigen were unimpaired, whilst proliferation to certain mycobacterial peptides was found to be diminished. However, bacille Calmette-Guérin (BCG) vaccination significantly reduced the infection in Ig- mice. The mechanisms by which B cells can influence primary tuberculous infection need further study.     

EIS evaluation of the filiform corrosion of aluminium coated by a cataphoretic paint

Filiform corrosion is mainly considered as a cosmetic attack and is undesirable in most applications. The initiation and propagation of the filaments are related to different parameters such as the presence of defects, the permeability of the coating to water and oxygen, the adherence of the paint system and the presence of salts.

The aim of this work is to study the behaviour of painted aluminium samples towards filiform corrosion or delamination. The 6082 Aluminium alloy was selected and the samples were covered with a cataphoretic epoxy primer without lead (PPG Industries France). Prior to the application of the electrocoat, the samples were pre-treated by a commercial Zr/Ti or chromate conversion treatment or simply etched with a commercial acid etching product.

Filiform corrosion was studied by the normalized test (ISO/DIS 4623): painted and scratched samples were inoculated in HCl and exposed in a constant humidity chamber at 40 °C and 82% RH for 3 weeks. After exposure the samples were subjected to a visual and optical microscopic examination.

Electrochemical impedance spectroscopy was used to study the sensitivity to filiform corrosion. The operating mode of this test is similar to the normalized one. The samples were scratched before inoculation for 1 h in HCl and then exposed to the humidity chamber for a maximum of 4 days. The samples were tested by EIS in an acidified 0.1 M Na₂SO₄ electrolyte solution. The resulting impedance spectra were analyzed with an appropriate equivalent electrical circuit which allows the evaluation of the exposed metallic surface area, directly related to the extent of filiform corrosion or delamination. Different parameters were varied: the exposure time in the humidity chamber; the immersion time in the electrolyte sulphate solution as well as its pH and the coating thickness.     

Metathesis as a versatile tool in oleochemistry

Olefin metathesis, awarded with the Nobel Prize in Chemistry 2005 for Chauvin, Grubbs and Schrock, has emerged as a powerful tool for organic as well as polymer chemistry. In oleochemistry, this reaction is well known and has been applied for many decades. Examples include the functionalization of the double bonds of different oleochemicals or the (direct) polymerization of plant oils via metathesis. More recent developments, particularly the development of better and more robust catalysts, allow for highly efficient cross‐metathesis reactions opening new possibilities for the direct introduction of chemical functionalities. Within this contribution, the development of metathesis in oleochemistry will be discussed, covering self‐metathesis as well as more recent developments in the field of cross‐metathesis that lead to desired platform chemicals.     

Effects of lung volume and fatigue on evoked diaphragmatic phonomyogram in normal subjects

BACKGROUND: A diaphragmatic phonomyogram (PMG) evoked by maximal phrenic nerve stimulation at end expiratory lung volume (FRC) has been previously described as a good index of changes in diaphragmatic contractility with fatigue. A study was undertaken to assess whether this conclusion could be extended to different lung volumes. METHODS: Diaphragmatic compound motor action potentials (CMAPs) were recorded on each side of the chest by the means of surface electrodes placed over the eight intercostal spaces in five healthy subjects. Diaphragmatic PMGs from both sides were recorded with condenser microphones fixed to the skin close to the CMAP recording electrodes. Oesophageal and gastric balloon tipped catheters were employed to measure transdiaphragmatic pressure twitches (TwPDI) which served as the standard measure of changes in diaphragmatic contractility. PMG and TwPDI responses were compared at different lung volumes over inspiratory capacity both before and after fatiguing inspiratory resistive loading. RESULTS: No consistent relationship was found in different subjects or on different days in the same subject between PMG and lung volume or between PMG and TwPDI. However, the PMG:CMAP ratio from both sides at any given lung volume decreased after fatigue in roughly the same proportion as the TwPDI. CONCLUSIONS: These results show that, although PMG can detect changes in diaphragmatic contractility caused by fatigue in normal subjects, lung volume changes need to be controlled and each subject should serve as his or her own control.     

An investigation of carbon nanotube jet grinding

Since their observation in 1976 and 1991, carbon nanotubes (CNTs) have generated much interest due to their properties and potential applications. CNTs are tubular carbon molecules with remarkable mechanical, electrical, chemical and thermal properties, which make them useful in various applications. Industries producing CNTs via the fluidized bed chemical vapor deposition technique face challenges related to the size of CNT bundles. The two main challenges are agglomeration and agglomerate size distribution control. A solution to these challenges involves the use of jet mills to grind the CNT agglomerates. The goal of this study was to determine whether the nanotubes could be ground with air jets using a commercial jet mill and apply a two-parameter model to describe the grinding process. The present study has indicated that air-jet grinding of CNTs is feasible with a typical commercial jet mill. This paper presents the effect of operational parameters on the arithmetic mean diameter of the ground product. Sonic velocity through the grinding nozzles was required to obtain reasonable grinding rates and relatively narrow particle size distributions. This occurs at high air to solids feedrate ratios. Additionally, a simple attrition model can describe the grinding process in the spiral jet mill.     

Electrophilic chlorination of methane over superacidic sulfated zirconia

Catalytic chlorination of methane was studied over SO ₄ ^2– /ZrO₂, Pt/SO ₄ ^2– /ZrO₂, and Fe/Mn/SO ₄ ^2– /ZrO₂ solid superacid catalysts. The reactions were carried out in a continuous flow reactor under atmospheric pressure, at temperatures below 240°C, with a gaseous hourly space velocity of 1000 ml/g h and a methane to chlorine ratio of 4 to 1. At 200°C with 30% chlorine converted the selectivity in methyl chloride exceeds 90%. At more elevated temperatures, the selectivity decreases but stays above 80% in methyl chloride at 225°C using the sulfated zirconia catalysts. The selectivity can be enhanced by adding platinum to sulfated zirconia catalysts. An iron and manganese-doped catalyst exhibited excellent selectivities at somewhat lower conversions. Methyl chloride is obtained at 235°C in selectivities greater than 85%. No chloroform or carbon tetrachloride is formed. The electrophilic insertion involves electron-deficient metal-coordinated chlorine into the methane C-H bond.Catalysis by solid superacids, 29. For part 28 see ref. [14].     

Representations by Contact and Intersection of Segments

A necessary and sufficient condition is given for a connected bipartite graph to be the incidence graph of a contact family of segments and points. We deduce that any four-connected three-colorable plane graph is the contact graph of a family of segments and that any four-colored planar graph without an induced C₄ using four colors is the intersection graph of a family of straight line segments.     

Cracking and the Indentation Size Effect for Knoop Hardness of Glasses

The Knoop hardnesses of five glasses decreased with increasing load in accordance with the classic indentation size effect (ISE). At moderate loads, cracking dramatically altered the indentation sizes and the ISE trends in three of the five glasses. Cracked indentations were as much as 10 μm longer than uncracked indentations made under identical conditions. Diagonal length readings must be corrected for optical resolution limitations if low power lenses are used.     

Internal deterioration of concrete by the oxidation of pyrrhotitic aggregates

This paper presents research results on the causes of a severe concrete deterioration, which occurred in many building foundations approximately 2 years after construction. Concrete samples were investigated with X-ray diffraction (XRD) analysis, a scanning electron microscope (SEM) and a petrographic examination performed with a stereomicroscope. It was found that the early cracking of concrete stemmed from the oxidation of the pyrrhotite found in the anorthosite aggregates used to produce the concrete. The oxidation process led to the precipitation of iron hydroxides having a higher volume than the original pyrrhotite does. The presence of micas (biotite) close to the pyrrhotite seemed to promote and accelerate the oxidation process.     

QoS aggregation for service orchestrations based on workflow pattern rules and MCDM method: evaluation at design time and runtime

Service consumers satisfaction is considered today as one of the main concern to be ensured by service providers, especially with the spread of concurrency and the increase of functionally equivalent services. This satisfaction is closely related to quality of service (QoS) perceived by service consumers. In this context, we propose an approach to determine the satisfaction degree corresponding to the QoS of service-based applications, with regard to service consumers’ QoS expectations. Our approach is based on a preference model, which is built only on the basis of service consumer’s provided information. This preference model is also based on the 2-additive Choquet operator that takes into account preferential dependencies. In this paper, we target both design time and runtime aggregation of QoS of service-based applications.