Extraction and characterization of hydroxyapatite-based materials from grey triggerfish skin and black scabbardfish bones

The conversion of food industry by-products to compounds with high added value is nowadays a significant topic, for social, environmental, and economic reasons. In this paper, calcium phosphate-based materials were obtained from black scabbardfish (Aphanopus carbo) bones and grey triggerfish (Balistes capriscus) skin, which are two of the most abundant fish by-products of Madeira Island. Different calcination temperatures between 400 and 1000°C were employed. Materials obtained from calcination of bones of black scabbard fish were composed by homogeneous mixtures of hydroxyapatite (Ca₁₀(PO4)₆(OH)₂, HAp) and β-tricalcium phosphate (β-Ca₃(PO₄)₂, β-TCP). Because of the high biocompatibility of HAp and the good resorbability of β-TCP, these natural biphasic materials could be very relevant in the field of biomaterials, as bone grafts. The ratio between HAp and β-TCP in the biphasic compound was dependent on the calcination temperature. Differently, the material obtained from skin of grey triggerfish contained HAp as the main phase, together with small amounts of other mineral phases, such as halite and rhenanite, which are known to enhance osteogenesis when used as bone substitutes. In both cases, the increase of calcination temperature led to an increase in the particles size with a consequent decrease in their specific surface area. These results demonstrate that from the fish by-products of the most consumed fishes in Madeira Island it is possible to obtain bioceramic materials with tunable composition and particle morphology, which could be promising materials for the biomedical field.     

Osteosarcoma Pathogenesis Leads the Way to New Target Treatments

Osteosarcoma (OS) is a rare condition with very poor prognosis in a metastatic setting. Basic research has enabled a better understanding of OS pathogenesis and the discovery of new potential therapeutic targets. Phase I and II clinical trials are already ongoing, with some promising results for these patients. This article reviews OS pathogenesis and new potential therapeutic targets.     

Technological and sensorial properties of liquid nitrogen ice cream enriched with protein from brewing waste (trub)

Debittered trub (brewing waste) is an important source of protein source (70.26%). Trub and whey protein were used for 5% protein enrichment of ice cream frozen by liquid nitrogen. Three formulations were elaborated: ice cream standard (ICS), ice cream with whey protein (ICW) and ice cream with trub (ICT). Chemical composition, rheological properties, texture, overrun, melting rate, scanning electron microscopy and a sensorial test were performed. Results showed that ICT presented a higher viscosity, obtained on the upward curve up to 6.76 Pa s⁻¹, consistency index (22.96 (Pa s⁻¹)ⁿ), hysteresis area (140.40 mPa s⁻¹) and hardness (31113.33 g) but a lower melting rate (0.38 g min⁻¹), overrun (13.92%) and sensorial acceptability than the other formulations. The addition of trub debittered for protein enrichment improved ice cream properties and demonstrated that it could be used as a food ingredient.     

Influence of the dispersion of Nanoclays on the cellular structure of foams based on polystyrene

In the present work blends of polystyrene (PS) with sepiolites have been produced using a melt extrusion process. The dispersion degree of the sepiolites in the PS has been analyzed by dynamic shear rheology and X-ray micro-computed tomography. Sepiolites treated with quaternary ammonium salts (O-QASEP) are better dispersed in the PS matrix than natural sepiolites (N-SEP) or sepiolites organo-modified with silane groups (O-SGSEP). A percolated network is obtained when using 6.0 wt% of O-QASEP, 8.0 wt% of N-SEP and 10.0 wt% of O-SGSEP. It has been shown that multiple extrusion processes have a negative effect on the polymer architecture. They produce a reduction in the length of the polymeric chains, and they do not lead to a better dispersion of the particles in the polymer matrix. Foams have been produced using a gas dissolution foaming process, where a strong effect of the dispersion degree on the cellular structure of the different foams was found. The effects on the cellular structure obtained by using different types of sepiolites, different contents of sepiolites and different extrusion conditions have been analyzed. The foams produced with the formulations containing O-QASEP present the lowest cell size and the most homogeneous cellular structures.     

Extracellular Vesicles in CNS Developmental Disorders

The central nervous system (CNS) is the most complex structure in the body, consisting of multiple cell types with distinct morphology and function. Development of the neuronal circuit and its function rely on a continuous crosstalk between neurons and non-neural cells. It has been widely accepted that extracellular vesicles (EVs), mainly exosomes, are effective entities responsible for intercellular CNS communication. They contain membrane and cytoplasmic proteins, lipids, non-coding RNAs, microRNAs and mRNAs. Their cargo modulates gene and protein expression in recipient cells. Several lines of evidence indicate that EVs play a role in modifying signal transduction with subsequent physiological changes in neurogenesis, gliogenesis, synaptogenesis and network circuit formation and activity, as well as synaptic pruning and myelination. Several studies demonstrate that neural and non-neural EVs play an important role in physiological and pathological neurodevelopment. The present review discusses the role of EVs in various neurodevelopmental disorders and the prospects of using EVs as disease biomarkers and therapeutics.     

Preparation and characterization of chitosan‐based dispersions

Complexation of chitosan in aqueous solutions by low molecular weight electrolytes is one of the simplest methods for the preparation of aqueous chitosan dispersions. In this work, the influence of storage time, sulfate concentration, method of preparation and surfactant content on some properties of the resultant chitosan dispersions (turbidity, viscosity and zeta potential) was analyzed. Turbidimetry was adequate to monitor the formation of particles, while viscometry was suitable to monitor changes in the dispersing phase. An analysis of the properties of these systems, mainly in terms of particle–particle and macromolecule–macromolecule interactions was carried out. Copyright © 2004 Society of Chemical Industry     

Sequential batch reactor for eucalypt kraft pulp effluent treatment with Trametes versicolor

BACKGROUND: A sequential batch reactor (SBR) was used for eucalypt kraft pulp effluent treatment with Trametes versicolor. A 2³ full factorial design and response surface methodology were applied to optimise the batch fermentation conditions. Effluent concentration, culture medium and inoculum age were the factors selected for this study in order to optimise the reduction of chemical oxygen demand (COD). RESULTS: The presence of Trametes Defined Medium (TDM) in the fermentation was required to obtain a significant COD reduction. Experiments in the batch reactor confirmed, in general, the predicted results of optimisation developed from Erlenmeyer batch assays. The T. versicolor culture remained active during 42 days of study in the SBR, providing approximately 80% of COD reduction. CONCLUSION: Trametes versicolor may be considered as very promising for the biological treatment of effluents from kraft pulp mills in an SBR system instead of the activated sludge mixed cultures traditionally used. Copyright © 2008 Society of Chemical Industry     

Self-adjusting the intensity of assortative mating in genetic algorithms

Mate selection plays a crucial role in both natural and artificial systems. While traditional Evolutionary Algorithms (EA) usually engage in random mating strategies, that is, mating chance is independent of genotypic or phenotypic distance between individuals, in natural systems non-random mating is common, which means that somehow this mechanism has been favored during the evolutionary process. In non-random mating, the individuals mate according to their parenthood or likeness. Previous studies indicate that negative assortative mating (AM)—also known as dissortative mating—, which is a specific type of non-random mating, may improve EAs performance by maintaining the genetic diversity of the population at a higher level during the search process. In this paper we present the Variable Dissortative Mating Genetic Algorithm (VDMGA). The algorithm holds a mechanism that varies the GA’s mating restrictions during the run by means of simple rule based on the number of chromosomes created in each generation and indirectly influenced by the genetic diversity of the population. We compare VDMGA not only with traditional Genetic Algorithms (GA) but also with two preceding non-random mating EAs: the CHC algorithm and the negative Assortative Mating Genetic Algorithm (nAMGA). We intend to study the effects of the different methods in the performance of GAs and verify the reliability of the proposed algorithm when facing an heterogeneous set of landscapes. In addition, we include the positive Assortative Mating Genetic Algorithm (pAMGA) in the experiments in order test both negative and positive AM mechanisms, and try to understand if and when negative AM (or DM) speeds up the search process or enables the GAs to escape local optima traps. For these purposes, an extensive set of optimization test problems was chosen to cover a variety of search landscapes with different characteristics. Our results confirm that negative AM is effective in leading EAs out of local optima traps, and show that the proposed VDMGA is at least as efficient as nAMGA when applied to the range of our problems, being more efficient in very hard functions were traditional GAs usually fail to escape local optima. Also, scalability tests have been made that show VDMGA ability to decrease optimal population size, thus reducing the amount of evaluations needed to attain global optima. We like to stress that only two parameters need to be hand-tuned in VDMGA, thus reducing the tuning effort present in traditional GAs and nAMGA.     

The Simulation of Impact Loads on Beam-type Structures using a Pseudo-dynamic Procedure

Abstract:  This study proposes an alternate method for the analysis of beams with solid cross-section or built as a framed structure and subjected to transverse impact loads from an external striker. The procedure used in the analysis is a combination of two essential tools using pseudo-dynamic techniques. The method reported here involves only one degree of freedom for the structure modelling and assumes an elastic contact between an external striker and the beam structure, which in reality does not happen. As only one degree of freedom is considered in the analysis, some important limitations are inherent to the method proposed here. Essentially, there is the difficulty of modelling the displacement field associated with the transient structure behaviour accurately, as a consequence of fast-rate impact loads. Another difficulty faced by the method refers to a local structure behaviour associated with contact loads. The present method can deal with large displacements in transversely loaded beams associated to a collapse mechanism having a simple geometry and defined with precision from a single parameter. This ensures reasonable accuracy in the evaluation of the strain energy absorbing capacity of transversely impacted beam structures using a single degree of freedom model in a pseudo-dynamic procedure.