Extraction and characterization of hydroxyapatite-based materials from grey triggerfish skin and black scabbardfish bones

The conversion of food industry by-products to compounds with high added value is nowadays a significant topic, for social, environmental, and economic reasons. In this paper, calcium phosphate-based materials were obtained from black scabbardfish (Aphanopus carbo) bones and grey triggerfish (Balistes capriscus) skin, which are two of the most abundant fish by-products of Madeira Island. Different calcination temperatures between 400 and 1000°C were employed. Materials obtained from calcination of bones of black scabbard fish were composed by homogeneous mixtures of hydroxyapatite (Ca₁₀(PO4)₆(OH)₂, HAp) and β-tricalcium phosphate (β-Ca₃(PO₄)₂, β-TCP). Because of the high biocompatibility of HAp and the good resorbability of β-TCP, these natural biphasic materials could be very relevant in the field of biomaterials, as bone grafts. The ratio between HAp and β-TCP in the biphasic compound was dependent on the calcination temperature. Differently, the material obtained from skin of grey triggerfish contained HAp as the main phase, together with small amounts of other mineral phases, such as halite and rhenanite, which are known to enhance osteogenesis when used as bone substitutes. In both cases, the increase of calcination temperature led to an increase in the particles size with a consequent decrease in their specific surface area. These results demonstrate that from the fish by-products of the most consumed fishes in Madeira Island it is possible to obtain bioceramic materials with tunable composition and particle morphology, which could be promising materials for the biomedical field.     

Technological and sensorial properties of liquid nitrogen ice cream enriched with protein from brewing waste (trub)

Debittered trub (brewing waste) is an important source of protein source (70.26%). Trub and whey protein were used for 5% protein enrichment of ice cream frozen by liquid nitrogen. Three formulations were elaborated: ice cream standard (ICS), ice cream with whey protein (ICW) and ice cream with trub (ICT). Chemical composition, rheological properties, texture, overrun, melting rate, scanning electron microscopy and a sensorial test were performed. Results showed that ICT presented a higher viscosity, obtained on the upward curve up to 6.76 Pa s⁻¹, consistency index (22.96 (Pa s⁻¹)ⁿ), hysteresis area (140.40 mPa s⁻¹) and hardness (31113.33 g) but a lower melting rate (0.38 g min⁻¹), overrun (13.92%) and sensorial acceptability than the other formulations. The addition of trub debittered for protein enrichment improved ice cream properties and demonstrated that it could be used as a food ingredient.     

Influence of the dispersion of Nanoclays on the cellular structure of foams based on polystyrene

In the present work blends of polystyrene (PS) with sepiolites have been produced using a melt extrusion process. The dispersion degree of the sepiolites in the PS has been analyzed by dynamic shear rheology and X-ray micro-computed tomography. Sepiolites treated with quaternary ammonium salts (O-QASEP) are better dispersed in the PS matrix than natural sepiolites (N-SEP) or sepiolites organo-modified with silane groups (O-SGSEP). A percolated network is obtained when using 6.0 wt% of O-QASEP, 8.0 wt% of N-SEP and 10.0 wt% of O-SGSEP. It has been shown that multiple extrusion processes have a negative effect on the polymer architecture. They produce a reduction in the length of the polymeric chains, and they do not lead to a better dispersion of the particles in the polymer matrix. Foams have been produced using a gas dissolution foaming process, where a strong effect of the dispersion degree on the cellular structure of the different foams was found. The effects on the cellular structure obtained by using different types of sepiolites, different contents of sepiolites and different extrusion conditions have been analyzed. The foams produced with the formulations containing O-QASEP present the lowest cell size and the most homogeneous cellular structures.     

Real-time organic aerosol chemical speciation in the indoor environment using extractive electrospray ionization mass spectrometry

Understanding the sources and composition of organic aerosol (OA) in indoor environments requires rapid measurements, since many emissions and processes have short timescales. However, real-time molecular-level OA measurements have not been reported indoors. Here, we present quantitative measurements, at a time resolution of five seconds, of molecular ions corresponding to diverse aerosol-phase species, by applying extractive electrospray ionization mass spectrometry (EESI-MS) to indoor air analysis for the first time, as part of the highly instrumented HOMEChem field study. We demonstrate how the complex spectra of EESI-MS are screened in order to extract chemical information and investigate the possibility of interference from gas-phase semivolatile species. During experiments that simulated the Thanksgiving US holiday meal preparation, EESI-MS quantified multiple species, including fatty acids, carbohydrates, siloxanes, and phthalates. Intercomparisons with Aerosol Mass Spectrometer (AMS) and Scanning Mobility Particle Sizer suggest that EESI-MS quantified a large fraction of OA. Comparisons with FIGAERO-CIMS shows similar signal levels and good correlation, with a range of 100 for the relative sensitivities. Comparisons with SV-TAG for phthalates and with SV-TAG and AMS for total siloxanes also show strong correlation. EESI-MS observations can be used with gas-phase measurements to identify co-emitted gas- and aerosol-phase species, and this is demonstrated using complementary gas-phase PTR-MS observations.     

Sequential batch reactor for eucalypt kraft pulp effluent treatment with Trametes versicolor

BACKGROUND: A sequential batch reactor (SBR) was used for eucalypt kraft pulp effluent treatment with Trametes versicolor. A 2³ full factorial design and response surface methodology were applied to optimise the batch fermentation conditions. Effluent concentration, culture medium and inoculum age were the factors selected for this study in order to optimise the reduction of chemical oxygen demand (COD). RESULTS: The presence of Trametes Defined Medium (TDM) in the fermentation was required to obtain a significant COD reduction. Experiments in the batch reactor confirmed, in general, the predicted results of optimisation developed from Erlenmeyer batch assays. The T. versicolor culture remained active during 42 days of study in the SBR, providing approximately 80% of COD reduction. CONCLUSION: Trametes versicolor may be considered as very promising for the biological treatment of effluents from kraft pulp mills in an SBR system instead of the activated sludge mixed cultures traditionally used. Copyright © 2008 Society of Chemical Industry     

Do individual factors matter? A survey of scientists’ patenting in Portuguese public research organisations

This paper addresses scientists’ behaviour regarding the patenting of knowledge produced in universities and other public sector research organisations (PSROs). Recent years have witnessed a rapid growth in patenting and licensing activities by PSROs. We argue that the whole process depends to a certain extent on scientists’ willingness to disclose their inventions. Given this assumption, we conduct research into individual behaviour in order to understand scientists’ views concerning the patenting of their research results. Data from a questionnaire survey of Portuguese researchers from nine PSROs in life sciences and biotechnology is presented and analysed and complemented with in-depth interviews. The results reveal that overall the scientists surveyed show a low propensity to become involved in patenting and licensing activities, despite the fact that the majority had no “ethical” objections to the disclosure of their inventions and the commercial exploitation of these. Perceptions about the impacts of these activities on certain fundamental aspects of knowledge production and dissemination are however divergent. This may account for the low participation levels. Furthermore, most scientists perceived the personal benefits deriving from this type of activity to be low. Similarly, the majority also believed that there are many difficulties associated with the patenting process and that they receive limited support from their organisations, which lack the proper competences and structures to assist with patenting and licensing.     

Individual differences in self-assessed health: An information-processing investigation of health and illness cognition.

In 2 studies, the relation between measures of self-assessed health (SAH) and automatic processing of health-relevant information was investigated. In Study 1, 84 male and 86 female undergraduate students completed a modified Stroop task. Results indicated that participants with poorer SAH showed enhanced interference effects for illness versus non-illness words. In Study 2, 27 male and 30 female undergraduate students completed a self-referent encoding task. Results offered a conceptual replication and extension of Study 1 by confirming the specificity of the relation between SAH measures and automatic processing of health (vs negative or positive general trait) information. These studies provide evidence that individual differences in SAH are reflected in schematic processing of health-relevant information. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A model material approach to the study of fracture process zone of quasi-brittle materials

A new approach to study the fracture of quasi-brittle materials is introduced: the design and testing of model materials. By model material is understood a material with enlarged microstructure and which material parameters, such as stacking and mechanical properties of particles and cohesion force, can be fully controlled. In this paper a first example to the model materials approach is presented, consisting in 5 mm steel particles bonded in a precise stacking with an epoxy-based glue. It is shown how it is possible to correlate the different fracture mechanisms and ultimate peak load of the model material to the particle pair force and to the fracture process zone size. It is also seen how a quasi-brittle behaviour is produced in the presence of mechanisms that induced the crack to shift fracture planes, that is, in presence of energy dissipative mechanisms.     

The public's knowledge about psychologists and other mental health professionals.

A random sample of New London County, Connecticut, residents received a questionnaire about 9 mental health professions or professionals (MHPs): clergyperson, marriage and family counselor, nonpsychiatric physician, psychiatrist, psychiatric nurse, psychologist, psychotherapist, social worker, and telephone crisis counselor. Respondents defined each MHP and reported their satisfaction with treatment, which MHP they would recommend, their referral source(s), licensure requirements, and fees. A mixed-design ANOVA was computed, with comfortableness as the dependent variable; age, sex, saw an MHP, and education, the between-Ss variables; and the 9 MHPs, the within-Ss variable. A significant MHP effect showed that physicians were perceived as slightly more comfortable than were psychologists (nonsignificant), who, nevertheless, were perceived as exceeding all other trained MHPs in the comfortableness experienced by their clients. (PsycINFO Database Record (c) 2010 APA, all rights reserved)