Sequential batch reactor for eucalypt kraft pulp effluent treatment with Trametes versicolor

BACKGROUND: A sequential batch reactor (SBR) was used for eucalypt kraft pulp effluent treatment with Trametes versicolor. A 2³ full factorial design and response surface methodology were applied to optimise the batch fermentation conditions. Effluent concentration, culture medium and inoculum age were the factors selected for this study in order to optimise the reduction of chemical oxygen demand (COD). RESULTS: The presence of Trametes Defined Medium (TDM) in the fermentation was required to obtain a significant COD reduction. Experiments in the batch reactor confirmed, in general, the predicted results of optimisation developed from Erlenmeyer batch assays. The T. versicolor culture remained active during 42 days of study in the SBR, providing approximately 80% of COD reduction. CONCLUSION: Trametes versicolor may be considered as very promising for the biological treatment of effluents from kraft pulp mills in an SBR system instead of the activated sludge mixed cultures traditionally used. Copyright © 2008 Society of Chemical Industry     

Head-to-head polymers: 33. Bromination of cis-1,4-polybutadiene to head-to-head poly(vinyl bromide)

Cis-1,4-polybutadiene (PB) in a 0.5% solution of a solvent mixture of dichloromethane and 1,2-dibromoethane or tetrahydrofuran was quantitatively brominated with elemental bromine at 0°C under careful exclusion of oxygen to head-to-head poly(vinyl bromide). Partially brominated PB has a structure of random or block sequences of butadiene units in the polymer depending on the bromination solvent but shows no stereospecificity in the CHBrCHBr-dyads. Partially brominated PB with block structure showed a microphase-separated morphology over a wide range of composition. Microphase separation is less pronounced for the more random structure of butadiene units. I.r and ¹³C n.m.r. spectroscopy of the partially brominated PB was used to follow the progress of the bromination.     

Biofiltration of toluene in the absence and the presence of ethyl acetate under continuous and intermittent loading

BACKGROUND: Two peat biofilters were used for the removal of toluene from air for one year. One biofilter was fed with pure toluene and the other received 1:1 (by weight) ethyl acetate:toluene mixture. RESULTS: The biofilters were operated under continuous loading: the toluene inlet load (IL) at which 80% removal occurred was 116 g m^?3 h^?1 at 57 s gas residence time. Maximum elimination capacity of 360 g m^?3 h^?1 was obtained at an IL of 745 g m^?3 h^?1. The elimination of toluene was inhibited by the presence of ethyl acetate. Intermittent loading, with pollutants supplied for 16 h/day, 5 days/week, did not significantly affect the removal efficiency (RE). Biomass was fully activated in 2 h after night closures, but 6 h were required to recover RE after weekend closures. Live cell density remained relatively constant over the operational period, while the dead cell fraction increased. Finally, a 15 day starvation period was applied and operation then re‐started. Performance was restored with similar re‐acclimatization period to that after weekend closures, and a reduction in dead cell fraction was observed. CONCLUSION: This study demonstrates the capacity of the system to handle intermittent loading conditions that are common in industrial practices, including long‐term starvation. Copyright © 2008 Society of Chemical Industry     

Entanglement network and relaxation temperature dependence of single‐site catalyzed ethylene/1‐hexene copolymers

In this work, we investigate the linear viscoelastic response of high molecular weight ethylene/1‐hexene copolymers, characterized by a narrow molecular weight distribution and comonomer content in the range from 0 to 10 mol %. A variation in the entanglement plateau modulus has been found in agreement with the recently developed packing length model. The packing model applied to viscoelastic data suggests decreased values of the characteristic ratio, accordingly with recent computer simulation results. The flow activation energy increases as the side chain content increases. This feature is thought to be related to the mobility of the molecules. The presence of side branches due to the comonomer hinders the mobility of the molecules, and increases the thermal barrier for the segmental motion. Then in the comonomer content range studied, the increase of the flow activation energy goes parallel with a decrease in the characteristic ratio. This result suggests that more parameters than only the stiffness of the chain modulate the thermal dependence of viscoelastic properties. A more refined study is necessary combining experiments with computer simulations in order to elucidate these aspects. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Conductive PE-carbon composites by elongation flow injection moulding

In Part 1 and Part 2 of this paper the preparation of linear polyethylene (PE)-carbon black processed composites with conducting electrical properties was examined by means of elongation flow injection moulding. Mould geometry was optimized in the form of oriented double-armed bars so as to give enhanced mechanical properties combined with a high degree of electrical homogeneity. The present paper deals with composites using a high molecular weight PE matrix. It is shown that the injection-moulded composite material exhibits not only a lower percolation threshold, _c, than the conventionally pressure-moulded isotropic sample, but also conductivities two to three orders of magnitude larger than the latter. The radial and axial conductivity profiles, for concentrations well above _c, are discussed in the light of the molecular orientation variations across the bars as determined by birefringence. A segregation of primary filler particles, during flow-induced orientation, into axial channels has been shown to explain the enhancement of conductivity detected in the injected mouldings. In addition, for filler concentrations near 7%, -profile analysis indicates the development of a uniform conductive-stiff inner cylinder, several millimetres wide, homogeneously extending along the full length of the injected material.     

The effect of composition on the properties of nylon 612 copolymers

The series of nylon 612 copolymers was synthesized from caprolactam (C) and laurolactam (L) at 145°C. The 50/50 C/L molar ratio copolymer was found to have the minimum melting temperature (T_m ) for the series. The glass transition temperatures (T_g 's) of the copolymers were affected by the crystallinity of the copolymers. The T_g was at a minimum for the 50/50 copolymer for crystalline samples. However, for amorphous samples there was a decrease in T_g with increasing L content. Percent crystallinity was determined by differential scanning calorimetry and X-ray techniques. It was found that the degree of crystallinity was at a minimum for copolymers of 70/30 to 40/60 C/L ratios. Coefficients of linear thermal expansion (CLTE) were obtained for the copolymers at 10°C intervals from 20 to 70°C for dry and from 20 to 50°C for samples conditioned at 50% relative humidity and 50°C. The dry samples gave lower initial values, but had a greater temperature dependence than the conditioned samples. As expected, the CLTE was found to be lowest for samples exhibiting the highest crystallinity. The tensile strengths and moduli decreased rapidly with increasing L up to the 70/30 C/L ratio after which they remained relatively constant. Elongations reached maximums between 70/30 and 40/60 C/L ratios. An inverse relationship was found between crystallinity and impact strength.     

Well-defined polymer precursors synthesized by RAFT polymerization of N,N-dimethylacrylamide/N-acryloxysuccinimide: random and block copolymers

N,N-dimethylacrylamide (DMA) and N-acryloxysuccinimide (NAS) were copolymerized by the reversible addition–fragmentation chain transfer (RAFT) polymerization technique, to obtain random and block copolymer precursors onto which different side-groups may be statistically grafted via the reactive NAS units. These reactive copolymers have interesting applications in various fields such as coatings and paints, water purification and biology. Random poly(DMA-co-NAS) copolymer chains were synthesized with a 75/25 molar ratio, high conversion, an excellent molecular weight (MW) control from 5000 to 130 000 g mol⁻¹, and low polydispersity index (M_w/M_n<1.1). Poly(DMA-b-NAS) block copolymers were synthesized by a two step method, in which a poly(DMA) homopolymer was prepared first and then used as macro-chain transfer agent to polymerize NAS. For example, a poly(DMA-b-NAS) sample was obtained with an average molecular weight of 44 300/7400 g mol⁻¹ corresponding to 447 DMA and 44 NAS units. Such block copolymers had not yet been synthesized by any controlled polymerization technique. They can be used to prepare polymers with exactly the same backbone and an increasing number of different side groups (e.g. hydrophobic, ionic or fluorescent).     

Simple procedures of choice in multicriteria problems without precise information about the alternatives’ values

The additive model of multiattribute value theory is widely used in multicriteria choice problems. But often it is not easy to obtain precise values for the scaling weights or the alternatives’ value in each function. Several decision rules which require weaker information, such as ordinal information, have been proposed to select an alternative under these circumstances. We propose new decision rules and test them using Monte-Carlo simulation, considering that there is ordinal information both on the scaling weights and on the alternatives’ values. Results show the new rules constitute a good approximation. We provide guidelines about how to use these rules in a context of selecting a subset of the most promising alternatives, considering the contradictory objectives of keeping a low number of alternatives yet not excluding the best one.     

A collaborative platform for cognitive decision making in the Knowledge Society

Two key aspects of the Knowledge Society are the interconnection between the actors involved in the decision making processes and the importance of the human factor, particularly the citizen’s continuous learning and education. This paper presents a new module devoted to knowledge extraction and diffusion that has been incorporated into a previously developed decision making tool concerning the Internet and related with the multicriteria selection of a discrete number of alternatives (PRIOR-Web). Quantitative and qualitative procedures using data and text mining methods have been employed in the extraction of knowledge. Graphical visualisation tools have been incorporated in the diffusion stage of the methodological approach suggested when dealing with decision making in the Knowledge Society. The resulting collaborative platform is being used as the methodological support for the cognitive democracy known as e-cognocracy.     

Improvement of Glycaemia and Endothelial Function by a New Low-Dose Curcuminoid in an Animal Model of Type 2 Diabetes

Curcumin has been suggested as a promising treatment for metabolic diseases, but the high doses required limit its therapeutic use. In this study, a new curcuminoid is synthesised to increase curcumin anti-inflammatory and antioxidant potential and to achieve hypoglycaemic and protective vascular effects in type 2 diabetic rats in a lower dose. In vitro, the anti-inflammatory effect was determined through the Griess reaction, and the antioxidant activity through ABTS and TBARS assays. In vivo, Goto-Kakizaki rats were treated for 2 weeks with the equimolar dose of curcumin (40 mg/kg/day) or curcuminoid (52.4 mg/kg/day). Fasting glycaemia, insulin tolerance, plasma insulin, insulin signalling, serum FFA, endothelial function and several markers of oxidative stress were evaluated. Both compounds presented a significant anti-inflammatory effect. Moreover, the curcuminoid had a marked hypoglycaemic effect, accompanied by higher GLUT4 levels in adipose tissue. Both compounds increased NO-dependent vasorelaxation, but only the curcuminoid exacerbated the response to ascorbic acid, consistent with a higher decrease in vascular oxidative and nitrosative stress. SOD1 and GLO1 levels were increased in EAT and heart, respectively. Altogether, these data suggest that the curcuminoid developed here has more pronounced effects than curcumin in low doses, improving the oxidative stress, endothelial function and glycaemic profile in type 2 diabetes.