THE effect of Srandom DOPANT fluctuation on threshold voltage and drain current variation in junctionless nanotransistors

We investigate the effect of dopant random fluctuation on threshold voltage and drain current variation in a two-gate nanoscale transistor. We used a quantum-corrected technology computer aided design simulation to run the simulation (10000 randomizations). With this simulation, we could study the effects of varying the dimensions (length and width), and thicknesses of oxide and dopant factors of a transistor on the threshold voltage and drain current in subthreshold region (off) and overthreshold (on). It was found that in the subthreshold region the variability of the drain current and threshold voltage is relatively fixed while in the overthreshold region the variability of the threshold voltage and drain current decreases remarkably, despite the slight reduction of gate voltage diffusion (compared with that of the subthreshold). These results have been interpreted by using previously reported models for threshold current variability, load displacement, and simple analytical calculations. Scaling analysis shows that the variability of the characteristics of this semiconductor increases as the effects of the short channel increases. Therefore, with a slight increase of length and a reduction of width, oxide thickness, and dopant factor, we could correct the effect of the short channel.     

Evolving an Accurate Decision Tree-Based Model for Predicting Carbon Dioxide Solubility in Polymers

Solubility is one of the most indispensable physicochemical properties determining the compatibility of components of a blending system. Research has been focused on the solubility of carbon dioxide in polymers as a significant application of green chemistry. To replace costly and time-consuming experiments, a novel solubility prediction model based on a decision tree, called the stochastic gradient boosting algorithm, was proposed to predict CO₂ solubility in 13 different polymers, based on 515 published experimental data lines. The results indicate that the proposed ensemble model is an effective method for predicting the CO₂ solubility in various polymers, with highly satisfactory performance and high efficiency. It produces more accurate outputs than other methods such as machine learning schemes and an equation of state approach.     

Dynamics and control of a thermally self-sustaining energy storage system using integrated solid oxide cells for an islanded building

A solid oxide cell-based energy system is proposed for a solar-powered stand-alone building. The system is comprised of a 5 kW_el solid oxide fuel cell (SOFC), a 9.5 kW_el solid oxide electrolysis cell (SOEC), and the required balance of plant. The SOFC supplies: 1- building demand in the absence of sufficient solar power, 2- heat for SOEC in endothermic and standby modes. Thermal integration of SOFC and SOEC is implemented through a network of heat exchangers, combined with set of control algorithms. Two control strategies were implemented to actuate the SOFC in response to endothermic heat demands of SOEC by manipulating: 1- electric power, 2- fuel utilization. The results of dynamic simulation of system for two scenarios (sunny day and cloudy day) showed successful compliance of temperature constraints with both methods. Manipulation of fuel utilization, however, resulted in better system performance in terms of efficiency and H₂ balance.     

Review of titania nanotubes: Fabrication and cellular response

Titania (TiO₂) nanotube is gaining prominence as an implantation material due to its unique properties such as high specific surface area and the ability to exhibit positive cellular response. In this paper, we briefly review the current state of fabrication methods to synthesize nanotubular TiO₂ surface topography, and discuss its effect on cellular response of different cells in terms of cell adhesion, proliferation and differentiation. In vitro and in vivo studies by using TiO₂ nanotubes are also presented establishing the potential of nanotubes in biomedical applications. Finally, an outlook of future growth of research in TiO₂ nanostructures beyond the nanotubes is provided     

The Acute Toxicity of SiO2 and Fe3O4 Nano-particles on Daphnia magna

Silicon - SiO2 nano-particles are applied in different industries such as ceramic producing, glass making, cosmetic products, medicines, magnetic mixtures, heat and electric insulators and glazing...     

The impact of U resonance elastic scattering approximations on thermal reactor Doppler reactivity

The effects of accurate modeling of neutron scattering in ²³⁸U resonances are analyzed for typical light water reactor (LWR) and next generation nuclear plant (NGNP) lattices. An exact scattering kernel is formulated and implemented in a newly developed Monte Carlo code, MCSD (Monte Carlo slowing down), which solves a neutron slowing down in an infinite homogeneous medium and is used to generate resonance integral data used in the CASMO-5 lattice physics code. It is shown that the exact scattering kernel increases LWR Doppler coefficients by ∼10% relative to the traditional assumption of asymptotic elastic downscatter for ²³⁸U resonances. These resonance modeling improvements are shown to decrease hot full power eigenvalues by ∼200 pcm for LWRs and ∼450 pcm for NGNPs.     

Morphological,mechanical, and rheological studies of PVC/ABS blends in the presence of maleic anhydride

A novel method of enhancing compatibility in PVC/ABS blends is the use of ABS‐grafted‐(maleic anhydride) (ABS‐g‐MAH) as a compatibilizer. In this study, maleic anhydride was grafted onto ABS (initiated by peroxide) in an internal mixer. Grafting degree was determined by a back‐titration method, and certain amounts of the resultant ABS‐g‐MAH were added to PVC/ABS blends during their melt blending in the mixer. The weight ratio of PVC to ABS was kept at 70:30. Evaluation of compatibilization was accomplished via tensile and notched Izod impact tests, scanning electron microscopy (SEM), and rheological studies. According to the SEM micrographs, better dispersion of the rubber phase and its finer size in properly compatibilized blends were indications of better compatibility. Besides, in the presence of a proper amount [5 parts per hundred parts of PVC (php)] of ABS‐g‐MAH, PVC/ABS blends showed significantly higher impact strengths than uncompatibilized blends. This result, in turn, would be an indication of better compatibility. In the presence of 5 php of compatibilizer, the higher complex viscosity and storage modulus, as well as a lower loss modulus and loss factor in the range of frequency studied, indicated stronger interfacial adhesion as a result of interaction between maleic anhydride and the PVC‐SAN matrix. J. VINYL ADDIT. TECHNOL., 2010. © 2010 Society of Plastics Engineers     

Effect of organo‐modified layered silicates on flammability performance of high‐density polyethylene/rice husk flour nanocomposite

This research was carried out to investigate on the effect of organomodified montmorillonite (OMMT) on the flame retarding characteristics and clay dispersion of composites based on high‐density polyethylene and rice husk flour. To meet this objective, the blend nanocomposites were prepared through the melt mixing of high‐density polyethylene and rice husk flour at 50% weight ratios, with various amounts of OMMT (0, 2, 4, and 6 per hundred compounds) in Hakee internal mixer; then, the samples were made by injection molding. Results indicated that the burning rate, total smoke production, and heat release rate of samples decreased with increasing the OMMT content. Also, the char residue and time to ignition increased with increasing the nanoclay loading. X‐ray diffraction patterns revealed that the nanocomposites formed were intercalated. Also, morphological findings showed that samples containing 2 per hundred compounds of OMMT had higher order of intercalation and better dispersion. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Energy and exergy analysis of internal reforming solid oxide fuel cell–gas turbine hybrid system

The aim of this work is to analyze methane-fed internal reforming solid oxide fuel cell–gas turbine (IRSOFC—GT) power generation system based on the first and second law of thermodynamics. Exergy analysis is used to indicate the thermodynamic losses in each unit and to assess the work potentials of the streams of matter and of heat interactions. The system consists of a prereformer, a SOFC stack, a combustor, a turbine, a fuel compressor and air compressor, recuperators and a heat recovery steam generator (HRSG). A parametric study is also performed to evaluate the effect of various parameters such as fuel flow rate, air flow rate, temperature and pressure on system performance.     

Metastatic basal-cell carcinoma

Three cases of metastatic basal-cell carcinoma are reported. All of the cases were relatively small when compared with other lesions reported in the literature. With early chemosurgical treatment of small recurrent carcinomas, metastasizing basal-cell carcinoma will be a condition of the past.