An agile model for the eco-design of electric vehicle Li-ion batteries

Numerous design choices need to be made at several levels when designing high-tech products: technology, processes, architecture, components, materials… and these choices need to be made in relation to the product life cycle with the corresponding experts for each stage of the life cycle. At the same time, to ensure product sustainability, a specific focus on the future potential environmental impacts is highly recommended. In this research, an agile model is proposed to help designers make decisions while monitoring environmental performance indicators of high-tech solutions. The concept of Critical Product Life Cycle Parameters had to be introduced to facilitate the eco-design of the final product. The approach is illustrated by the Electric Vehicle Li-Ion Batteries case study.     

Electrospun fiber membranes from blends of poly(vinylidene fluoride) with fouling‐resistant zwitterionic copolymers

Nonwoven super‐hydrophobic fiber membranes have potential applications in oil–water separation and membrane distillation, but fouling negatively impacts both applications. Membranes were prepared from blends comprising poly(vinylidene fluoride) (PVDF) and random zwitterionic copolymers of poly(methyl methacrylate) (PMMA) with sulfobetaine methacrylate (SBMA) or with sulfobetaine‐2‐vinylpyridine (SB2VP). PVDF imparts mechanical strength to the membrane, while the copolymers enhance fouling resistance. Blend composition was varied by controlling the PVDF‐to‐copolymer ratio. Nonwoven fiber membranes were obtained by electrospinning solutions of PVDF and the copolymers in a mixed solvent of N,N‐dimethylacetamide and acetone. The PVDF crystal phases and crystallinities of the blends were studied using wide‐angle X‐ray diffraction and differential scanning calorimetry (DSC). PVDF crystallized preferentially into its polar β‐phase, though its degree of crystallinity was reduced with increased addition of the random copolymers. Thermogravimetry (TG) showed that the degradation temperatures varied systematically with blend composition. PVDF blends with either copolymer showed significant increase of fouling resistance. Membranes prepared from blends containing 10% P(MMA‐ran‐SB2VP) had the highest fouling resistance, with a fivefold decrease in protein adsorption on the surface, compared to homopolymer PVDF. They also exhibited higher pure water flux, and better oil removal in oil–water separation experiments. © 2018 Society of Chemical Industry     

Effect of thermal history on mechanical properties of polyetheretherketone below the glass transition temperature

Tensile properties of polyethertherketone (PEEK) have been studied at 125, 25, and ?100°C for thin films prepared with different thermal histories. Initial morphology was controlled by rate of cooling from the melt. Amorphous films resulted from quenching the melt, while semicrystalline films were obtained by cooling the melt at different rates, or by crystallization of the rubbery amorphous state. The films were characterized using density, X-ray scattering, differential scanning calorimetry, and infrared spectroscopy. Scanning electron microscopy was used to examine fracture surfaces. Degree of crystallinity and rate of cooling from the melt affected the tensile properties at all test temperatures. For films with nearly the same degree of crystallinity, those which were more slowly cooled from the melt fractured at the lowest strain. The amorphous films were most tough, drawing to 233% at ?100°C and to over 500% at 125°C. Films crystallized from the rubbery amorphous state had stress–strain behavior intermediate between that of the amorphous and melt-crystallized films at all test temperatures. Density measurements on the drawn material indicate that void formation occurs simultaneously with the formation of fibrillar crystals. Necking resulted in density increases for amorphous films, and density decreases for the semicrystalline films.     

Gel-drawn fibres of poly(vinyl alcohol)

Semi-crystalline gels of several samples of poly(vinyl alcohol) were made from solutions in which the polymer concentration varied from 2.0 to 15.0%. Entanglement density in the material was in this way reduced from the melt entanglement density. When gels were partially dried and drawn isothermally the maximum draw ratio increased with drawing temperature up to 11 to 14 at 140 to 180 C. A meltcast film could be drawn to 6.8 times at 140 C. Drawn material had a crystallinity of 55 to 80%, while that of isotropic material was 20 to 55%. Gels of lower initial concentration (lower entanglement density) could be drawn to greater extensions at a given draw temperature and had better mechanical properties. Young's modulus increased with draw ratio to values very close to those for polyethylene fibres drawn by the same amount. Young's modulus was independent of drawing temperature or degree of crystallinity, but on comparing drawn gels of the same draw ratio, crystallinity and crystalline orientation, those of lower entanglement density had a higher Young's modulus.     

Gait analysis of low-cost flexible-shank transtibial prostheses.

The latest lower-limb prosthetic designs have been incorporated with dynamic elastic response (DER) components to enhance prosthesis flexibility, which are suggested to be beneficial to gait. Although DER prosthetic. feet are preferred by most transtibial amputees and their benefits to gait are supported by some biomechanical studies, many are still utilizing the simple conventional solid ankle cushioned heel (SACH) designs because of the lower cost. The monolimb, a transtibial prosthesis with the socket and the shank molded from a single piece of thermoplastic material, perhaps is an alternative to DER feet for providing flexibility at the shank. In addition to shank flexibility, low cost and light weight are other characteristics of monolimbs. In spite of the potential benefits, little analysis has been done to examine the simple-structured monolimb prosthesis. The main aim of this study is to evaluate the gait and perception of unilateral transtibial amputees using a flexible elliptical-shank monolimb as compared to a thicker circular-shank monolimb and a conventional rigid-shank prosthesis. Results suggested that a properly designed monolimb may potentially offer similar functional advantages to the relatively expensive DER feet.     

A model of a decision support system based on case-based reasoning for third-party logistics evaluation

The social demands for third‐party logistics (3PL) are further developing the model of supply chain management. The analysis of an effective approach for 3PL service supplier evaluation is given in terms of its direct relation to the operational efficiency and benefit of the service‐demanding enterprise as well as its supply chain management. An analysis of the traditional academic theoretical results and practical methods for 3PL supplier selection indicates the deficiencies of this approach. In this paper, a case‐based reasoning model framework is postulated for a 3PL evaluation and selection system. This work further expands upon the theoretical basis of this system and its reasoning process by discussing the advantages and practical value of this framework.     

Some Sources of Residential Satisfaction in an Urban Slum

Urban renewal planning has assumed that social benefits would accrue to the former residents of slums. But the meanings that the slum areas have for their residents and the consequent effects that relocation would have for them have not been adequately understood. Prior to being located from Boston's West End redevelopment area, most residents experienced profound satisfaction from living in the area. Their satisfaction derived, in large part, from the close associations maintained among the local people and from their strong sense of identity to the local places. In turn, people and places provided a framework for personal and social integration.