Formulation of sage essential oil (Salvia officinalis,L.) monoterpenes into chitosan hydrogels and permeation study with GC-MS analysis

This study deals with the formulation of natural drugs into hydrogels. For the first time, compounds from the sage essential oil were formulated into chitosan hydrogels. A sample preparation procedure for hydrophobic volatile analytes present in a hydrophilic water matrix along with an analytical method based on the gas chromatography coupled with the mass spectrometry (GC-MS) was developed and applied for the evaluation of the identity and quantity of essential oil components in the hydrogels and saline samples. The experimental results revealed that the chitosan hydrogels are suitable for the formulation of sage essential oil. The monoterpene release can be effectively controlled by both chitosan and caffeine concentration in the hydrogels. Permeation experiment, based on a hydrogel with the optimized composition [3.5% (w/w) sage essential oil, 2.0% (w/w) caffeine, 2.5% (w/w) chitosan and 0.1% (w/w) Tween-80] in donor compartment, saline solution in acceptor compartment, and semi-permeable cellophane membrane, demonstrated the useful permeation selectivity. Here, (according to lipophilicity) an enhanced permeation of the bicyclic monoterpenes with antiflogistic and antiseptic properties (eucalyptol, camphor and borneol) and, at the same time, suppressed permeation of toxic thujone (not exceeding its permitted applicable concentration) was observed. These properties highlight the pharmaceutical importance of the developed chitosan hydrogel formulating sage essential oil in the dermal applications.     

Graphite Oxide and Aromatic Amines: Size Matters

Experimental and theoretical studies are performed in order to illuminate, for first time, the intercalation mechanism of polycyclic aromatic molecules into graphite oxide. Two representative molecules of this family, aniline and naphthalene amine are investigated. After intercalation, aniline molecules prefer to covalently connect to the graphene oxide matrix via chemical grafting, while napthalene amine molecules bind with the graphene oxide surface through π–π interactions. The presence of intercalated aromatic molecules between the graphene oxide layers is demonstrated by X‐ray diffraction, while the type of interaction between graphene oxide and polycyclic organic molecules is elucidated by X‐ray photoelectron spectroscopy. Combined quantum mechanical and molecular mechanical calculations describe the intercalation mechanism and the aniline grafting, rationalizing the experimental data. The present work opens new perspectives for the interaction of various aromatic molecules with graphite oxide and the so‐called “intercalation chemistry”.     

Requirements engineering in health care: the example of chemotherapy planning in paediatric oncology

Health care is characterized by highly complex processes of patient care that require unusual amount of communication between different health care professionals of different institutions. Sub-optimal processes can significantly impact on the patient’s health, increase the consumption of services and resources and in severe cases can lead to the patient death. For these reasons, requirements engineering for the development of information technology in health care is a complex process as well: without constant and rigorous evaluation, the impact of new systems on the quality of care is unknown and it is possible that badly designed systems significantly harm patients. To overcome these limitations, we present and discuss an approach to requirements engineering that we applied for the development of applications for chemotherapy planning in paediatric oncology. Chemotherapy planning in paediatric oncology is complex and time-consuming and errors must be avoided by all means. In the multi-hospital/multi-trial-centre environment of paediatric oncology, it is especially difficult and time-consuming to analyse requirements. Our approach combines a grounded theory approach with evolutionary prototyping based on the constant development and refinement of a generic domain model, in this case a domain model for chemotherapy planning in paediatric oncology. The prototypes were introduced in medical centres and final results show that the developed generic domain model is adequate.     

General properties of antennas

In antenna design there are some fundamental relationships based on reciprocity. The equivalence of antenna pattern in transmission and reception is well known. Less well known is the time-derivative relationship going from reception to transmission. These relationships are derived here and expressed in various useful forms. Electric and magnetic dipoles are given special consideration, and the combined form constructed as a terminated TEM transmission line (the BTW antenna) is discussed for its transmission and reception properties     

On the non-destructive detection of fatigue damage in industrial aluminium alloys by positron annihilation

The average positron lifetime has been determined non-destructively and in-situ during fully symmetric push-pull fatigue experiments in the bulk material of the aluminium alloys 2024 T3 and 7075 T6 using a servo-hydraulic fatigue testing system equipped with a mobile positron beam produced by a ⁷²Se/⁷²As generator (initial activity of ≈ 0.9 MBq; average positron penetration depth ≥1 mm). Contrary to earlier investigations on stainless steel using the same experimental approach, no variation of the average positron lifetime could be observed during fatigue and neither early nor late stages of fatigue damage could be revealed. It is concluded that fatigue induced changes of the defect spectra in technologically relevant aluminium alloys are masked for the present method by saturation trapping in precipitates. A sufficiently high increase of the dislocation density and the creation of vacancy clusters must be confined to the vicinity of propagating fatigue cracks or the fatal fatigue crack. Therefore the zone with sufficient detectable fatigue damage has not enough statistical weight to modify the average positron lifetime of the aluminium alloy bulk material.     

Methods for packet combining in HARQ systems over bursty channels

The performance of ARQ systems can be improved by combining current and prior transmissions at the receiver. Two techniques for combining outputs in a packet-based communication system are presented. In both techniques the fundamental unit of retransmission is a packet, and the fundamental unit of combining is a codeword. The techniques are analyzed for a bursty channel and a system that employs Reed–Solomon coding and bounded-distance errors-and-erasures decoding. Performance results show that the packet-combining schemes provide significant gains in throughput and reductions in error probability when compared with a system that does not employ combining. This revised version was published online in June 2006 with corrections to the Cover Date.     

Creating and Justifying Research and Development Value: Scope,Scale, Skill and Social Networking of R&D

In this paper we describe a framework for analysing the creation and justification of Research & Development. The 4S framework is developed for analysing the scope, scale, skills and social network aspects of Research & Development value. The framework is based on social system theory, a process contingency model, and recent Research & Development metrics. We present a first empirical assessment based on a workshop using the 4S framework for leveraging Research & Development. Results that assist in the assessment of value creation utilising R & D within networks are very relevant in high tech industries. The multi–dimensional process approach of this framework seems promising for understanding and managing R&D value creation, but needs further operationalisation. Case studies are described and a Dutch network on leveraging R&D has been initiated.