Local acceptance of wind energy: Factors of success identified in French and German case studies

The objective of this paper is to identify and analyse factors that are important for winning acceptance of wind-energy parks on the local level. The developers of wind-energy parks need to know how to manage “social acceptance” at the different stages of planning, realisation and operation. Five case studies in France and Germany focused on factors of success in developing a wind-energy project on a given site and illuminated how policy frameworks influence local acceptance. Our hypothesis is that these factors fall into two categories: institutional conditions, such as economic incentives and regulations; and site-specific conditions (territorial factors), such as the local economy, the local geography, local actors, and the actual on-site planning process (project management).     

Integration of the fuzzy logic with chaos theory approaches in simulation and optimization of reliability

It is shown that the combined use of fuzzy logic and chaos theory provides a convenient approach to the simulation of the dynamics of system reliability in the space of parameters related to failure causes. Based on a combination of the membership functions and the chaos generator in the form of the logistic map, bifurcation diagrams for the system reliability with validation and correction are obtained. It is proved that an increase in the multiplicity of validation and improvement of its quality put off the onset of the first bifurcation causing the loss of reliability and decreases the size of the orbit around which the reliable state membership level fluctuates. The multiplicity of validation optimization problem under the condition of the parameter chaotic fluctuations is stated; an example of the solution of this problem is discussed. The possibility of designing chaos stable systems with the pre-scribed reliability level is justified.     

Storage life of frozen salmonoids Effect of light and packaging conditions on carotenoid oxidation and lipid oxidation

Summary The combined effect of oxygen transmission of packaging material and of exposure to light with different spectral distribution on the oxidative degradation of carotenoids and lipids in frozen salmonoids has been characterized in a storage experiment with steaks of rainbow trout. The degradation of the carotenoid astaxanthin, as followed by HPLC analysis and tristimulus colorimetric measurement, was sensitive to the radiant flux density of UV light and less sensitive to the oxygen transmission rate of the packaging material, in agreement with previous findings for photooxidation of carotenoids in food model systems. This is in contrast to the lipid oxidation, which was found to be dependent on the accessability of oxygen rather than on exposure to UV light. Formation of peroxides in the product culminated after 3 months of storage (up to 8.4 mEq kg^–1 oil), and preceded the formation of thiobarbituric-acid-reactive substances. The product in packaging material with a high oxygen transmission rate (60 cm³ m^–2 bar^–1 per 24 h) reached a level of approximately 5 mol malonaldhyde/kg^–1 product, when stored exposed to standard fluorescent light or fluorescent light with a high UV component. Rancid taste was not detected by sensory evaluation for any of the products after 6 months of storage, whereas a bitter taste was noted for the product exposed to UV light.

---

Die Haltbarkeit von Lachsforellen Einfluß von Licht und Verpackung auf die Carotenoid- und Fettoxydation

Zusammenfassung Der kombinierte Effekt von Sauerstoffdurchgang durch Verpackungsmaterial und der Lichteinwirkung verschiedener spektraler Verteilung auf den oxidativen Abbau der Carotinoide und Fette in gefrorenen Lachsforellen wurde in einem Lagerungsversuch untersucht. Der Abbau des Carotenoids Astaxanthin wurde mit HPLC undTristimulus-Calorimetrie beobachtet, und war empfindlich gegenüber UV-Licht und weniger empfindlich gegenüber der Sauerstoffdurchlässigkeit der Verpackung, was mit früheren Ergebnissen für Photooxidation der Carotinoide in Modellsystemen übereinstimmt. Dies widerspricht der Fettoxidation, die mehr von Sauerstoffzugang abhängig ist als von der Entwicklung des UV-Lichtes. Die Bildung von Peroxiden des Produktes kuliminierte nach 3monatiger Lagerung (bis 8,4 meq/kg Öl) und ging der Bildung von Thiobarbitursäure-aktiven Substanzen voraus. Das Produkt im Material mit hohem Sauerstoffdurchgang (60 cm³ m^–2 bar^–1 pro 24 h), das bei normalen fluorescierendem Licht oder bei fluorescierendem Licht mit hohem UV-Anteil aufbewahrt wurde, erreichte einen TBS-Wert von ungefähr 5 mol Malonaldehyd/kg Fleisch. Ein ranziger Geschmack wurde durch sensorische Bewertung nach 6monatiger Lagerung nicht erkannt, wohl aber ein bitterer Geschmack bei dem UV-Licht ausgesetzten Proben.

     

Characterisation of three different impellers using the LDV-technique

A characterisation of three commonly used impellers was made in this study by measuring local mean velocities and the fluctuations of these velocities with the LDV technique. The data was used to estimate volumetric flow, velocity fluctuations and turbulent intensity in the impeller region of the tank. The impellers investigated were a high flow impeller, a pitched blade turbine and a Rushton turbine. The cylindrical vessel used was made of Perspex, had a dished bottom (DIN 28013), was equipped with four baffles and had an inner diameter of 0.45 m. It was found that the bulk velocities could be scaled with the tip-speed of the impeller (ND). The flow rate at constant impeller speed increased in the order high flow impeller — Rushton turbine — pitched blade turbine. The corresponding order for the turbulence fluctuation is: high flow impeller — pitched blade turbine — Rushton turbine. The velocity profile of the flow out from the high flow impeller was furthermore, not as smooth as could be expected.     

Reliability Analysis: from Fault Tree to Catastrophe Tree

Journal of Computer and Systems Sciences International - In this paper, we propose a method for analyzing a catastrophe tree that is an analog of the classical method for analyzing a fault tree,...     

Fuzzy algorithmic simulation of reliability: Control and correction resource optimization

Fuzzy models of reliability of algorithmic procedure based on membership functions that depend on parameters affecting the algorithm correct performance are considered. Statements of optimization problems of correction and control resources of linear algorithms with respect to reliability-cost criteria are formalized. The solution of the stated problems is illustrated by an example. The novelty of the approach consists in the fact that it does not use any statistical data and optimize parametric reliability of the system by choosing the control and correction resources in order to ensure the required or maximal possible correction level of performance for the given instability of input parameters.     

Modeling of the human operator reliability with the aid of the Sugeno fuzzy knowledge base

Whenever a problem to predict and ensure reliability of human-machine systems is posed, regression models are usually applied to evaluate the influence of different factors on faultlessness, exactitude, operating speed, and other characteristics of the operator performance. The Sugeno fuzzy knowledge bases are proposed to model multi-factor relations of reliability. It is shown that this approach allows to combine expert knowledge and analytical relations of the parametric reliability theory in operator activity models. The expert component of a model provides with a comprehensive interpretation, while analytical input-output relations make a model compact. Appropriate examples are presented to demonstrate advantages of the Sugeno knowledge base application to describe multi-factor reliability relations of human operator.     

Cause and effect analysis by fuzzy relational equations and a genetic algorithm

This paper proposes using a genetic algorithm as a tool to solve the fault diagnosis problem. The fault diagnosis problem is based on a cause and effect analysis which is formally described by fuzzy relations. Fuzzy relations are formed on the basis of expert assessments. Application of expert fuzzy relations to restore and identify the causes through the observed effects requires the solution to a system of fuzzy relational equations. In this study this search for a solution amounts to solving a corresponding optimization problem. An optimization algorithm is based on the application of genetic operations of crossover, mutation and selection. The genetic algorithm suggested here represents an application in expert systems of fault diagnosis and quality control.     

How to Build Up an Infrastructure for Intercultural Usability Engineering

Siemens is a global enterprise that sells its products in more than 190 countries throughout the world. This internationalization of products means more than just translating the operating instructions and making changes to formats. True adaptation goes much deeper and takes into account different requirements in terms of functionality. This article starts by defining the term culture and then considers the requirements that have to be met in the context of intercultural usability engineering. Taking the establishment of usability laboratories in Beijing, China and Princeton, New Jersey as examples, the article then presents the challenges facing international cooperation and possible solutions, taking a detailed look at differences in the infrastructure, at key qualifications in international cooperation, and at the development of appropriate test methods.