Tamquam alter idem: formal similarities in a subset of reports on anti-inflammatory compounds in the years 2008–2019

Scientometrics - A literature search on the in vitro testing of anti-inflammatory compounds of natural origin revealed a considerable number of studies adopting a similar template for data...     

La0.6Sr0.4Co0.2Fe0.8O3-δ nanofiber cathode for intermediate-temperature solid oxide fuel cells by water-based sol-gel electrospinning: Synthesis and electrochemical behaviour

Water-based sol-gel electrospinning is employed to manufacture perovskite oxide La_0.6Sr_0.4Co_0.2Fe_0.8O_3-δ (LSCF) nanofiber cathodes for intermediate-temperature solid oxide fuel cells. LSCF fibrous scaffolds are synthesized through electrospinning of a sol-gel solution employing water as the only solvent. Morphological characterizations demonstrate that the LSCF fibers have highly crystalline structure with uniform elemental distribution. After heat treatment, the average fiber diameter is 250 nm and the porosity of the nanofiber tissue is 37.5 %. The heat treated LSCF nanofibers are applied directly onto a Ce_0.9Gd_0.1O_1.95 (CGO) electrolyte disk to form a symmetrical cell. Electrochemical characterization is carried out through electrochemical impedance spectroscopy (EIS) in the temperature range 550?°C–950?°C, and reproducibility of the electrochemical performance for a series of cells is demonstrated. At 650?°C, the average measured polarization resistance R_p is 1.0 Ω cm². Measured performance decay is 1 % during the first 33?h of operation at 750?°C, followed by an additional 0.7 % over the subsequent 70?h.     

The impacts of a GTL plant on Brazil's oil products supply and refinery expansion

This paper assesses the impacts of a GTL plant on the expansion of Brazil's oil refining segment. The GTL plant (50,000 bpd) was sized to start up operations in 2015, producing diesel and naphtha through the indirect route (FT-synthesis). This plant will consume the non-associated natural gas production from the recent discoveries at the Santos Basin (around 419 Bm³), and the associated gas production from the Campos Basin. Both basins are located in the Southeast of Brazil, the most populated, rich and industrialized region of the country. Two different criteria for refinery expansion were simulated in order to meet oil product demand scenarios. Findings show that depending on the refinery expansion criteria considered GTL will play a fundamental hole to meet the oil product demand forecast to Brazil in the next 10 years.     

Local acceptance of wind energy: Factors of success identified in French and German case studies

The objective of this paper is to identify and analyse factors that are important for winning acceptance of wind-energy parks on the local level. The developers of wind-energy parks need to know how to manage “social acceptance” at the different stages of planning, realisation and operation. Five case studies in France and Germany focused on factors of success in developing a wind-energy project on a given site and illuminated how policy frameworks influence local acceptance. Our hypothesis is that these factors fall into two categories: institutional conditions, such as economic incentives and regulations; and site-specific conditions (territorial factors), such as the local economy, the local geography, local actors, and the actual on-site planning process (project management).     

A fuzzy clustering algorithm enhancing local model interpretability

In this work, simple modifications on the cost index of particular local-model fuzzy clustering algorithms are proposed in order to improve the readability of the resulting models. The final goal is simultaneously providing local linear models (reasonably close to the plant’s Jacobian) and clustering in the input space so that desirable characteristics (regarding final model accuracy, and convexity and smoothness of the cluster membership functions) are improved with respect to other proposals in literature. Some examples illustrate the proposed approach.     

Relaxed stability and performance conditions for Takagi-Sugeno fuzzy systems with knowledge on membership function overlap.

This correspondence presents a relaxation of some earlier linear matrix inequality (LMI) conditions, which allow setting up less conservative stability or performance conditions for Takagi-Sugeno fuzzy models. Unlike the previous literature, this correspondence takes into account the knowledge of the membership functions' shape by considering bounds on them and their cross products (interpreted as an overlap measure), introducing auxiliary LMI variables. Numerical examples illustrate the achieved improvements.     

Storage life of frozen salmonoids Effect of light and packaging conditions on carotenoid oxidation and lipid oxidation

Summary The combined effect of oxygen transmission of packaging material and of exposure to light with different spectral distribution on the oxidative degradation of carotenoids and lipids in frozen salmonoids has been characterized in a storage experiment with steaks of rainbow trout. The degradation of the carotenoid astaxanthin, as followed by HPLC analysis and tristimulus colorimetric measurement, was sensitive to the radiant flux density of UV light and less sensitive to the oxygen transmission rate of the packaging material, in agreement with previous findings for photooxidation of carotenoids in food model systems. This is in contrast to the lipid oxidation, which was found to be dependent on the accessability of oxygen rather than on exposure to UV light. Formation of peroxides in the product culminated after 3 months of storage (up to 8.4 mEq kg^–1 oil), and preceded the formation of thiobarbituric-acid-reactive substances. The product in packaging material with a high oxygen transmission rate (60 cm³ m^–2 bar^–1 per 24 h) reached a level of approximately 5 mol malonaldhyde/kg^–1 product, when stored exposed to standard fluorescent light or fluorescent light with a high UV component. Rancid taste was not detected by sensory evaluation for any of the products after 6 months of storage, whereas a bitter taste was noted for the product exposed to UV light.

---

Die Haltbarkeit von Lachsforellen Einfluß von Licht und Verpackung auf die Carotenoid- und Fettoxydation

Zusammenfassung Der kombinierte Effekt von Sauerstoffdurchgang durch Verpackungsmaterial und der Lichteinwirkung verschiedener spektraler Verteilung auf den oxidativen Abbau der Carotinoide und Fette in gefrorenen Lachsforellen wurde in einem Lagerungsversuch untersucht. Der Abbau des Carotenoids Astaxanthin wurde mit HPLC undTristimulus-Calorimetrie beobachtet, und war empfindlich gegenüber UV-Licht und weniger empfindlich gegenüber der Sauerstoffdurchlässigkeit der Verpackung, was mit früheren Ergebnissen für Photooxidation der Carotinoide in Modellsystemen übereinstimmt. Dies widerspricht der Fettoxidation, die mehr von Sauerstoffzugang abhängig ist als von der Entwicklung des UV-Lichtes. Die Bildung von Peroxiden des Produktes kuliminierte nach 3monatiger Lagerung (bis 8,4 meq/kg Öl) und ging der Bildung von Thiobarbitursäure-aktiven Substanzen voraus. Das Produkt im Material mit hohem Sauerstoffdurchgang (60 cm³ m^–2 bar^–1 pro 24 h), das bei normalen fluorescierendem Licht oder bei fluorescierendem Licht mit hohem UV-Anteil aufbewahrt wurde, erreichte einen TBS-Wert von ungefähr 5 mol Malonaldehyd/kg Fleisch. Ein ranziger Geschmack wurde durch sensorische Bewertung nach 6monatiger Lagerung nicht erkannt, wohl aber ein bitterer Geschmack bei dem UV-Licht ausgesetzten Proben.

     

Characterisation of three different impellers using the LDV-technique

A characterisation of three commonly used impellers was made in this study by measuring local mean velocities and the fluctuations of these velocities with the LDV technique. The data was used to estimate volumetric flow, velocity fluctuations and turbulent intensity in the impeller region of the tank. The impellers investigated were a high flow impeller, a pitched blade turbine and a Rushton turbine. The cylindrical vessel used was made of Perspex, had a dished bottom (DIN 28013), was equipped with four baffles and had an inner diameter of 0.45 m. It was found that the bulk velocities could be scaled with the tip-speed of the impeller (ND). The flow rate at constant impeller speed increased in the order high flow impeller — Rushton turbine — pitched blade turbine. The corresponding order for the turbulence fluctuation is: high flow impeller — pitched blade turbine — Rushton turbine. The velocity profile of the flow out from the high flow impeller was furthermore, not as smooth as could be expected.     

Non-intrusive Coupling: Recent Advances and Scalable Nonlinear Domain Decomposition

This paper provides a detailed review of the global/local non-intrusive coupling algorithm. Such method allows to alter a global finite element model, without actually modifying its corresponding numerical operator. We also look into improvements of the initial algorithm (Quasi-Newton and dynamic relaxation), and provide comparisons based on several relevant test cases. Innovative examples and advanced applications of the non-intrusive coupling algorithm are provided, granting a handy framework for both researchers and engineers willing to make use of such process. Finally, a novel nonlinear domain decomposition method is derived from the global/local non-intrusive coupling strategy, without the need to use a parallel code or software. Such method being intended to large scale analysis, we show its scalability. Jointly, an efficient high level Message Passing Interface coupling framework is also proposed, granting an universal and flexible way for easy software coupling. A sample code is also given.