System approach to modeling of liver glucose metabolism with physiologically interpreted model parameters outgoing from [18F]FDG concentrations measured by PET

New mathematical models from physiologically interpreted parameters capable of evaluating glucose metabolism within the liver and/or the whole body were developed. The group of pigs in a fasting state and the group of pigs with euglycemic supraphysiological hyperinsulinemia were scanned by positron emission tomography after a single dose of [(18)F]FDG tracer. Simultaneously frequent sampling of the dynamic data of [(18)F]FDG plasma concentration in artery, portal vein and hepatic vein was obtained. A system approach to the liver and/or the whole-body system by the tools of linear dynamic sysztem theory was used. Three kinds of structural models, single input and single output or multiple outputs and multiple inputs and single output, were identified. Differences between the group of fasting pigs and the group of pigs in euglycemic supraphysiological hyperinsulinemia were identified by estimated parameters of the structural models. The suitability of the structural mathematical models for the estimation of physiologically interpreted parameters from PET was validated.     

Bivalent EGFR-Targeting DARPin-MMAE Conjugates

Epidermal growth factor receptor (EGFR) is a validated tumor marker overexpressed in various cancers such as squamous cell carcinoma (SSC) of the head and neck and gliomas. We constructed protein-drug conjugates based on the anti-EGFR Designed Ankyrin Repeat Protein (DARPin) E01, and compared the bivalent DARPin dimer (DD1) and a DARPin-Fc (DFc) to the monomeric DARPin (DM) and the antibody derived scFv425-Fc (scFvFc) in cell culture and a mouse model. The modular conjugation system, which was successfully applied for the preparation of protein-drug and -dye conjugates, uses bio-orthogonal protein-aldehyde generation by the formylglycine-generating enzyme (FGE). The generated carbonyl moiety is addressed by a bifunctional linker with a pyrazolone for a tandem Knoevenagel reaction and an azide for strain-promoted azide-alkyne cycloaddition (SPAAC). The latter reaction with a PEGylated linker containing a dibenzocyclooctyne (DBCO) for SPAAC and monomethyl auristatin E (MMAE) as the toxin provided the stable conjugates DD1-MMAE (drug-antibody ratio, DAR = 2.0) and DFc-MMAE (DAR = 4.0) with sub-nanomolar cytotoxicity against the human squamous carcinoma derived A431 cells. In vivo imaging of Alexa Fluor 647-dye conjugates in A431-xenografted mice bearing subcutaneous tumors as the SCC model revealed unspecific binding of bivalent DARPins to the ubiquitously expressed EGFR. Tumor-targeting was verified 6 h post-injection solely for DD1 and scFvFc. The total of four administrations of 6.5 mg/kg DD1-MMAE or DFc-MMAE twice weekly did not cause any sequela in mice. MMAE conjugates showed no significant anti-tumor efficacy in vivo, but a trend towards increased necrotic areas (p = 0.2213) was observed for the DD1-MMAE (n = 5).     

Levels of mycotoxins and sample cytotoxicity of selected organic and conventional grain-based products purchased from Finnish and Italian markets

The contamination levels of 16 different Fusarium- and Aspergillus-mycotoxins were chemically determined from randomly selected organic and conventional grain-based products purchased from Finnish and Italian markets. The cytotoxicity of the samples was analyzed with an in vitro test using feline fetal lung cells. Overall, the concentrations of the mycotoxins studied were low in all of the samples. Enniatins B and B1 as well as deoxynivalenol were the most predominant mycotoxins in the samples, being present in 97%, 97%, and 90% of the samples, respectively. The geographical origin or the agricultural practice had no influence on the mycotoxin concentrations of the samples. The babyfoods included in the samples had significantly lower concentrations of mycotoxins than the other products with a mean total mycotoxin content of 47 microg/kg compared with 99 microg/kg for the other kinds of food. All the samples evoked toxicity in the in vitro test, but no correlation between cytotoxicity and the mycotoxin concentrations was observed.     

Characterization of polyesters prepared from three different phthalic acid isomers by CID-ESI-FT-ICR and PSD-MALDI-TOF mass spectrometry

Polyesters prepared from the same diol, 2-butyl-2-ethyl-1,3-propanediol, but different phthalic acid isomers, phthalic, isophthalic, and terephthalic acid, were characterized by collision-induced dissociation electrospray ionization Fourier transform ion cyclotron resonance (CID-ESI-FT-ICR) and postsource-decay matrix-assisted laser desorption/ionization time-of-flight (PSD-MALDI-TOF) mass spectrometry. Sodiated dihydroxyl-terminated polyester oligomers containing five repeating units at m/z 1634 were selected as precursor ions for dissociation studies. Two main mechanisms occurred in the fragmentation of all of the polyesters, since dissociation of the oligomers was initiated by hydrogen rearrangement or transesterification reactions. Polyesters prepared from different phthalic acid isomers could be distinguished by their fragmentation behavior. Polyester prepared from phthalic acid was easily identified by using both CID-ESI-FT-ICR and PSD-MALDI-TOF mass spectrometry. However, distinguishing between the polyesters prepared from isophthalic and terephthalic acid succeeded marginally only with CID-ESI-FT-ICR mass spectrometry. Molecular dynamics calculations were used to obtain an idea of the fragmentation behavior of the polyesters. The low-energy structures of the precursor ions were determined, and the coordination of the oxygen atoms of the polyester oligomers to the sodium cation was examined more closely. Both the experimental and the theoretical studies showed that the sodium ion affinity of polyester changed with the phthalic acid isomer.     

Visualization of a pharmaceutical unit operation: wet granulation

Recent developments in the field of process engineering and manufacturing sciences enable a new level of process understanding. However, extracting this understanding from increasing amounts of information is challenging. The aim of this study was to create a process vector from a model process describing all relevant information and, by that means, create a tool for combining and visualizing this information. Physical (impeller torque and temperature) and chemical (near-infrared spectroscopy) information from a small-scale high-shear granulation was used in the process vector. The vectors created were visualized by two different methods: principal component analysis (PCA) and the self-organizing map (SOM). None of the individual measurement techniques were able to describe the state of the process alone, although they provided important information about the process. By combining the data and visualizing it, an overview could be achieved. The SOM approach had two advantages over the PCA: it presented the results in terms of the original variables and enabled the analysis of nonlinear responses. However, both visualization methods could be used to describe the progress of the process and to increase the level of process understanding.     

Drought Stress Alters the Concentration of Wood Terpenoids in Scots Pine and Norway Spruce Seedlings

Drought is known to have an impact on the resistance of conifers to various pests, for example, by affecting resin flow in trees. Little is known, however, about the quantitative and qualitative changes in resin when trees are growing in low moisture conditions. We exposed Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst.) seedlings to medium and severe drought stress for two growing seasons and analyzed the monoterpenes and resin acids in the main stem wood after two years of treatment. In addition to secondary chemistry, we measured the level of nutrients in the needles and the growth response of seedlings. After the first year of treatment, drought stress did not affect the growth of seedlings, but in the second year, shoot growth was retarded, especially in Scots pine. In both conifer species, severe drought increased the concentrations of several individual monoterpenes and resin acids. Total monoterpenes and resin acids were 39 and 32% higher in severe drought-treated Scots pine seedlings than in the controls, and 35 and 45% higher in Norway spruce seedlings. In Scots pine needles, the concentrations of nitrogen and phosphorus increased, while magnesium and calcium decreased compared to controls. In Norway spruce needles, nutrient concentrations were not affected. The results suggest that drought stress substantially affects both the growth of conifers and the chemical quality of the wood. We discuss the potential trade-off in growth and defense of small conifer seedlings.     

Spatial distibution and temporal accumulation of polychlorinated dibenzo-p-dioxins,dibenzofurans, and biphenyls in the Gulf of Finland

Dated sediment cores and surface sediments were analyzed from the Gulf of Finland, a part of the Baltic Sea, to study the sources, levels, distribution, and total amounts of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and polychlorinated biphenyls (PCBs). The gulf was found to be severely polluted, with PCDD/F sum concentrations as high as 101000 ng/kg and 479 ng/kg WHO-TEQ in dry weight. The source of pollution was the former manufacturing and use of a chlorophenol based wood preservative along the Kymijoki River. It was estimated thatthe impacted sedimentary area stretched a distance of 75 km away out from the coast and that the PCDD/F sum load attributed to the wood preservative source was 1770 kg of PCDD/Fs or 12.4 (+/-2.8) kg WHO-TEQ. The surface sediments contained 24-66% of the maximum concentrations present in the 1960-1970s, showing that the river still acts as a significant PCDD/F source and may contribute to the high levels in fish. Moreover, the reduced PCDD/F and PCB concentrations were partly due to the dilution by increased dry matter deposition. PCBs were uniformly distributed over the gulf, and the PCB load in the polluted area was 2020 kg or 0.14 kg WHO-TEG.     

Synthesis of cobalt nanoparticles to enhance magnetic permeability of metal–polymer composites

Metallic cobalt nanoparticles were synthesized by hydrogen reduction method. Particles were coated in situ with carbon by adding ethene to reaction flow. Particles were characterized by transmission electron microscopy, energy dispersive X-ray emission, X-ray diffraction, X-ray fluorescence and BET method. The observed cobalt particle size distributions in different cobalt batches produced with unvarying reaction parameters was reproducible: The mean diameter of primary cobalt particle varied only 5% from the mean value of 76 nm in different batches. Increased carbon precursor concentration decreased mean diameter of cobalt particles to 17 nm. The produced nanoparticles were used as filler material in 0–3 type metal–polymer composites. Composite samples with varying filler loading were fabricated with mixing extrusion and injection moulding techniques. The magnetic properties of the fabricated composites were measured up to 1 GHz. In order to analyse the particle distribution in composite matrix and its effect on magnetic properties the microstructure was studied.     

Effect of viscosity ratio and processing conditions on the morphology of blends of liquid crystalline polymer and polypropylene

The effect of viscosity ratio and processing conditions on LCP/PP blend morphology was studied. The viscosity ratio (η_LCP/η_PP) was varied from 0.1 to 3.6 by using five different polypropylene grades as the matrix and two LCPs as the dispersed phase (20 wt %). The most spontaneous fiber formation was achieved when the viscosity ratio was between 0.5 and 1. In addition to shear forces, elongational forces are important in achieving a highly fibrillar structure and significant mechanical reinforcement. The lubricating effect induced by the low viscosity of LCP was most pronounced for the blends exhibiting a fibrillar morphology. The morphologies of blends produced by different mixing equipment differed only slightly. The greatest variation in the mixing efficiency was found for blends whose components had totally dissimilar melt viscosities. The slight differences in morphology due to melt blending in dissimilar equipment were decreased after injection molding, whereas the differences in morphology due to dissimilar viscosity ratios were still evident in the injection molded blends. Thus, the viscosity ratio at processing in the actual processing conditions is of great importance. © 1994 John Wiley & Sons, Inc.     

Two-phase flow in a full-scale loop seal facility

An experimental program has been carried out to study two-phase behaviour of a PWR cold leg loop seal during loss-of-coolant accidents. The experimental facility comprises a full-scale cold leg with a reactor coolant pump simulator. Three separate air/water test series were performed to determine the onset of slugging in the horizontal pipe, the residual water mass and the total two-phase pressure drop in the loop seal.The results of flow regime transition experiments have been compared with smaller-scale experiments and with theoretical predictions to evaluate scaling criteria. The strong hysteresis of transitions found between the stratified and slug flow regimes depends on the loop seal geometry and U-tube oscillations.