Enhanced radiative efficiency in GaN quantum dots grown by molecular beam epitaxy

Self-assembled GaN quantum dots (QDs), grown on AlN by molecular beam epitaxy, were investigated by time-resolved photoluminescence spectroscopy. We investigate the emission mechanism in GaN QDs by comparing the carrier recombination dynamics in single and multiple period QDs. At 100 K, the PL decay time in single period QD structures is considerably shorter than in stacked QDs. Compared to single period QDs, the room temperature PL efficiency is considerably enhanced in 20 period QDs due to the reduction in nonradiative recombination processes.     

Unified modeling technique for high-viscosity,melt-phase,condensation polymer reactors

Mathematical models for chemical reaction and mass transfer occurring in the manufacture of high-viscosity condensation polymers are considered. A preliminary study indicates that several diverse models can be represented using a single formula based upon an effectiveness factor. The effectiveness factor is shown to depend upon a ratio of time scales of mixing and reaction. The formula giving the effectiveness factor in terms of the time scales ratio is shown to depend upon mixing assumptions only. Starting with a mixing-cell model, a new modeling framework is developed and shown to include the previous models as special cases. The framework is free of inherent mixing assumptions and can be applied to a wide variety of situations once the mixing characteristics are specified. © 1993 John Wiley & Sons, Inc.     

A novel hybrid deep learning method with cuckoo search algorithm for classification of arrhythmia disease using ECG signals

Neural Computing and Applications - This work presents an efficient hybridized approach for the classification of electrocardiogram (ECG) samples into crucial arrhythmia classes to detect heartbeat...     

K–La–MgO as heterogeneous catalyst for synthesis of 3-(2-hydroxyethyl)-1,3-oxazolidin-2-one from diethanol amine and carbon dioxide

Cost-effective valorization of carbon dioxide into bulk and specialty chemicals using catalysis will be attractive in the foreseeable future. 1,3-Oxazolidin-2-one derivatives are one of the important classes of heterocyclic compounds which have wide applications in pharmaceutical industries due to their biological activities such as antibacterial, antimicrobial, antiseptic. Various synthetic routes are employed to prepare these compounds which include phosgenation, oxidative carbonylation, etc., which make use of polluting chemicals and homogeneous catalysts. The heterogeneous catalytic processes to synthesize these derivatives are quite limited. Thus, developing a green route which is environmental friendly is highly desirable. The current work deals with development of a heterogeneous reusable catalyst and its application to synthesize 1,3-oxazolidin-2-one derivatives using carbon dioxide as a C1 source. The fact that no use of promoter or organic co-catalyst is made in the current process makes the synthesis route more favorable. Pure La–MgO and K–La–MgO with different K loading (1, 3, 5, and 7 wt%) synthesized by combustion route were screened for carbonylation of diethanol amine. 5% K–La–MgO was found to be the best catalyst. The catalyst was well characterized in virgin form and after use by various analytical techniques like TEM, SEM, XRD, CO₂ and NH₃-TPD, BET surface area analysis. With 5% K–La/MgO, 72% conversion of diethanol amine was achieved with 100% selectivity of the desired product at optimum conditions, i.e., 150 °C, 5 wt% K–La/MgO catalyst loading of 0.02 g/cm³ and 2.0 MPa CO₂ pressure. Reaction mechanism was proposed and kinetic model developed. The apparent activation energy was calculated as 18.76 kcal/mol. The catalyst was robust and recyclable. The process is clean and green.     

Zodiac: A history-based interactive video authoring system

Easy-to-use audio/video authoring tools play a crucial role in moving multimedia software from research curiosity to mainstream applications. However, research in multimedia authoring systems has rarely been documented in the literature. This paper describes the design and implementation of an interactive video authoring system called Zodiac, which employs an innovative edit history abstraction to support several unique editing features not found in existing commercial and research video editing systems. Zodiac provides users a conceptually clean and semantically powerful branching history model of edit operations to organize the authoring process, and to navigate among versions of authored documents. In addition, by analyzing the edit history, Zodiac is able to reliably detect a composed video stream's shot and scene boundaries, which facilitates interactive video browsing. Zodiac also features a video object annotation capability that allows users to associate annotations to moving objects in a video sequence. The annotations themselves could be text, image, audio, or video. Zodiac is built on top of MMFS, a file system specifically designed for interactive multimedia development environments, and implements an internal buffer manager that supports transparent lossless compression/decompression. Shot/scene detection, video object annotation, and buffer management all exploit the edit history information for performance optimization.     

Effect of gamma irradiation on structural,morphological and optical properties of thermal spray pyrolysis deposited CuO thin film

This study reports the influences of gamma irradiation (GI) in the range of 20–100 kGy on CuO thin films via thermal spray pyrolysis technique on the glass substrates. The results demonstrate significant influences of GI on the crystallographic, microstructural and optical characteristics of CuO thin films. The obtained XRD results showed that the crystallinity of the films deteriorates by gradually decreasing crystallite size (from 59.13 to 46 nm) as applied gamma doses increases. However, the basic monoclinic crystal structure remains same. The dislocation density and lattice strain increased with the rise of GI absorbed dose due to the creation of defects. The values of number of crystallites per unit surface area increased as dose increased indicating the abundance of crystallization of nano CuO thin films. A UV–Vis–NIR spectrophotometer was utilized to determine the optical properties and obtained results indicated that the optical energy band gap (OBG) energies reduced from 2.00 to 1.72 eV as the doses increased from 0 to 100 kGy. No distinctions of the monoclinic phase of virgin CuO thin film have been perceived under applied absorbed doses, notwithstanding the slight deterioration of the crystallinity and narrowing the OBG.     

A simple and efficient sun tracking mechanism using programmable logic controller

To increase the unit area illumination of solar ray on PV panel, it is required to track the sun throughout the day. So to reach the goal various type of sun tracking mechanism is already developed but in this paper we designed two different types of sun tracking mechanism: single axis and dual axis tracking using programmable logic controller (PLC) as it has numbers of unique advantages like??it is faster, reliable, requires less maintenance and reprogrammable. A comparative study between those two systems is also presented in this paper. The whole system has been designed and tested using GE, FANUC PLC.     

Influence of Al doping in LaCoO3 on structural,electrical and magnetic properties

We report investigations on polycrystalline LaCo_1?x Al _x O₃ (x = 0–0.9) bulk samples. The solid state synthesized samples showed a coexistence of rhombohedral and monoclinic phases in the intermediate concentrations (0.2 ≤ x ≤ 0.5) and pure rhombohedral phase otherwise. The observed effect of Al doping on dc transport has been analysed on the basis of small polaron hopping mechanism. The magnetisation results presented give evidence of weak ferromagnetism and anomalous temperature dependence of coercivity which we associate to the canting of the localised high-spin Co(III) and anti-symmetric exchange interactions at low temperatures.     

Novel organic–inorganic composite material as a cation exchanger from a triterpenoidal system of dammar gum: synthesis,characterization and application

A pioneer study has been conducted to synthesize novel hydrogel starting from a non-cellulosic raw material, gum dammar-a triterpenoidal system, and then converting this hydrogel into an organic–inorganic composite zirconium-based ion exchanger. Gum dammar was cross-linked with polyacrylamide zirconium (IV) iodo-oxalate [Gd-cl-poly(AAm)-Zr (IV) iodo-oxalate] by incorporating inorganic precipitates into the polymeric mixture. The polymeric mixture was synthesized using gum dammar (Gd), acrylamide (AAm), N, N′-methylene-bis-acrylamide (MBA) and potassium persulphate (KPS). The reaction conditions for synthesis of hydrogel and ion exchanger such as time (120 min), temperature (70 °C), solvent (4 mL), concentration of monomer (12.97 × 10^?3 mol/L), initiator (1.48 × 10^?4 mol/L), cross-linker (4.22 × 10^?4 mol/L) and ratio of zirconium oxychloride (0.1 M), potassium iodate (0.1 M) and oxalic acid (0.1 M) in ratio 2:3:2 were optimized to obtain maximum ion exchange capacity (2.02 meq/g). The morphology and structure of hydrogel and ion exchanger were studied using FTIR, SEM, XRD and TGA/DTA/DTG. The SEM study was followed by energy dispersive spectroscopy for elemental analysis. The ion exchanger was quite stable in various acids and bases at low concentration but it completely dissolved in acids and bases at high concentrations. Distribution studies showed that the synthesized ion exchanger had high selectivity for Pb²⁺ ions. Thus, the polymeric-inorganic hybrid material showed integration of both inorganic and organic characteristics within the composite material.     

Making Nonwoven Fibrous Poly(ε‐caprolactone) Constructs for Antimicrobial and Tissue Engineering Applications by Pressurized Melt Gyration

A pressurized melt gyration process has been used for the first time to generate poly(ε‐caprolactone) (PCL) fibers. Gyration speed, working pressure, and melt temperature are varied and these parameters influence the fiber diameter and the temperature enabled changing the surface morphology of the fibers. Two types of nonwoven PCL fiber constructs are prepared. First, Ag‐doped PCL is studied for antibacterial activity using Gram‐negative Escherichia coli and Pseudomonas aeruginosa microorganisms. The melt temperature used to make these constructs significantly influences antibacterial activity. Neat PCL nonwoven scaffolds are also prepared and their potential for application in muscular tissue engineering is studied with myoblast cells. Results show significant cell attachment, growth, and proliferation of cells on the scaffolds.