Digital Connectivity and Extended Well-Composed Sets for Gray Images

In this paper, we propose a new definition of digital connectivity for gray images on a 2D space for arbitrary grid systems. We extend a digital version of the Jordan curve theorem and its converse proved earlier by Rosenfeld for the rectangular grid system. We also extend in two directions the concept of well-composed sets introduced by Lateckiet al.(1995,Comput. Vision Image Understanding61,70–83). First, we extend the definition of well-composed sets from the quadratic grid system to an arbitrary grid system. Then, by using the concept of parameter-dependent connected components introduced by us in a previous work, we allow the pixels in a connected component of a well-composed set to have different gray values so that the connectivity of connected components accommodates a wider meaning.     

An algebraic method for processing colored images

An 8-valued commutative ring is developed to process colored images. Algebraic operators are defined to perform a number of operations such as the extraction of the primary colors and contours of different colors.     

Acoustic study of nano-crystal embedded PbO-P2O5 glass

Nano-crystal embedded PbO-P₂O₅ glass has been prepared and characterized by XRD and TEM measurements. The ultrasonic velocity and attenuation measured within the temperature range 80–300 K show significant structure and interesting feature with the presence of nano-crystalline region. The glass samples were prepared by melt-quench method and nano-crystals of different sizes were produced by heat treatment of the glasses for different durations of heating. All the processes were carried out at or above glass transition temperature. A theoretical model that takes account of the effects of thermally activated relaxation, anharmonicity as well as microscopic elastic inhomogeneities arising out of fluctuations has been successfully applied to interpret the variation of ultrasonic velocity and attenuation data. An interesting outcome of this application has been to propose a method for the determination of the size of nano-crystals from the ultrasonic attenuation data.     

Studies on jute–asphalt composites

The tensile properties of jute make it a suitable raw material for asphalt overlay (A/O) fabric. In this study, the thermal stability of jute under conditions of asphalt overlaying process was investigated and the compatibility of jute with asphalt was assessed through experimentation on jute–asphalt composites under mechanical and hygral loads. Fourier transform infra red (FTIR) spectroscopic study revealed probable chemical bonding between jute and asphalt. The test for ascertaining the capability of asphalt encasement for protecting jute against biodegradation under enzymatic attack was found positive. A 6‐month hygral treatment, of the jute–asphalt composite, showed significant increase in modulus of the material. The results indicate that although the strength of jute deteriorates by about 10% under asphalt overlaying condition, the overall tensile behavior of jute fabric–asphalt composite material is considerably superior to that of the pure jute fabric, even under biological and extended hygral loading conditions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Microstructure and Properties of Spark Plasma-Sintered ZrO2–ZrB2 Nanoceramic Composites

In a recent work, ¹ we have reported the optimization of the spark plasma sintering (SPS) parameters to obtain dense nanostructured 3Y-TZP ceramics. Following this, the present work attempts to answer some specific issues: (a) whether ZrO₂-based composites with ZrB₂ reinforcements can be densified under the optimal SPS conditions for TZP matrix densification (b) whether improved hardness can be obtained in the composites, when 30 vol% ZrB₂ is incorporated and (c) whether the toughness can be tailored by varying the ZrO₂–matrix stabilization as well as retaining finer ZrO₂ grains. In the present contribution, the SPS experiments are carried out at 1200°C for 5 min under vacuum at a heating rate of 600 K/min. The SPS processing route enables retaining of the finer t -ZrO₂ grains (100–300 nm) and the ZrO₂–ZrB₂ composite developed exhibits optimum hardness up to 14 GPa. Careful analysis of the indentation data provides a range of toughness values in the composites (up to 11 MPa·m^1/2), based on Y₂O₃ stabilization in the ZrO₂ matrix. The influence of varying yttria content, t -ZrO₂ transformability, and microstructure on the properties obtained is discussed. In addition to active contribution from the transformation-toughening mechanism, crack deflection by hard second phase brings about appreciable increment in the toughness of the nanocomposites.     

Experimental design in soap manufacturing for optimization of fuzzified process capability index

In manufacturing industries, the quality of a product depends on the combined effect of multiple input variables working singly or together and therefore attention has been given on process capability indices to shift from single to multivariate domain. In case of multivariable domain the capability to incorporate uncertainties at the time of decision making becomes necessary. Fuzzy system is introduced to take care of this requirement. In this article the process parameters of soap manufacturing industries have been analyzed. The process capability is determined using Fuzzy Inference System rule editor based on a set of justified if then statements as applicable for the process. The data has been collected in linguistic form to derive its process capability, using a set of justified rules and the effect of each factor has been determined using Design of Experiments (DoE) and analysis of variance technique (ANOVA) for improving the soap quality from perspective of its softness. This article ventures to propose a new methodology by integrating Fuzzy with DoE providing better result followed by DoE and Fuzzy Inference system in isolation.     

Small amphiphilic organics, coordination extended solids, and constant curvature structures

In this Account, we explore the role constant curvature structures play in amphiphilic small molecule crystals and extended coordination solids. A constant curvature structure is one in which there is a surface or interface that has the same curvature throughout its surface. Simple examples of such structures contain spheres (micelles), columns, or layers. Yet another family are cubic as is found in the gyroid topology. For amphiphilic systems, there are two domains, one generally hydrophobic and the other hydrophilic. We find that the interfaces between these two domains in small molecule structures resemble those in larger scale systems and adopt topologies related to constant curvature structures. The hydrophobic-to-total volume ratio, a molecular parameter, can be used to predict which type of constant curvature structure is adopted. In the case of three coordinate extended solids, constant curvature plays a role both in the extended net topology and in the hydrophobic-to-hydrophilic interface.     

Natural rubber–ethylene‐propylene‐diene rubber covulcanization: Effect of reinforcing fillers

Filled covulcanizates of elastomer blend comprising natural rubber (NR) and ethylene‐propylene‐diene rubber (EPDM) of commercial importance were successfully prepared by using a multifunctional rubber additive; namely, bis(diisopropyl)thiophosphoryl disulfide (DIPDIS). A Two‐stage vulcanization technique further improved the physicochemical properties of the blend vulcanizates by restricting, through the formation of polar rubber bound intermediates, the migration of curative and filler from lower to highly unsaturated rubber. Scanning electron microscopy studies indicate homogeneity and coherency in the morphology of the two‐stage vulcanizates. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1001–1010, 2002; DOI 10.1002/app.10361