Time-domain measurements with the Hewlett-Packard network analyzerHP 8510 using the matrix pencil method

The generalized pencil of function (GPOF) method, also known as the matrix pencil method, is used to improve the resolution of HP 8510B network analyzer data in the time domain. This method provides for much higher resolution than the Fourier techniques. A comparison of the two methods is given for the example of the Beatty standard. The examples show that a parametric technique such as the GPOF can provide accurate and reliable results with a high degree of resolution even when the fast Fourier transform (FFT)-based technique fails     

Fractal and topological characterization of branching patterns on the fracture surface of cross-linked dimethacrylate resins

The branching patterns formed as a result of crack growth in dimethacrylate resins below their glass transition temperatures looked similar to fractal trees. The skeletons of the patterns were analysed numerically for their topological and geometrical properties. The number of branches, N _i , mean branch lengths, N _i , and branch angles of a particular order, defined according to the Strahler and inverted Weibel schemes, followed exponential scaling behaviour: N _i (R _b )^–i and L _i (R _l ) ⁱ . Using the relationship for the fractal dimension D=In R _B /In R _L , a value of D=1.4 was obtained for the fracture pattern. Fractal behaviour was also examined by the box-counting method which indicated a power-law dependence of the mass on the box size with fractal dimension exponent D=1.4 in the case of the fracture pattern. However, the mass-shell method for both the fracture pattern and the fractal trees gave an exponential increase of mass with distance from the origin, rather than the power-law behaviour expected for fractals. This was attributed to the fact that branches of different sizes were distributed in restricted regions of space closer to the periphery, rather than uniformly over the whole pattern.     

A new electronically controlled floating/grounded meminductor emulator based on single MO-VDTA

Analog Integrated Circuits and Signal Processing - This paper proposes a circuit configuration to emulate the behaviour of a floating/grounded incremental/decremental flux-controlled meminductor,...     

The handwriting problem [man-machine motion analogy in robotics]

Two approaches are proposed to model and control a human-like motion of robot arms. The first, which is based on the concept of distributed positioning (DP), is suggested as a good model of arm motion in the phase where fatigue does not appear. The prescribed motion of the end-effector is distributed to a redundant number of arm joints in accordance to their acceleration capabilities. For the phase where fatigue appears, the concept of virtual fatigue is proposed. This artificial variable, which is based on robot dynamics, emulates the progress of biological fatigue. The human handwriting task is chosen for the simulation. The DP concept is tested first by modeling nonfatigued motion. The justification of the usual inclination of letters is presented, and the relation between the inclination, legibility, and a secondary objective (finger involvement, energy consumption, motor thermal load) is discussed. It is found that, for some prescribed level of legibility, the individual optima of all the secondary cost functions are quite near to each other. Writing in the presence of fatigue is also analyzed, applying the method of the so-called "virtual fatigue".     

Cotton Yarn Sizing by Acrylamide Grafted Starch Copolymer

Synthesis and characterization of copolymer obtained by grafting acrylamide onto hydrolyzed potato starch and its application in cotton yarn sizing were presented in this work. Some process parameters of starch hydrolysis and grafting, like as hydrolysis yield, grafting yield, grafting percentage, graft efficiency, and monomer to polymer conversion were determinated. Molar mass values of hydrolyzed starch and copolymer samples are located in a narrow range of 1 × 10⁵ to 1 × 10⁷ and 1 × 10² to 1 × 10⁴. Grafted hydrolyzed starch, as a sizing agent, gives better results than nongrafted, particularly in terms of sizing uniformity, yarn mechanical parameters, and easier removal in subsequent desizing process.     

Changes of hydrogen peroxide and radical-scavenging activity of raspberry during osmotic, convective, and freeze-drying

This study was conducted to investigate the influence of different drying treatments on antioxidant (AO) activity and phenolic content of raspberry (Rubus idaeus), cultivar Willamette. Whole raspberry fruits were dried convectively (air-drying), osmotically, and freeze-dried. Acetone-water extracts of fresh and dried raspberries were assessed for total phenolic content by standard Folin-Ciocalteau method. Two AO assays were applied, a recently developed direct current (DC) polarographic assay based on decrease of anodic oxidation current of hydrogen peroxide and widely used radical scavenge against the 1,1-diphenyl-2-picrylhydrazyl (DPPH). Strong correlation has been obtained between both AO assays and total phenolic content. In addition, some individual phenolic compounds present in raspberry have been assessed using DPPH and DC polarographic assay. Comparison and evaluation of drying methods has been based on preservation of AO activity and total phenolic content. Obtained results confirmed superiority of freeze-drying; convective drying caused slight changes while osmotic dehydration showed a significant decrease of phenolic compounds and AO activity.     

Outage performance of dual‐hop relaying systems over extended generalized‐K fading channels

The outage performance of the amplify‐and‐forward relaying strategies over mutually uncorrelated extended generalized‐K fading channels is addressed in this paper. The attention is dedicated to the analyses of the noise‐limited and also interference‐limited environment. The new analytical expression for outage probability of observed relaying system in the presence of thermal noise is derived using the method for approximating equivalent signal‐to‐noise ratio. In addition, the outage performance is studied for the dual‐hop system when only the single dominant co‐channel interference is inherent at the relay and destination node. The correctness of the proposed mathematical derivations is verified by simulations. Copyright © 2014 John Wiley & Sons, Ltd.     

An initial study on feasible treatment of Serbian lignite through utilization of low-rank coal upgrading technologies

Despite benefiting from vast fuel reserves, combustion of low-rank coals is commonly characterized by low thermal efficiency and high pollutant emissions, partly due to high moisture content of the coals in question. Thus, removal of moisture from low-rank coals is deemed an important quality upgrading method. The paper provides an overview of the current status of low-rank coal upgrading technologies, particularly with respect to utilization of drying and dewatering procedures. In order to examine the influence of relevant parameters on the moisture removal process, a model of convective coal drying in a packed, as well as in a fluid bed combustion arrangement, is developed and presented. Product-specific data (intraparticle mass transfer, gas–solid moisture equilibrium) related to the coal variety addressed herein (lignite) are obtained through preliminary investigations. Effective thermal conductivity of the packed bed as defined by Zehner/Bauer/Schlünder is used to define heat transfer mechanisms occurring in the packed bed. Similar two-phase fluidization model has been validated for different types of biomaterials.     

Numerical modelling of the NGI-DSS test and cyclic threshold shear strain for degradation in sand

Ability of laboratory determination of a sand behaviour in static and dynamic loading conditions are influenced by (among other things): sample preparation, number of tests, size of strains, speed of loading and averaging of the errors during examination. Dynamic load per se causes accumulation of the pore water pressure and the phenomenon of stiffening-threshold-degradation which makes the understanding of the sand behaviour more difficult. The complex behaviour of granular material, i.e. sand, is caused by chemical and physical properties of individual particles and their mutual interaction. Obviously, these interrelationships could not be analysed on the basis of laboratory testing. One way to analyse it is numerically, with algorithm that takes into consideration the characteristics of individual particles as well as their interaction in the sand matrix. Discrete element method (DEM) is a numerical method which takes into consideration the discrete nature of sand and shape of particles and is used as an elementary research tool for sand behaviour. Program package PFC3D is based on DEM and allows the modelling of the laboratory equipment, materials and calibration of its micro-characteristics, based on experimental results. The research of cyclic threshold shear strain for degradation in sand includes observation and visualization of the sample preparation (creation of the material skeleton), pouring of the material (transition from liquid to meta-stable state), influence of the particle shape (interlocking, arching), consolidation (deformation of the skeleton) and development and braking of force chains through the sample. This paper explores the suitability of the selected numerical method for modelling of NGI-DSS device, calibration of the tested granular material (Nevada sand) and preparation of the sample for testing and presentation of the stiffening-threshold-degradation phenomenon.