Novel superabsorbent materials from bacterial cellulose

A novel process for the production of superabsorbent materials (hydrogels) from bacterial cellulose (BC) was developed. Prior to crosslinking with a water‐soluble polyethylene glycol diacrylate (PEGDA), BC was first carboxymethylated and functionalized with glycidyl methacrylate. The degree of crosslinking influenced the swelling properties of the hydrogels. The use of greater amounts of PEGDA enhanced the formation of a thicker macromolecular network containing fewer capillary spaces in the crosslinked gel. The maximum water retention value of the hydrogels containing 2.5–3.5 mmol of carboxyl groups per gram of gel reached 125 g g^?1 in distilled water, and 29 g g^?1 in saline (0.9% NaCl solution). The highly porous hydrogel architecture with a pore size of 350–600 µm created a high specific surface area. This enables rapid mass penetration in superabsorbent applications. The superabsorbent hydrogels reached 80% of their maximum water absorption capacity in 30 min. © 2018 Society of Chemical Industry     

Incorporation of nonionic emulsifiers inside styrene–methacrylic acid copolymer particles during emulsion copolymerization

Emulsion copolymerizations of styrene and methacrylic acid with polyoxyethylene nonylphenyl ether nonionic emulsifiers having various hydrophilic–lipophilic balance (HLB) values (13.7, Emulgen 911; 15.5, Emulgen 920; 17.2, Emulgen 931) were performed. The incorporation behavior of the nonionic emulsifiers, comprising polydisperse poly(ethylene oxide) (PEO) chain lengths, inside the particles was investigated. At the completion of the polymerization, the incorporated percentage of the lowest HLB emulsifier was 61%, much higher than that of the highest HLB one (10%). In both polymerizations, the amounts of the incorporated emulsifiers increased with conversion, and shorter PEO chain (i.e., lower molecular weight) components were predominantly incorporated over longer PEO chain components.     

Poly(divinylbenzene) Microencapsulated Octadecane for Use as a Heat Storage Material: Influences of Microcapsule Size and Monomer/Octadecane Ratio

Poly(divinylbenzene) (PDVB) microencapsulated octadecane (OD) (PDVB/OD) used as heat storage material were prepared by suspension polymerization at 70°C using benzoyl peroxide and polyvinyl alcohol as initiator and stabilizer, respectively. The influence of microcapsule size and divinylbenzene (DVB)/OD weight ratio on the microcapsule shape and thermal properties of encapsulated OD were considered. Thermal properties and thermal stability of PDVB/OD microcapsules were determined using differential scanning calorimeter (DSC) and thermogravimetric analyzer. The optical micrographs and scanning electron micrographs showed that the microcapsules have spherical shape only in the case of 50/50 (%w/w) of DVB/OD whereas they were nonspherical with the decreasing of DVB content. However, the core materials were still well encapsulated even increasing the OD content to 70%wt. From DSC analysis, in all cases, the melting temperature of encapsulated OD (28°C) was almost the same as that of bulk OD (30°C), yet it was quite different in the case of crystallization temperature (≤ 19°C and 25°C for encapsulated and bulk OD, respectively). The latent heats of melting and crystallization of encapsulated OD, in all conditions, were reduced from those of bulk OD (242 and 247 J/g, respectively).     

High performance biocompatible cellulose‐based microcapsules encapsulating gallic acid prepared by inverse microsuspension polymerization

In this study, the preparation of biocompatible cellulose‐based microcapsules encapsulating gallic acid (GA), an important antioxidant of Bambara groundnut extracts, by water‐in‐oil inverse microsuspension polymerization was studied. GA and carboxymethyl cellulose (CMC) were selected as core and shell materials, respectively. For high encapsulation efficiency, CMC was firstly modified (modified‐CMC (m‐CMC)) with 3‐(trimethoxysilyl)propyl methacrylate (MPS) as a silane coupling agent. It was subsequently polymerized with methacrylic acid (MAA) monomer through a radical route, forming a PMAA grafted m‐CMC (m‐CMC‐g‐PMAA) biocompatible polymer shell. Using CMC:MPS in a ratio of 75:25 (w/w %), highly water‐soluble m‐CMC containing a C=C bond for further radical polymerization was obtained. After inverse microsuspension polymerization at various ratios of m‐CMC:MAA, highly stable spherical m‐CMC‐g‐PMAA microcapsules encapsulating GA were formed in all ratios. It was observed that the encapsulation efficiency increased with increase in MAA content. m‐CMC:MAA in a ratio of 33:67 (w/w%) presented the highest encapsulation efficiency which may due to the increase of hydrophilicity of the aqueous phase. It also presented rapid release and non‐cytotoxic characteristics, suited for use in cosmetic products. © 2018 Society of Chemical Industry     

Innovative and high performance synthesis of microcapsules containing methyl anthranilate by microsuspension iodine transfer polymerization

In this research, preparations of polymer microcapsule encapsulated methyl anthranilate (MA) as an essential oil model by both microsuspension conventional radical polymerization (ms CRP) and microsuspension iodine transfer polymerization (ms ITP) using methyl methacrylate (MMA) and ethylene glycol dimethacrylate (EGDMA) copolymer as the polymer shell were studied. In the case of ms CRP, a large amount of free polymer particles nucleated in aqueous medium were obtained. Using ms ITP, the free polymer particle formation was significantly depressed. Iodoform (CHI₃) as a chain transfer agent with 0.8 wt% relative to the monomer, such a phenomenon was not observed. Various emulsifiers (oleic acid, Span 80 and PEG 30 dipolyhydroxystearate (DPHS)) with low hydrophile–lipophile balance value were used to retain MA in the monomer droplets or polymerizing particles. DPHS is the most effective emulsifier to retain MA in microcapsules giving 58% encapsulation at 20 wt% of DPHS relative to MA. In addition, from the controlled release study, only 55 wt% of the encapsulated MA was released by 90 days. Polymer microcapsule encapsulated MA using an MMA‐EGDMA copolymer shell with a high percentage of encapsulation and without free polymer particles was successfully prepared for the first time. Based on slow release of the encapsulated MA, the prepared microcapsules could be used in various applications. © 2017 Society of Chemical Industry     

Influence of Poly(L-lactic acid) Molecular Weight on the Encapsulation Efficiency of Urea in Microcapsule Using a Simple Solvent Evaporation Technique

Poly(L-lactic acid) microencapsulated urea was prepared in water-in-oil-in-water (W₁/O/W₂) system by the solvent evaporation technique. The influence of poly(L-lactic acid) molecular weight on the percent loading, encapsulation efficiency, and the microcapsule morphology was studied using poly(L-lactic acid) having different number average molecular weights (M_n). Using the higher M_n, the smoother shell with complete encapsulation microcapsules was formed. Moreover, the percent loading and encapsulation efficiency of urea also increased with the poly(L-lactic acid) molecular weight. At 80,000 g/mol of poly(L-lactic acid), the obtained microcapsule gave the highest both percent loading (32%) and encapsulation efficiency (56%). The urea control release study of the prepared microcapsules was implemented by in vitro testing. The encapsulated urea was gradually released from the microcapsules, approximately 53, 29, and 22% of poly(L-lactic acid) at 3,000, 30,000, and 80,000 g/mol, respectively, for a month. These results presented the possibility of the prepared poly(L-lactic acid) microcapsules-encapsulated urea for urea control release that could be utilized in agricultural applications.     

Advances in carcinogenic metal toxicity and potential molecular markers

Metal compounds such as arsenic, cadmium, chromium, cobalt, lead, mercury, and nickel are classified as carcinogens affecting human health through occupational and environmental exposure. However, the underlying mechanisms involved in tumor formation are not well clarified. Interference of metal homeostasis may result in oxidative stress which represents an imbalance between production of free radicals and the system's ability to readily detoxify reactive intermediates. This event consequently causes DNA damage, lipid peroxidation, protein modification, and possibly symptomatic effects for various diseases including cancer. This review discusses predominant modes of action and numerous molecular markers. Attention is paid to metal-induced generation of free radicals, the phenomenon of oxidative stress, damage to DNA, lipid, and proteins, responsive signal transduction pathways with major roles in cell growth and development, and roles of antioxidant enzymatic and DNA repair systems. Interaction of non-enzymatic antioxidants (carotenoids, flavonoids, glutathione, selenium, vitamin C, vitamin E, and others) with cellular oxidative stress markers (catalase, glutathione peroxidase, and superoxide dismutase) as well as certain regulatory factors, including AP-1, NF-κB, Ref-1, and p53 is also reviewed. Dysregulation of protective pathways, including cellular antioxidant network against free radicals as well as DNA repair deficiency is related to oncogenic stimulation. These observations provide evidence that emerging oxidative stress-responsive regulatory factors and DNA repair proteins are putative predictive factors for tumor initiation and progression.     

Secondary particle formation in suspension polymerization using a particulate surfactant

ABSTRACT

Suspension polymerization is widely used for the preparation of microsphere and microcapsules for many applications. However, the formation of secondary particle byproducts decreases drastically the obtained microsphere yield and microcapsule shell strength. It is surprisingly finding that the secondary particles were not observed in the preparation of polymethyl methacrylate particles by suspension polymerization using particulate surfactant called Pickering emulsion. Therefore, in this work, the mechanism of secondary particle formation during suspension polymerization was investigated using various surfactants (zinc oxide, titanium dioxide, and silica nanoparticles compared to polyvinyl alcohol) and monomers (styrene, methyl methacrylate, and methyl acrylate) with different water solubilities. Results showed that submicrometer-sized secondary particles were still formed by homogeneous nucleation mainly due to radical exit from the monomer droplets. However, the formed secondary particles were unstable and then adsorbed on the main microsphere surface. The number of secondary particles increased when monomers with higher water solubility were used.