The performance of cache-based error recovery in multiprocessors

Several variations of cache-based checkpointing for rollback error recovery from transient errors in shared-memory multiprocessors have been recently developed. By modifying the cache replacement policy, these techniques use the inherent redundancy in the memory hierarchy to periodically checkpoint the computation state. Three schemes, different in the manner in which they avoid rollback propagation, are evaluated in this paper. By simulation with address traces from parallel applications running on an Encore Multimax shared-memory multiprocessor, we evaluate the performance effect of integrating the recovery schemes in the cache coherence protocol. Our results indicate that the cache-based schemes can provide checkpointing capability with low performance overhead, but with uncontrollable high variability in the checkpoint interval     

Capture of Airborne Particulate Using Surface Applied Emulsions: Potential for Postdetonation Dirty Bomb Cleanup

Recent research has proposed the use of asphalt and tall-oil-pitch emulsions for stabilizing radioactive contamination deposited on surfaces in urban areas. The objective of this project was to investigate whether surface applied emulsions could capture airborne radioactive particulate. Laboratory experiments included wind-blown particulate capture studies using an acrylic column and particulate retainment experiments using a wind box capable of producing wind speeds of 96?km/h. A probe methodology was developed to relate particulate retainment to a tack force on the emulsion surface. Experiments were also performed to determine the potential for such emulsions to absorb particulate matter into their emulsion matrix. Tall-oil-pitch emulsions outperformed asphalt emulsions in terms of particulate retention, tack force, and the ability to absorb magnesium silicate. Both tall-oil-pitch and asphalt emulsions were capable of extracting 22–24?g?m?2 of powder from particulate-laden airflow. Tall-oil-pitch emulsions were capable of retaining as much as 5–10% of magnesium silicate powder applied (i.e., retainment densities of 10–20?g?m?2) even after seven?days of curing and after applying 96.5?km/h (60?mph) wind. Tall-oil-pitch emulsions were able to absorb surface-applied magnesium silicate (approximately 0.1–0.2?g of magnesium silicate per 1.0?g of emulsion within three?days) into their emulsion matrix, preventing the magnesium silicate from being exposed to the external environment. Initial results with these five different emulsion formulations suggested particulate capture was feasible. Future emulsion formulations (i.e., longer curing times with greater acid concentrations) should be tested to optimize this postdetonation response strategy.     

Restrictions on the use of short-term action nifedipine in the United States. A review of facts

We have treated 50 patients with stage III, VI malignant tumors confirmed by pathology. The patients were divided into two groups. One group was treated by combination of chemotherapy and traditional Chinese medicine (treatment group); the other only by chemotherapy (control group). The effect of cancer treatment was evaluated according to the criteria of WHO. The results showed that the effective rate was 80% in treatment group and 52% in control group. The pain relieving rate was 68% in treatment group and 40% in control group (P < 0.01). This fact demonstrates that the application of traditional Chinese medicine can invigorate blood circulation, eliminate blood stasis, soften hardness and dissolve the mass, nourish blood and increase vigor. This kind of application can not only enhance the effect of cancer treatment but also increase the cancer pain relieving rate.     

阿维斯塔波莱瑞特厂炉卷轧机新技术

阿维斯塔波莱瑞特厂正在进行一个现代化改造项目，以提高炉卷轧机的生产能力，达到年产100万吨。但是，由于在阿维斯塔波莱瑞特厂炉卷轧机上的现有技术已达到极限，只有通过对轧机及自动化系统进行现代化的改造才有可能提高和增强轧机的利用率和易维护性。     

Development and characterization of magnetorheological polymer gels

Magnetorheological materials have been used in many applications in recent years. To develop new materials, polyurethane and silicone polymer gels were investigated. Rheology is qualitatively controlled for each system by controlling the concentration of reactants and diluents. The resulting polymers have solid, gel, or liquid states, depending on the crosslinking and dilution. The gels were characterized through kinetic analysis. Differential scanning calorimetry (DSC) was used with analysis methods to find the kinetic properties for diluted and undiluted polyurethane systems. Heat of reaction, order of reaction, preexponential constant, and activation energy were obtained from the experimental DSC data. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2733–2742, 2002     

FOCUS-type fuel assembly for PWRs

In recent years the development efforts for Siemens PWR fuel assemblies were mainly concentrated on reducing the fuel cycle costs and increasing the operational reliability of the fuel assemblies.The first objective was aimed at increasing the average discharge burnup to > 50 MWd/kgU and increasing the critical heat flux. The high envisaged burnup required to develop a corrosion resistant cladding tube outside the Zry-4 range. The decision was made to use a Duplex cladding tube consisting of a corrosion optimized outer layer on a Zry-4 base material. A ZrSnFeCr alloy with reduced tin content was chosen for the outer layer. The critical heat flux could be increased by introducing mixing vanes on the spacer grids within the active length.To reach the second objective, reliable avoidance of spacer grid damage during core loading and unloading and reduction of fuel rod defects by debris fretting, the spacer grid corners were improved and a debris separation grid was developed.These design improvements were introduced into the new FOCUS-type fuel assembly. The name FOCUS stands for “Fuel assembly with Optimized Cladding and Upgraded Structure”.     

Design for concurrent error detection and testability instorage/logic arrays

Storage/Logic Arrays (SLA's) represent a structured logic array approach to the design of VLSI sequential logic. Design for concurrent error detection and testability is complicated in these arrays by the presence of embedded memory elements and multiple levels of logic. A means of designing SLA's for ease of testability and concurrent error detection (CED) is provided in this paper. Test sets for static and dynamic CMOS circuits are described. Fault and error coverage is presented and performance and area costs are analyzed for example circuits. In addition, a means of implementing dynamic CMOS SLA's is presented and shown superior to previous NMOS, static CMOS, and dynamic CMOS approaches based upon power consumption and simplicity of design     

Process-based cost modeling of photonics manufacture: the cost competitiveness of monolithic integration of a 1550-nm DFB laser and an electroabsorptive modulator on an InP platform

The monolithic integration of components holds promise to increase network functionality and reduce packaging expense. Integration also drives down yield due to manufacturing complexity and the compounding of failures across devices. Consensus is lacking on the economically preferred extent of integration. Previous studies on the cost feasibility of integration have used high-level estimation methods. This study instead focuses on accurate-to-industry detail, basing a process-based cost model of device manufacture on data collected from 20 firms across the optoelectronics supply chain. The model presented allows for the definition of process organization, including testing, as well as processing conditions, operational characteristics, and level of automation at each step. This study focuses on the cost implications of integration of a 1550-nm DFB laser with an electroabsorptive modulator on an InP platform. Results show the monolithically integrated design to be more cost competitive over discrete component options regardless of production scale. Dominant cost drivers are packaging, testing, and assembly. Leveraging the technical detail underlying model projections, component alignment, bonding, and metal-organic chemical vapor deposition (MOCVD) are identified as processes where technical improvements are most critical to lowering costs. Such results should encourage exploration of the cost advantages of further integration and focus cost-driven technology development.