Synthesis and thermomechanical characterization of polyurethane elastomers extended with α,ω‐alkane diols

A series of polyurethane (PU) elastomers was prepared by the reaction of poly(?‐caprolactone) and 4,4′‐diphenylmethane diisocyanate, which was extended with a series of chain extenders (CEs) having 2–10 methylene units in their structure. The completion of the reaction was confirmed by Fourier transform infrared spectroscopy. The chemical structures of the synthesized PU samples were characterized with Fourier transform infrared, ¹H‐NMR, and ¹³C‐NMR spectroscopy, and the thermal properties were determined by thermogravimetric analysis, DSC, and dynamic mechanical thermal analysis techniques. The mechanical properties were also studied and are discussed. The thermogravimetric analysis and DSC analysis showed that CE length had a considerable effect on the thermal properties of the prepared samples. The dynamic mechanical thermal analysis and damping peaks were also affected by the number of methylene units in the CE length. The elastomer extended with 1,2‐ethane diol exhibited optimum thermal properties, whereas the elastomer based on 1,10‐decane diol displayed the worst thermal properties. Tensile strength and elongation at break decreased with increasing CE length, whereas hardness showed the opposite trend. The glass‐transition temperature moved toward lower temperatures with increasing CE length. The decrease in the glass‐transition temperature and tensile properties were interpreted in terms of decreasing hard segments and increasing chain flexibility. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Properties of Co-doped N-type FeSi2 processed by mechanical alloying

Iron-silicide was produced with a mechanical alloying process and consolidated through vacuum hot pressing. The as-milled powders were of metastable state and fully transformed into the ß-FeSi₂ phase through subsequent isothermal annealing. The as-consolidated iron silicides consisted of an untransformed mixture of α-Fe₂Si₅ and ?-FeSi phases and a partially transformed β-FeSi₂ phase was found in the low density compact. Isothermal annealing was carried out to induce transformation into a thermoelectric semiconducting β-FeSi₂ phase. The transformation behavior of the β-FeSi₂ was investigated utilizing DTA, SEM, and XRD analyses. Isothermal annealing at 830°C in vacuum led to a thermoelectric semiconducting β-FeSi₂ phase transformation, but some residual metallic α and ?-phases were unavoidable even after 96 hours of annealing. The iron silicide microstructures were investigated using SEM and TEM. The mechanical and thermoelectric properties of the β-FeSi₂ materials before and after isothermal annealing are characterized in this study.     

Alkaline fuel cells: contemporary advancement and limitations

ZeTek Power recently introduced mass manufacturable and cost effective alkaline fuel cells on the market. Today's research is focused on further improvement both in terms of performance increase and cost reduction. This research is classically performed using small (4 cm²) experimental electrodes in the half-cell configuration. This allows the primary electrochemical losses in an anode or cathode to be determined independently. Additional performance losses occur when one integrates large electrodes into a module of 24 cells and in a stack comprised of many modules. By comparing the performance of half-cell experiments to that of modules, these losses can be distinguished and addressed. The information thus obtained, both for the small electrodes and in up-scaling is vital if one is to identify the key areas in which improvement is possible and where to focus future research. Furthermore, the identification of the losses in a module and system allows us to predict the final performance from half-cell measurements of a new laboratory scale experimental electrode.     

Analysis of impersonation attacks on systems using RF fingerprinting and low-end receivers

Recently, physical layer security commonly known as Radio Frequency (RF) fingerprinting has been proposed to provide an additional layer of security for wireless devices. A unique RF fingerprint can be used to establish the identity of a specific wireless device in order to prevent masquerading/impersonation attacks. In the literature, the performance of RF fingerprinting techniques is typically assessed using high-end (expensive) receiver hardware. However, in most practical situations receivers will not be high-end and will suffer from device specific impairments which affect the RF fingerprinting process. This paper evaluates the accuracy of RF fingerprinting employing low-end receivers. The vulnerability to an impersonation attack is assessed for a modulation-based RF fingerprinting system employing low-end commodity hardware (by legitimate and malicious users alike). Our results suggest that receiver impairment effectively decreases the success rate of impersonation attack on RF fingerprinting. In addition, the success rate of impersonation attack is receiver dependent.     

Semi- and fully interpenetrating polymer networks based on polyurethane–polyacrylate systems. VI. Polyurethane–poly(methyl acrylate-co-ethyl acrylate) semi-1-interpenetrating polymer networks

Dynamic mechanical and longitudinal sonic velocity measurements have been made on a series of semi-1-IPNs in which the network component is a polyurethane and the linear constituent a copolymer of methyl acrylate and ethyl acrylate. Dynamic mechanical analysis reveals phase separation. The shifting of the polyurethane glass transition in both the tan δ? and the E″–temperature plots indicates that some mixing occurs. The longitudinal sonic velocity results indicate that the polyurethane is present as a continuous phase in all the materials investigated.     

Direct analysis of annealing of nodular crystals in isotactic polypropylene by atomic force microscopy, and its correlation with calorimetric data

The process of isothermal annealing of nodular monoclinic crystals of isotactic polypropylene (iPP) was analyzed by atomic force microscopy (AFM) and temperature-modulated differential scanning calorimetry (TMDSC). Initially nodular and mesomorphic domains were obtained by controlled melt-crystallization at high cooling rate. Subsequent heating triggers transition from mesomorphic to monoclinic structure, and melting of unstable nodules. Annealing allows re-crystallization, which is recognized by enlargement of domains from initially about 20 nm to about 35 and 55 nm after annealing at 393 and 433 K, respectively. Furthermore, the re-crystallization process is connected with a slight change of the aspect ratio of crystals. The isothermal re-crystallization of the liquid is superimposed by aggregation of crystals, to yield blocky, and string-like objects. The direct analysis of structure on isothermal annealing by AFM is for the first time compared with the isothermal decrease of the apparent specific heat capacity, or change of enthalpy, monitored by TMDSC. The apparent specific heat capacity decreases during annealing with an identical non-linear time dependence as the directly observed growth of the crystal size. Analysis of the annealing processes at different temperatures yields proportionality between the increase of the crystal size and the reduction of the apparent specific heat capacity.     

A secure and improved multi server authentication protocol using fuzzy commitment

Multimedia Tools and Applications - The advancement in communication and computation technologies has paved a way for connecting large number of heterogeneous devices to offer specified services....     

Thermoelectric properties of mechanically alloyed iron disilicides consolidated by various processes

Mn doped p-type iron disilicide powders have been produced by a mechanical alloying process. As-milled powders were of metastable state and mostly transformed to β-FeSi₂ phase by subsequent isothermal annealing. As-milled powders were consolidated by various processes such as sintering of the cold compact in vacuum, vacuum hot pressing (VHP), and spray drying/atmospheric plasma thermal spraying. Phase transitions during the processes were investigated using XRD, EDS, and SEM. As-consolidated specimens consisted of a mixture of α-Fe₂Si₅ and ε-FeSi phases, which were gradually transformed into a thermoelectric semiconducting α-FeSi₂ phase by subsequent isothermal annealing in the vicinity of 845°C in vacuum. However, some residual α and ε phases remained even after prolonged annealing. Thermoelectric properties were measured as a function of temperature and correlated with phase transformation. They showed optimum values in the vacuum hot pressed specimen due to a higher fraction of β phase and/or higher density.     

A probabilistic alternative to regression suites

Automated regression suites are essential in developing large applications, while maintaining reasonable quality and timetables. The main argument against the automation of regression suites, in addition to the cost of creation and maintenance, is the observation that if you run the same test many times, it becomes increasingly less likely to find bugs. To alleviate such problems, a new regression suite practice, using random test generators to create regression suites on-the-fly, is becoming more common. In this practice, instead of maintaining tests, we generate test suites on-the-fly by choosing several specifications and generating a number of tests from each specification.