Impact of adhesive ingredients on adhesion between rubber and brass-plated steel wire in tire

Proficiency on underlying mechanism of rubber-metal adhesion has been increased significantly in the last few decades. Researchers have investigated the effect of various ingredients, such as hexamethoxymethyl melamine, resorcinol, cobalt stearate, and silica, on rubber-metal interface. The role of each ingredient on rubber-metal interfacial adhesion is still a subject of scrutiny. In this article, a typical belt skim compound of truck radial tire is selected and the effect of each adhesive ingredient on adhesion strength is explored. Out of these ingredients, the effect of cobalt stearate is found noteworthy. It has improved adhesion strength by 12% (without aging) and by 11% (humid-aged), respectively, over control compound. For detailed understanding of the effect of cobalt stearate on adhesion, scanning electron microscopy and energy dispersive spectroscopy are utilized to ascertain the rubber coverage and distribution of elements. X-ray photoelectron spectroscopy results helped us to understand the impact of Cu_XS layer depth on rubber-metal adhesion. The depth profile of the Cu_XS layer was found to be one of the dominant factors of rubber-metal adhesion retention. Thus, this study has made an attempt to find the impact of different adhesive ingredients on the formation of Cu_XS layer depth at rubber-metal interface and establish a correlation with adhesion strength simultaneously.     

Studies on the reaction of bis(diisopropyl) thiophosphoryl disulfide with silica in the vulcanization of NR

The reaction between bis(diisopropyl) thiophosphoryl disulfide (DIPDIS) and silica has been investigated. The study reveals that DIPDIS can be used as a coupling agent for silica. The chemical bond between the silanol groups of silica and DIPDIS has been established through the isolation and characterization of isopropyl alcohol that is eliminated from the reaction. The chemical nature of the bond is also supported by the IR analysis of the reaction products of silica and DIPDIS obtained both in the presence and absence of rubber. From the exploratory studies it is indicated that DIPDIS can also react with NR even during mixing of ingredients. When used with 2-mercaptobenzothiazole (MBT) or N-oxydiethylene-2-benzothiazole sulfenamide (OBTS) in the presence of silica, DIPDIS exhibits notable activation of cure and enhances the torque, modulus, tensile strength, and the scorch safety.     

Do Men Advance Faster Than Women? Debunking the Gender Performance Gap in Two Massively Multiplayer Online Games

Prior research on digital games illustrates a perceived gender gap in participation and performance, suggesting men as playing more and better than women. This article challenges the gender gap using longitudinal behavioral data of men and women in 2 MMOs in the United States and China. Results show that women advance at least as fast as men do in both games. Thus, perceived gender‐based performance disparities seem to result from factors that are confounded with gender (i.e., amount of play), not player gender itself. We conclude that the stereotype of female players as inferior is not only false, but also a potential cause for unequal participation in digital gaming.     

A moment-method characterization of V-Koch fractal dipole antennas

This article compares input impedances and radiation characteristics of half wavelength Koch fractal V–electric dipoles having included angles 60°, 90° and 120°. The study considers three structures. In the 1st structure the Koch arms open into the V-region, in 2nd structure they open away from the V-region and in the third structure, one arm opens into and the other away from the V-region. A first iteration, structure 1 of V-Koch electric dipole antenna with included angle of 120° was fabricated and the experimental return loss was in good agreement with simulation. At their first resonances the antennas’ gain and input resistance decrease with decrease in included angles, an observation synonymous to Euclidian electric dipoles. In terms of gain, the first structure is found to give better performance than the other two. For this structure, the pattern distortion at the second resonance was also less compared to the other structures.     

A concurrent two-layer restoration scheme for GMPLS WDM networks

Next generation backbone networks will likely consist of IP routers as well as optical cross connects (OXCs) and will deploy an optical control plane protocol. Generalized Multi Protocol Label Switching (GMPLS) has been proposed as the candidate of choice for the control plane. Optical fibers may carry large volumes of traffic and therefore adequate mechanisms must exist to enable the network to automatically recover from failures of fiber. In mission critical networks survivability becomes very important. We investigate the problem of autonomous recovery in such networks. The literature contains work in this area that investigates the problem of multilayer recovery. Such recovery had only been sequential in the sense that the published work recovers first in the optical domain, assuming the availability of redundant resources, and then proceeds to recover packet label switched paths. We report a recovery procedure for recovering packet label switch paths (packet LSPs) and lambda label switch paths (λLSP) concurrently. We have conducted an OPNET-based simulation study that compares the performance of the concurrent scheme with the previously published sequential two-layer recovery scheme. The study shows that the concurrent two-layer recovery scheme performs as much as forty-four percent faster than the sequential two-layer recovery scheme.     

The Structure And Properties of a Thermo‐mechanically Processed Low Carbon High Strength Steel

Research efforts were given towards development of low carbon high strength steels since recent past. The present study deals with the development of a low carbon high strength steel alloyed with Mn, Ni, Mo, Cu and microalloyed with Ti and Nb. The steel was subjected to three stage controlled rolling operation followed by accelerated cooling. The structure and properties of the steel at various processing conditions were evaluated. Microstructural observation reveals predominantly lath martensite along with twinned martensite structure at all processing conditions. High strength values at higher finish rolling temperatures have been obtained due to fine martensitic structure along with tiny precipitates of microalloying carbide and carbonitride. The strength value increases marginally at lower finishing temperature due to comparatively finer lath size of martensite and increased precipitation density of carbides, carbonitrides along with Cu particles. The variation in impact toughness properties at different finish rolling temperatures is found to be negligible at ambient and subambient temperatures. The formation of stable and large TiN/TiCN particles during casting have impaired the impact toughness values at ambient and at ‐40°C temperatures.     

Differential roles of frequency and meaningfulness in free recall.

Performed 2 experiments with 91 experimentally naive high school students to study the comparative influence of frequency and meaningfulness (m) on free recall. In Exp. I, the free-recall scores of 3 lists of words matched for m but varying in frequency levels were compared. In Exp. II, free recall of 3 lists of words matched for their frequency but varying in their m values were compared. Findings reveal that it is the frequency and not m of the words that influences free-recall, and that the influence of frequency is noticeable in the early trials of free-recall learning. Findings are discussed in terms of the existing theories of verbal learning. (French summary) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Measurement of job and work involvement.

Developed separate measures of job and work constructs using 3 techniques: semantic differential, questionnaire, and graphic. Assessment measures included the Job Involvement and Work Involvement Questionnaires, Job Involvement and Work Involvement Semantic Differentials, and Job Involvement and Work Involvement Graphic scales. Data collected from a heterogeneous sample of 703 employees are analyzed to establish reliability, construct validity, and criterion-related validity of each measure. Results reveal that questionnaire and graphic measures pass the tests of reliability and validity. Semantic differential measures, however, have questionable validity for measuring work involvement and should, perhaps, be limited to only highly educated samples of respondents. Results also support the conceptual distinction between job and work involvement. (19 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)