Photo-Chemically-Deposited and Industrial Cu/ZnO/Al2O3 Catalyst Material Surface Structures During CO2 Hydrogenation to Methanol: EXAFS,XANES and XPS Analyses of Phases After Oxidation,Reduction, and Reaction

Catalysis Letters - Industrial Cu/ZnO/Al2O3 or novel rate catalysts, prepared with a photochemical deposition method, were studied under functional CH3OH synthesis conditions at the set temperature...     

Extranasal Staphylococcus aureus colonization predisposes to bloodstream infections in patients on hemodialysis with noncuffed internal jugular vein catheters

Introduction: Staphylococcal infection of endogenous origin is an important cause of morbidity and mortality in patients who receive hemodialysis (HD). The risk of such infections in nasal carriers of the organism is well defined. Extranasal carriage of the organism at extranasal sites may pose similar risks. Methods: A total of 70 patients about to undergo internal jugular vein catheterization for HD were enrolled in this prospective observational study. Swab cultures were obtained from anterior nares, posterior pharynx, axillae, toe web spaces, and vascular access sites at baseline and 1 week later. A patient was defined as a persistent carrier when the same organism was grown in both samples. Staphylococcus aureus bloodstream infections were assessed by blood and catheter tip cultures over a 90‐day period. Findings: The mean age of the patients was 43.71 ± 16.2 years. Persistent S. aureus carriage at anterior nares, throat, axilla, toe web spaces, vascular access site, and all sites was documented in 27.9%, 11.4%, 40%, 32.9%, 4.3%, and 64.2% of patients, respectively. Fifteen patients developed S. aureus infections. Catheter related S. aureus infections (CRI) were more likely in persistent carriers than nonpersistent carriers with odds ratios (95% CI) of 10.2 (2.8–37.1), 8.6 (1.7–42.2), 17.3 (3.4–86.0), 3.0 (0.9–9.8), and 1.9 (0.2–22.4) for anterior nares, throat, axilla, toe web spaces, and vascular access site carriers, respectively. The probability of developing CRI in persistent S. aureus carriers was 55% compared to none in noncarriers at 90 days (P = 0.04). Discussion: Extranasal S. aureus carriage is as significant a risk factor as nasal carriage for staphylococcal infections in patients on HD through catheters. The study is limited by lack of molecular phenotyping.     

A learning automata-based fault-tolerant routing algorithm for mobile ad hoc networks

Reliable routing of packets in a Mobile Ad Hoc Network (MANET) has always been a major concern. The open medium and the susceptibility of the nodes of being fault-prone make the design of protocols for these networks a challenging task. The faults in these networks, which occur either due to the failure of nodes or due to reorganization, can eventuate to packet loss. Such losses degrade the performance of the routing protocols running on them. In this paper, we propose a routing algorithm, named as learning automata based fault-tolerant routing algorithm (LAFTRA), which is capable of routing in the presence of faulty nodes in MANETs using multipath routing. We have used the theory of Learning Automata (LA) for optimizing the selection of paths, reducing the overhead in the network, and for learning about the faulty nodes present in the network. The proposed algorithm can be juxtaposed to any existing routing protocol in a MANET. The results of simulation of our protocol using network simulator 2 (ns-2) shows the increase in packet delivery ratio and decrease in overhead compared to the existing protocols. The proposed protocol gains an edge over FTAR, E2FT by nearly 2% and by more than 10% when compared with AODV in terms of packet delivery ratio with nearly 30% faulty nodes in the network. The overhead generated by our protocol is lesser by 1% as compared to FTAR and by nearly 17% as compared to E2FT when there are nearly 30% faulty nodes.     

Effectiveness of sodium silicate as gangue depressants in iron ore slimes flotation

The recovery of iron from the screw classifier overflow slimes by direct flotation was studied.The relative effectiveness of sodium silicates with different silica-to-soda mole ratios as depressants for silica and silicate bearing minerals was investigated.Silica-to-soda mole ratio and silicate dosage were found to have significant effect on the separation efficiency.The results show that an increase of Fe content in the concentrate is observed with concomitant reduction in SiO2 and Al2O3 levels when a particular type of sodium silicate at a proper dosage is used.The concentrate of 58.89wt％ Fe,4.68wt％ SiO2,and 5.28wt％ Al2O3 with the weight recovery of 38.74％ and the metal recovery of 41.13％ can be obtained from the iron ore slimes with 54.44wt％ Fe,6.72wt％ SiO2,and 6.80wt％ Al2O3,when Na2SiO3 with a silica-to-soda mole ratio of 2.19 is used as a depressant at a feed rate of 0.2 kg/t.     

Degradation of chlorpyrifos contaminated soil by bioslurry reactor operated in sequencing batch mode: bioprocess monitoring

Bioslurry reactor (SS-SBR) was studied for the degradation of chlorpyrifos contaminated soil using native mixed microflora, by adopting sequencing batch mode (anoxic-aerobic-anoxic) operation. Reactor operation was monitored for a total cycle period of 72 h consisting of 3 h of FILL, 64 h REACT, 2 h of SETTLE, and 3 h of DECANT with chlorpyrifos concentrations of 3000 micrpg/g, 6000 microg/g and 12000 microg/g. At 3000 microg/g of chlorpyrifos concentration, 91% was degraded after 72 h of the cycle period, whereas in the case of 6000 microg/g of chlorpyrifos, 82.5% was degraded. However, for 12000 microg/g of chlorpyrifos, only 14.5% degradation was observed. The degradation rate was rapid at lower substrate concentration and 12000 microg/g of substrate concentration was found to be inhibitory. Chlorpyrifos removal rate was slow during the initial phase of the sequence operation. Half-life of chlorpyrifos degradation (t0.5) was estimated to be 6.3 h for 3000 microg/g of substrate, 17.5 h for 6000 microg/g and 732.2 h for 12000 microg/g. Process performance was assessed by monitoring chlorpyrifos concentration and biochemical process parameters viz., pH, oxidation and reduction potential (ORP), dissolved oxygen (DO), oxygen consumption rate (OCR) and microbial count (CFU) during sequence operation. From the experimental data obtained it can be concluded that the rate-limiting step with the bioslurry phase reactor in the process of chlorpyrifos degradation may be attributed to the concentration of substrate present in either soil or liquid phase. Periodic operations (SBR) by varying individual components of substrate with time in each process step place micro-organisms under nutritional changes from feast to famine and maintains a wide distribution in the population of micro-organisms resulting in high uptake of the substrate in the bioslurry reactor.     

Synthesis,structural and optical properties of CdS nanoparticles with enhanced photocatalytic activities by photodegradation of organic dye molecules

CdS nanoparticles (NPs) were synthesized using co-precipitation method. X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were used to confirm the structures and morphologies of CdS NPs. X-ray diffraction data confirmed the crystal structure of the CdS NPs. Raman spectrum exhibited the Raman modes of LO and 2LO of CdS at 290 and 595 cm^?1 respectively. The evaluated band gap was 3.15 eV, this value was shifted compared with the bulk value and this could be a significance of a size quantization effect in the sample. The CdS nanoparticles showed higher photocatalytic activity for the discoloration of methyl orange (MO) under UV light irradiation for 90 min. The highest photocatalytic activity was obtained with the sample containing 0.3 wt % CdS nanoparticles, in which more than 98 % of the MO was discolored within 90 min.     

Nanostructured, molecularly imprinted, and template-patterned polythiophenes for chiral sensing and differentiation

An innovation to thin-film molecular imprinting is presented for the sensitive detection and effective discrimination of chiral compounds using a portable quartz crystal microbalance transduction technique. The facile approach involves i) colloidal sphere layering of latex particles onto the surface via a Langmuir-Blodgett-like technique followed by ii) template molecular imprinting using electrodeposition of a single functional and cross-linking monomer.     

Estimation of Effect of Fog on Terrestrial Free Space Optical Communication Link

Wireless Personal Communications - Free Space Optical Communication Technology is expected as the successor to the existing communication technologies as many of its features like high bandwidth,...     

Design and analysis of low power high-speed 1-bit full adder cells for VLSI applications

This paper presents a low power and high speed two hybrid 1-bit full adder cells employing both pass transistor and transmission gate logics. These designs aim to minimise power dissipation and reduce transistor count while at the same time reducing the propagation delay. The proposed full adder circuits utilise 16 and 14 transistors to achieve a compact circuit design. For 1.2 V supply voltage at 0.18-μm CMOS technology, the power consumption is 4.266 μW was found to be extremely low with lower propagation delay 214.65 ps and power-delay product (PDP) of 0.9156 fJ by the deliberate use of CMOS inverters and strong transmission gates. The results of the simulation illustrate the superiority of the newly designed 1-bit adder circuits against the reported conservative adder structures in terms of power, delay, power delay product (PDP) and a transistor count. The implementation of 8-bit ripple carry adder in view of proposed full adders are finally verified and was observed to be working efficiently with only 1.411 ns delay. The performance of the proposed circuits was examined using Mentor Graphics Schematic Composer at 1.2 V single ended supply voltage and the model parameters of a TSMC 0.18-μm CMOS.